2. Indy
  3. LRM4 VC VW

Indy LRM4 VC VW User manual

  • Hello! I have reviewed the provided installation instructions for Indy ChromaControl Luminaires and Cylinders. This document includes guidance on wiring, commissioning, and controlling these devices via Bluetooth, DMX, and Ecosystem systems. I am ready to answer any questions you might have about the installation or features.
  • What control systems are compatible with Indy ChromaControl luminaires?
    What is required to commission a Bluetooth enabled luminaire?
    How do I connect a luminaire to an Ecosystem controller?
    How do I connect DMX wires to the luminaire?
INSTALLATION INSTRUCTIONS
These options allow the customer to individually address, control, and manipulate the light on a luminaire-per-luminaire basis. Indy
ChromaControl™ luminaires paired with these options can be controlled by the following systems: Bluetooth, DMX, and Ecosystem.
Bluetooth Enabled Luminaire
1. Install ChromaControl luminaire by following guidelines in supplied installation guide.
2. Supply power to luminaire.
3. Use the Indy™ ChromaControl™ App to commission the luminaire.
4. Refer to instruction sheet 065-1267 for using the Indy™ ChromaControl App.
5. Refer to instruction sheet 065-1141 for connecting 0-10V DIM/CT control (if desired), and 065-1140 for remote control.
Lutron Ecosystem Enabled Luminaire (Color Tuning/Black Body Dimming)
1. Install ChromaControl luminaire by following guidelines in supplied installation guide.
2. Connect Ecosystem E1 and E2 wires from Ecosystem controller (not provided) to Luminaire by wiring the connection inside the
luminaire junction box. Figure 1
3. Supply power to the luminaire.
4. Commission the luminaire using the EcoSystem controller
a. Single channel for Black Body Dimming luminaires (dimming control only)
b. Two channel for Color Tuning luminaires (dimming and CCT control)
For instructions on how to download the lndy™ ChromaControl App and to commission ChromaControl luminaries with your device,
please refer to instruction sheet 065-1267 (For BTA and DXMA only).
LUMINAIRE-MOUNTED DCA
EcoSystem wires on Luminaire (ECOA)
120 VOLT J-BOX WIRING
ECOSYSTEM ENABLED
CONSTANT
VOLTAGE
LED
DRIVER
TO LED
BLACK
WHITE
GREEN
BLACK
RED
THERMAL
PROTECTOR
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
TO
ECOSYSTEM
CONTROLLER
SUPPLY
CONTROLLER
RED
BLACK
LED−
LED+
BLUE
WHITE
BLACK
LINE
COM
GND
DATA (−)
DATA (+)
DATA GRD
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
ORANGE
GREEN
BROWN
E2-PURPLE/WHITE
E1-PURPLE
E1
E2
120 VOLT J-BOX WIRING
ECOSYSTEM ENABLED WHIP
CONSTANT
VOLTAGE
LED
DRIVER
TO LED
BLACK
WHITE
GREEN
BLACK
RED
THERMAL
PROTECTOR
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
TO
ECOSYSTEM
CONTROLLER
SUPPLY
CONTROLLER
WHIP
ASSEMBLY
RED
BLACK
LED−
LED+
BLUE
WHITE
BLACK
LINE
COM
GND
DATA (−)
DATA (+)
DATA GRD
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
