luminii RGBW-PXSPI 85 Installation guide

Brand: luminii

Model: RGBW-PXSPI 85

Type: Installation guide

The luminii RGBW-PXSPI 85 is a versatile lighting solution that offers a wide range of possibilities for creating dynamic and captivating light displays. With its ability to produce 17.1 lumens per watt and a luminous flux of 792 lumens, this fixture delivers bright and efficient illumination. The RGBW color mixing system allows for customization of the light output, enabling you to choose from a vast spectrum of colors and shades. This opens up endless possibilities for creating unique and immersive lighting experiences.

www.luminii.com T: 224-333-6033REV1.1 03072023 1 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

3.40"

0.65"

1.50"

Ordering Code

MODEL RING DIAMETER1RING TYPE CCT OUTPUT LENS MOUNTING2FINISH POWERFEED

POSITION/TYPE

- - - - - - - -

PX - Plexineon ____ - Ring diameter in

inches, 6”-288”

(24ft)

HR - Horizonal Ring RGB

RGBW

RGBW-PXSPI

RGB

RGBW (3000K)

RGBW Pixel

Control (3000K)

SO - Standard F - Frosted SP

SPD

Suspension Mount, Standard Clips

Suspension Mount, Decorative Clips3

Gloss Grey

Matte Black

Matte Grey

Matte White

B-4 - Male Quick Connect

One End, Female Quick

Connect Other End

1. Rings will be made of equal sections no longer than 96” arc length. Tolerance on size of diameter is +/- 1”.

2. 2 mounting clips included for every 12” of diameter, with a minimum of 3 clips.

3. Decorative Clips match the fixture finish.

Without Mounting Clip With Mounting Clip

and A/C hardware

• Easy to install, for interior and exterior accent lighting

• Neon look providing a crisp, clear line of light visible

for miles

• Mounting Clips and aircraft cable are included in the

appropriate quantities

• Operating Temperature: -40° F to 140° F (-40° C to 60° C)

• 24VDC Class 2

• IK10 and 3G rated

• IP67 rated. IP68 rating available upon specific request

• 5 year warranty indoor, 3 year warranty outdoor

0.40"

1.44"

C US

Technical Information

RING OUTER DIAMETER*

(inch)

Plexineon

RGB

Plexineon

RGBW

Plexineon

Pixel RGBW

EFFICACY 17.5 lm/W 17.1 lm/W 14.7 lm/W

Ø36 (Ø3ft)

Lumen Output 679 lm 792 lm 792 lm

Power

Consumption 38.6 W 46.2 W 53.7 W

Ø72 (Ø6ft)

Lumen Output 1357 lm 1583 lm 1583 lm

Power

Consumption 77.2 W 92.3 W 107.4 W

Ø144 (Ø12ft)

Lumen Output 2714 lm 3166 lm 3166 lm

Power

Consumption 154.6 W 184.7 W 214.9 W

Ø288 (Ø24)

Lumen Output 5429 lm 6333 lm 6333 lm

Power

Consumption 309.1 W 369.5 W 429.8 W

*Rings will be made of equal sections no longer than 96” arc length. Rings exceeding 96W will have

allowances for additional power feeds.

Dominant Wavelength

Color RGB

Red 622nm

Green 525nm

Blue 468nm

RGBW (3000K)

Model TM-30

CRI RfRgR9

RGBW 85 84 98 22

RGBW -PXSPI

85 84 98 22

All channels full on.

www.luminii.com T: 224-333-6033REV1.1 03072023 2 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

Used approximately every 30” of linear/arc

length for Standard Clips and every 18” of

linear/arc length for Decorative Clips

Use to join two fixtures together in the middle

of a Suspended Run

Used at the start of every Suspended Run Used to join two fixtures together and to drop

power in the middle of a Suspended Run

Suspension Hardware

• Suspension Hardware are included with Plexineon runs in the appropriate quantity, every 30” of linear/arc length for Standard Clips and every

18” of linear/arc length for Decorative Clips.

• Standard Clips have a stainless steel finish, Decorative Clip finishes match the fixture finishes.

