Halcyon S810 Surface Mounted LED Downlight User manual

  • Hello! I've reviewed the user manual for the HALCYON S810 Luminaire. This document provides detailed instructions on how to install the luminaire safely, including guidelines for mounting on concrete and wood surfaces, as well as crucial electrical safety precautions. I'm ready to answer any questions you have regarding the installation or other aspects of the device based on the information in the manual.
  • Can the light source be replaced?
    Who should install this luminaire?
    What should I do if the external cable is damaged?
2
For indoor use only.
S810
1
OFF
ON
2
1
OFF
ON 2
FIG-1 FIG-2-A
FIG-3 FIG-4 FIG-5
Concrete
Wood board
Please make sure the
thickness of the wood
board no less than 5mm
FIG-2-B
100MM
29MM
If the external flexible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
VER:1.0
brown
green/yellow
blue
NL
N
L
1
1
2
3
1
2
2
2
1
brown
green/yellow
blue
NL
N
L
1
3
4
This luminaire must be installed by a qualified Registered Electrician to
prevent damage to the luminaire and maintain electrical safety.
Caution,risk of electric shock.
/