ORANGE
GREEN
BROWN
E2-PURPLE/WHITE
E1-PURPLE
E1
E2
277 VOLT J-BOX WIRING
ECOSYSTEM ENABLED WHIP
CONSTANT
VOLTAGE
LED
DRIVER
TO LED
BLACK
WHITE
GREEN
BLACK
RED
THERMAL
PROTECTOR
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
TO
ECOSYSTEM
CONTROLLER
SUPPLY
CONTROLLER
WHIP
ASSEMBLY
RED
BLACK
LED−
LED+
RED
WHITE
BLACK
LINE
COM
GND
DATA (−)
DATA (+)
DATA GRD
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
E2-PURPLE/WHITE
E1-PURPLE
E1
E2
ORANGE
GREEN
BROWN
277 VOLT J-BOX WIRING
ECOSYSTEM ENABLED
CONSTANT
VOLTAGE
LED
DRIVER
TO LED
BLACK
WHITE
GREEN
BLACK
RED
THERMAL
PROTECTOR
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
TO
ECOSYSTEM
CONTROLLER
SUPPLY
CONTROLLER
RED
BLACK
LED−
LED+
RED
WHITE
BLACK
LINE
COM
GND
DATA (−)
DATA (+)
DATA GRD
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
ORANGE
GREEN
BROWN
E2-PURPLE/WHITE
E1-PURPLE
E1
E2
*
Figure 1
1 of 5
Technical Services Phone (888) 387-2212
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/Indy
©2017 Acuity Brands Lighting, Inc. Rev 11/06 065-1270
DISCONTINUED
INSTALLATION INSTRUCTIONS
LUMINAIRE-MOUNTED DCA
Figure 1
EcoSystem wires on Luminaire (ECOA)
347 VOLT J-BOX WIRING
ECOSYSTEM ENABLED
CONSTANT
VOLTAGE
LED
DRIVER
BLACK
WHITE
GREEN
BLACK
RED
TO LED
LED−
LED+
BLUE
ORANGE
GREEN
WHITE
PURPLE
GREY
BROWN
LINE
COM
GRD
THERMAL
PROTECTOR
TO
ECOSYSTEM
CONTROLLER
SUPPLY
CONTROLLER
RED
BLACK
RED
WHITE
BLUE
BLACK
E2-PURPLE/WHITE
E1-PURPLE
E1
E2
RED
347V
WH
COM
347V
XMER
BK
120V
DATA (−)
DATA (+)
DATA GRD
ORANGE
GREEN
BROWN
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
347 VOLT J-BOX WIRING
ECOSYSTEM ENABLED (WHIP)
CONSTANT
VOLTAGE
LED
DRIVER
TO LED
THERMAL
PROTECTOR
TO
ECOSYSTEM
CONTROLLER
SUPPLY
CONTROLLER
WHIP
ASSEMBLY
RED
BLACK
E2-PURPLE/WHITE
E1-PURPLE
E1
E2
BLACK
WHITE
GREEN
BLACK
RED
LED−
LED+
RED
347V
WH
COM
347V
XMER
BK
120V
RED
WHITE
BLUE
BLACK
LINE
COM
GRD
BLUE
ORANGE
GREEN
WHITE
PURPLE
GREY
BROWN
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
DATA (−)
DATA (+)
DATA GRD
ORANGE
GREEN
BROWN
DMX Enabled Luminaire:
1. Install ChromaControl luminaire by following guidelines in supplied installation guide.
2.
Connect DMX wires from DMX controller (not provided) to Luminaire by wiring the connection inside the luminaire junction box: Figure 2
• J-Box and whip assembly (IN and Out Sets) - White/Blue (Data +), Blue/White (Data -), Drain Wire (Data Common) (see termina t ion
resistor wiring diagram, Figure 3)
3.
•Liberty Cable - 24-2P-485 Non-Plenum, 24-2P-P485 Plenum
• Belden Cable - 9842 Non-Plenum, 89842 Plenum
4. Supply power to the luminaire.
5. Commission the luminaire using the DMX controller, with the default slot settings below:
1. DIMMING
2. CCT
3. SATURATION
4. HUE
∗∗For instructions on how to download the lndy™ ChromaControl App and to commission ChromaControl luminaries with your device,
please refer to instruction sheet 065-1267 (For BTA and DXMA only).