SP/SPD

Finish Options

0X Clip Finish

00 Stainless Steel

01 Matte Black

02 Matte Grey

03 Matte White

Use for installation of Plexineon into Mounting Clips

SC-1MP2-SCL

Suspension Kit with Single Clip,

Ø2.0” canopy, 150” A/C Cable

SC-1MP2-DCL

Suspension Kit with Joiner Clip,

Ø2.0” canopy, 150” A/C Cable

SC-1FC5-SCL

Powerfeed Canopy Suspension Kit with

Single Clip, Ø5.0” canopy, 150” A/C Cable

SC-1FC5-DCL

Powerfeed Canopy Suspension Kit with Joiner

Clip, Ø5.0” canopy, 150” A/C Cable

70-TOL02-001-01

Mounting Clip Installation Tool

Matte Black Finish

Matte White Finish

Matte Grey Finish

Gloss Grey Finish

www.luminii.com T: 224-333-6033REV1.1 03072023 3 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

Additional Material

• Ordered separately.

CC-2MF-190-SCL

Powerfeed Canopy Suspension Kit with Cross

Cable and 2 Single Clips Ø5.0” canopy

150” A/C Cable

CC-2MF-150-SCL

Powerfeed Canopy Suspension Kit with 2

Cables and Single Clips Ø5.0” canopy

150” A/C Cable

SC-2FC5-DCL

Dual Powerfeed Canopy Standard or

Decorative Joiner Clips

150” A/C Cable

Ring Types

Outer Diameter

Light Direction:

Forward

Horizontal Ring

www.luminii.com T: 224-333-6033REV1.1 03072023 4 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

Additional Material

• Connectors are included in the Plexineon runs per CCT option selected. Some CCT options may include multiple connectors per electrical

junction. Order extras as desired.

Male Quick Connect with flying leads can be

used to make wire jumpers

Use color suffix –08 for Black, -09 for Grey,

or –10 for White

Female Quick Connect with flying leads can

be connected to the Power Supply at the start

of a run. Can also be used with the Male

Quick Connect to make wire jumpers

Use color suffix –08 for Black, -09 for Grey,

or –10 for White

60-H-0002-08

Female Quick Connect

with flying leads, 2-conductor

60-H-0001-08

Male Quick Connect

with flying leads, 2-conductor

60-12-22AWGSBWN

Weatherproof Wire Nut

Silicone Filled

Male Quick Connect with flying leads can be

used to make wire jumpers

Only avaliable in color black

Female Quick Connect with flying leads can

be connected to the Power Supply at the start

of a run. Can also be used with the Male

Quick Connect to make wire jumpers

Only avaliable in color black

60-H-C3-0002-01

Female Quick Connect

with flying leads, 3-conductor

60-H-C3-0001-01

Male Quick Connect

with flying leads, 3-conductor

www.luminii.com T: 224-333-6033REV1.1 03072023 5 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

SC-1FC5-SCL

SC-1MP2-DCL

SC-1MP2-SCL

60-H-C3-0002-01

60-H-C3-0001-01

Sample Layout

PX-48-HR-RGBW-PXSPI-SO-F-SP-GG-B-PFC

Plexineon Horizontal Ring, Suspended Mounting Clips

www.luminii.com T: 224-333-6033REV1.1 03072023 6 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

MODELS PDCU-W

96W

PDCU-W

3X96W

PDCU-D

30W

PDCU-D

60W

PDCU-D

96W

PDCU-D

3X96W

Length 8.66" 11.85" 6.10" 7.93" 8.25" 9.57"

Width 3.73" 4.32" 3.35" 3.35" 4.10" 5.94"

Depth 1.61" 1.81" 1.33 1.32" 1.56" 1.13"

Universal Power Supply 1% 120VAC - 277VAC

MODEL POWER OUTPUT

PDCU-D -IP20 Dry Series 30

3X96

30 W

60 W

96 W

3X96 W

24-24 VDC

PDCU-W - IP66 Wet Series 96

3X96

96 W

3X96 W

0-10V dims down to 1%, MLV/ELV/TRIAC dims down to 1%.

For a complete list of compatible dimmers, see Compatible Dimming Chart on

the Resources page.

