2. Unbranded
  3. LV2
LV2

Unbranded LV2 Operating instructions

  • Hello, I've reviewed the user manual for the LV2 LED Dimming Driver. This document provides details on its 2-channel 0/1-10V dimming capabilities, including color control and compatibility with various dimmers. It also covers important specifications, installation, and operation. I'm ready to answer your questions about the device.
  • What is the dimming range of this device?
    What types of dimmers are compatible with the device?
    How many LED drivers are recommended to be connected to a single 0/1-10V dimmer?
User Manual Ver 1.0.0
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
0/1-10V
0 -100%
Technical Parameters
Output power 2 x (60-180)W
Output voltage 12-36VDC
Output current 2CH,5A/CH
Input and Output
Input voltage 12-36VDC
Input current 10.5A
Output type Constant voltage
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
Input signal
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
LVD
Model No.: LV2
2 Channel 0/1-10V LED Dimming Driver
0/1-10V CCT dimming/ /PWM Constant voltage output/Logarithmic dimming2 channel
Features
● 2 channel 0/1-10V LED dimming driver, 2 channel PWM constant voltage output.
● For dual color control, the two 0/1-10V input can be set as warm white and cool white respectively,
or one for brightness adjust and the other for color temperature adjust.
● 0~100% dimming range via logarithmic characteristic can be very comfortable for human eyes.
● Compatible with active or passive 0-10V, 1-10V dimmer, can solve the uorescent lamp dimming system
compatible with LED lighting.
LV2 2 Channel 0/1-10V LED Dimming Driver
Page 1
Mechanical Structures and Installations
Wiring Diagram
Dimming curve Logarithmic
2KHz
PWM Frequency
Note:
● The 0/1-10V input is operable via commercially available simple rotary wall switchs designed
for 0/1-10V dimming equipment or from decicated system central dimming controllers.
● Compliant with 0-10V, 1-10V, 10V PWM, RX (4 in 1).
● We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 50 pieces,
The maximum length of the wires from dimmer to LED driver should be no more than 50 meters.
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Certification CE,EMC,LVD
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Output LED +
Output CW LED -
GND
Power input +
Power input -
LED indicator
SET key
Installation rack
Installation rack
114 .00 m m
38 . 00 mm
20 . 00 mm
12-36VDC
+
-
CWGND
CCT
WW
+
LED OUTPUT
0/1-10V INPUT
SETRUN
CW
DIM
WW
Output WW LED -
0/1-10V input (CCT/CW)
0/1-10V input (DIM/WW)
12-36VDC
+
-
CWGND
CCT
WW
+
LED OUTPUT
0/1-10V INPUT
SETRUN
CW
DIM
WW
2CH 0/1-10V dimmer
Power Supply
12-36VDC
Constant Voltage
+
CW
WW Dual color LED strip
LV2
User Manual Ver 1.0.0 Page 2
Key function
Press the "SET" key to switch two dimming mode.
● Set DIM+CCT dimming mode：
Press and hold the "SET" key for 2s, the "RUN" indicator will flash once.
Set DIM dimming input for brightness adjust, CCT dimming input for color temperature adjust (factory setting).
● Set WW+CW dimming mode:
Press and hold the "SET" key for 5s, the "RUN" indicator will flash twice.
Set WW dimming input for WW LED channel brightness adjust, CW dimming input for CW channel brightness adjust.
Dimming Curve
0/1-10V dimming
100
90
80
70
60
50
40
30
20
10
5.0 6.0. 7.0 8.0 9.0 10.0
0/1-10V(V)
1.0 2.0 3.0 4.0
Gamma=1.6
PWM duty(%)
LV2 2 Channel 0/1-10V LED Dimming Driver
0/1-10V CCT
(CW)100
90
80
70
60
50
40
30
20
10
5.0 6.0. 7.0 8.0 9.0 10.0
0/1-10V(V)
1.0 2.0 3.0 4.0
Gamma=1.6
CCT (%)
(WW) 00
/