Figure 2
DMX wires on Luminaire (DMXA)
120 VOLT J-BOX WIRING
DMX ENABLED
TO DMX
CONTROLLER
CONSTANT
VOLTAGE
LED
DRIVER
THERMAL
PROTECTOR
TO LED
SUPPLY
CONTROLLER
BLACK
WHITE
GREEN
BLACK
RED
LED−
LED+
BLUE
WHITE
BLACK
LINE
COM
GRD
RED
BLACK
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
DATA (−)
DATA (+)
DATA GRD
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
ORANGE
GREEN
BROWN
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−) IN
DATA (+) IN
DATA GRD IN
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−) OUT
DATA (+) OUT
DATA GRD OUT
Fig. 3
CONSTANT
VOLTAGE
LED
DRIVER
120 VOLT J-BOX WIRING
DMX ENABLED (WHIP) THERMAL
PROTECTOR
TO LED
TO DMX
CONTROLLER
SUPPLY
CONTROLLER
WHIP
ASSEMBLY
BLACK
WHITE
GREEN
BLACK
RED
LED−
LED+
BLUE
WHITE
BLACK
LINE
COM
GRD
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
RED
BLACK
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−) OUT
DATA (+) OUT
DATA GRD OUT
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−)
DATA (+)
DATA GRD
ORANGE
GREEN
BROWN
DATA (−) IN
DATA (+) IN
DATA GRD IN
Fig. 3
2 of 5
Technical Services Phone (888) 387-2212
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/Indy
©2017 Acuity Brands Lighting, Inc. Rev 11/0 6 065-1270
DISCONTINUED
INSTALLATION INSTRUCTIONS
LUMINAIRE-MOUNTED DCA
Figure 2
DMX wires on Luminaire (DMXA)
277 VOLT J-BOX WIRING
DMX ENABLED
TO DMX
CONTROLLER
CONSTANT
VOLTAGE
LED
DRIVER
THERMAL
PROTECTOR
TO LEDCONTROLLER
SUPPLY
Fig. 3
CONTROLLER
WHIP
ASSEMBLY
277 VOLT J-BOX WIRING
DMX ENABLED (WHIP)
CONSTANT
VOLTAGE
LED
DRIVER
THERMAL
PROTECTOR
TO LED
TO DMX
CONTROLLER
SUPPLY
Fig. 3
347 VOLT J-BOX WIRING
DMX ENABLED
TO DMX
CONTROLLER
CONSTANT
VOLTAGE
LED
DRIVER
THERMAL
PROTECTOR
TO LEDCONTROLLER
SUPPLY
Fig. 3
347 VOLT J-BOX WIRING
DMX ENABLED (WHIP)
CONTROLLER
WHIP
ASSEMBLY
CONSTANT
VOLTAGE
LED
DRIVER
THERMAL
PROTECTOR
TO LED
TO DMX
CONTROLLER
SUPPLY
Fig. 3
BLUE/WHITE
WHITE/BLUE
DRAIN
TERMINATING
RESISTOR
FIELD
DATA IN
DATA COMMON
DATA (−)
DATA (+)
Figure 3
DMX INTERNAL WIRING
BROWN
GREEN
ORANGE
BROWN
GREEN
ORANGE
3 of 5
Technical Services Phone (888) 387-2212
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/Indy
©2017 Acuity Brands Lighting, Inc. Rev 11/06 065-1270
DISCONTINUED
INSTALLATION INSTRUCTIONS
LUMINAIRE-MOUNTED DCA
These options allow the customer to individually address, control, and manipulate the light on a luminaire-per-luminaire basis. Indy
ChromaControl™ luminaires paired with these options can be controlled by the following systems: Bluetooth, DMX, and Ecosystem.
Bluetooth Enabled Cylinders
1. Install ChromaControl luminaire by following guidelines in supplied installation guide.
2. Supply power to luminaire.
3. Use the Indy™ ChromaControl™ App to commission the luminaire.
4. Refer to instruction sheet 065-1267 for using the Indy™ ChromaControl App.
5. Refer to instruction sheet 065-1141 for connecting 0-10V DIM/CT control (if desired), and 065-1140 for remote control.
