Rev:
Page:
E.C.O. No: 2 OF 2 Part No: 6100-0088
CUSTOMER SERVICE PHONE: 1-800-426-8562
1
351-076
PROGRAMING THE FOB
1
2
Press Program button (A1) 1x.
Enter Factory Master Code (C1.)
C1
1 2 3 4 5 6
NOTE:
A) For Facility/Station mode the Red led
will illuminate if entered correctly.
B) For User/Locker mode the Green led
will illuminate if entered correctly.
NOTE:
A) If paired the Green led will flash.
B) If the Red led flashes start over with
step 1.
*Once the key fob is paired to a lock, it
will remain paired even if the master
code is changed. If additional fob's are
added to a lock with a new master
code, the original key fob must be re-
programmed to the new master code*
NOTE:
A) For Facility/Station mode the Green
light will illuminate.
B) For User/Locker mode the Green led
will ash once when the program button
is pressed
3Pair the Blue Control fob by closely pointing the Fob directly at the Program button.
Note: The program button is also the IR window.
1
2
1. PRESS
Knob
in unlocked
position
1
1. POINT
A1
B
A1
STATE: PRODUCTION ECO/ECN: 351-076D EFF DATE: 12/24/2019