Lutron Ecosystem Enabled Cylinders (Color Tuning/Black Body Dimming)
1. Install ChromaControl luminaire by following guidelines in supplied installation guide.
2. Connect Ecosystem E1 and E2 wires from Ecosystem controller (not provided) to Luminaire by wiring the connection inside the
luminaire junction box. Figure 1
3. Supply power to the luminaire.
4. Commission the luminaire using the EcoSystem controller
a. Single channel for Black Body Dimming luminaires (dimming control only)
b. Two channel for Color Tuning luminaires (dimming and CCT control)
Figure 1
EcoSystem wires on Cylinders (ECOA)
120, 277 VOLT J-BOX WIRING
ECOSYSTEM ENABLED (WHIP)
TO ECOSYSTEM
CONTROLLER
CONTROLLER
WHIP
ASSEMBLY
SUPPLY
TO LED
TO DRIVER
347 VOLT J-BOX WIRING
ECOSYSTEM ENABLED (WHIP)
TO ECOSYSTEM
CONTROLLER
CONTROLLER
WHIP
ASSEMBLY
SUPPLY
TO LED
TO DRIVER
E2-PURPLE/WHITE
E1-PURPLE
E1
E2
BLACK
WHITE
GREEN
BLUE
RED
LINE
COM
GND
RED
BLACK
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
DATA (−)
DATA (+)
DATA GRD
ORANGE
GREEN
BROWN
BK
347V
BLUE
208V
WH
COM
347V
XMER
ORANGE
GREEN
BROWN
4 of 5
Technical Services Phone (888) 387-2212
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/Indy
©2017 Acuity Brands Lighting, Inc. Rev 11/06 065-1270
DISCONTINUED
INSTALLATION INSTRUCTIONS
LUMINAIRE-MOUNTED DCA
DMX Enabled Cylinders
1. Install ChromaControl luminaire by following guidelines in supplied installation guide.
2.
Connect DMX wires from DMX controller (not provided) to cylinder by wiring the connection inside the luminaire junction box: Figure 2
• From Whip Assembly to J-Box (In and Out Sets) - White/Blue (Data +), Blue/White (Data -), Drain Wire (Data Common)
see termination resistor wiring diagram, Figure 3)
3.
•Liberty Cable - 24-2P-485 Non-Plenum, 24-2P-P485 Plenum
• Belden Cable - 9842 Non-Plenum, 89842 Plenum
4. Supply power to the luminaire.
5. Commission the cylinder using the DMX controller, with the default slot settings below:
1. DIMMING
2. CCT
3. SATURATION
4. HUE
∗∗For instructions on how to download the lndy™ ChromaControl App and to commission ChromaControl luminaries with your device,
please refer to instruction sheet 065-1267 (for BTA and DXMA only).
Figure 2
DMX wires on Cylinders (DMXA)
120, 277 VOLT J-BOX WIRING
DMX ENABLED (WHIP)
TO DMX
CONTROLLER
SUPPLY
CONTROLLER
WHIP
ASSEMBLY
TO LED
TO DRIVER
BLACK
WHITE
GREEN
RED
BLUE
LINE
COM
GRD
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−) IN
DATA (+) IN
DATA GRD IN
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−) OUT
DATA (+) OUT
DATA GRD OUT
RED
BLACK
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
DATA (−)
DATA (+)
DATA GRD
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
ORANGE
GREEN
BROWN
Fig. 3
DMX ENABLED (WHIP)
TO DMX
CONTROLLER
SUPPLY
CONTROLLER
WHIP
ASSEMBLY
TO LED
TO DRIVER
BLACK
WHITE
GREEN
RED
BLUE
LINE
COM
GRD
BLUE
208VBK
347V
WH
COM
347V
XMER
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−) OUT
DATA (+) OUT
DATA GRD OUT
Fig. 3
BLUE/WHITE
WHITE\BLUE
BARE DRAIN
DATA (−) IN
DATA (+) IN
DATA GRD IN
RED
BLACK
0-10V CCT
COMMON CCT
0-10V DIM
COMMON DIM
DATA (−)
DATA (+)
DATA GRD
BLUE
WHITE
PURPLE
GREY
ORANGE
GREEN
BROWN
ORANGE
GREEN
BROWN
BLUE/WHITE
WHITE/BLUE
DRAIN
TERMINATING
RESISTOR
FIELD
DATA IN
DATA COMMON
DATA (−)
DATA (+)
Figure 3
DMX INTERNAL WIRING
5 of 5
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/Indy
©2017 Acuity Brands Lighting, Inc. Rev 11/06 065-1270
Technical Services Phone (888) 387-2212
DISCONTINUED
/