0-10V Dimming Power Supplies 0.1% 120VAC - 277VAC

MODEL POWER OUTPUT DIMMING

- - -

PS010V - 0-10V Power Supply

dims down to 0.1%

3X96

96 Wat t

3 X 96 Watt

24-24 VDC LIN

LOG

Linear

Logarithmic

MODELS 96W 3X96

Length 14.40" 15.75"

Width 5.20" 6.62"

Depth 2.60" 4.95"

24V DC+

24V DC-

LineLED

Load

Ground

Neutral

PDCU-W/PDCU-D

DIM +

DIM -

To 0-10V Dimmer

(if applicable)

LineLED

24V DC+

24V DC-

DIM +

DIM -

OUTPUT

0-10 controller wires to the next LED Driver

To 0-10v Dimmer

(if applicable)

PS010V-96

Load

Ground

Neutral

PS010V-3X96

LineLED

96W Max

per terminal

24V DC+

24V DC-

24V DC+

24V DC-

24V DC+

24V DC-

Load

Ground

Neutral

OUTPUT

0-10 controller wires

to the next LED Driver

INPUT

120 - 277VAC

DIM +

DIM -

To 0-10v Dimmer

(if applicable)

Power Supplies

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

Note: All Power Supplies come with one quantity of HS-STW01-50-00 (50ft of 14 Gauge wire black jacket, 2 conducters)

www.luminii.com T: 224-333-6033REV1.1 03072023 7 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

Non-Dimming Power Supply 120VAC - 277VAC

MODEL POWER OUTPUT DIMMING LOCATION

- - - -

PSV - PSV Series 96-96 Wat t 24-24 VDC U2ND - Non Dimming D-Damp

MODELS 96W

Length 14.40"

Width 5.20"

Depth 2.60"

DALI 0% Dimming Power Supplies 120VAC - 277VAC

MODEL POWER OUTPUT

- -

PSDALI - DALI Power Supply

dims down to 0%

3X96

96 Wat t

3 X 96 Watt 24-24 VDC

Features eldoLED’s LINEARdrive configurable dimmable drivers

Model 96W 3X96

Length 14.40" 15.75"

Width 5.20" 6.62"

Depth 2.60" 4.95"

Load

Ground

Neutral 120 - 277VAC

PSDALI-96

lineLED 96 W max

24V DC+

24V DC-

OUTPUT

Dali controller wires

to the next LED Driver

To Dali

controller

INPUT

LineLED

96W Max

per terminal

24V DC+

24V DC-

24V DC+

24V DC-

24V DC+

24V DC-

Load

Ground

Neutral

INPUT

120 - 277VAC

DIM +

DIM -

OUTPUT

Dali controller wires

to the next LED Driver

To Dali

controller

PSDALI-3X96

120 - 277VAC

lineLED 96 W max

24V DC+

24V DC-

Load

Ground

Neutral

PSV-96-24-ND-D

120 - 277VAC

To on/off Switch

INPUT

Power Supplies

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

Note: All Power Supplies come with one quantity of HS-STW01-50-00 (50ft of 14 Gauge wire black jacket, 2 conducters)

DMX Dimming Power Supplies 120VAC - 277VAC

MODEL POWER OUTPUT

- -

PSDMX -DMX Power Supply

dims down to 0%

3X96

96 Wat t

3 X 96 Watt 24-24 VDC

Features eldoLED’s LINEARdrive configurable dimmable drivers

MODELS 96W 3X96

Length 14.40" 15.75"

Width 5.20" 6.62"

Depth 2.60" 4.95"

D-

GND

RGBW 96 W max

Load

Ground

Neutral

DMX cables

(For DMX cable,

use Belden 9829,

9842 or CAT5

shielded twisted

pair cabling

or equivalent) to the next

LED Driver

INPUT

120 - 277VAC

D+

+ R G B W

To Controller

PSDMX-96

Dynamic white lineLED

DMX cables

(For DMX cable, use

Belden 9829, 9842

or CAT5 shielded

twisted pair cabling or

equivalent)

Load

Ground

Neutral

INPUT

120 - 277VAC

D-

D+

GND

to the next

LED Driver

To Controller

96 W max per terminal block

RGBW

lineLED

PSDMX-3X96

www.luminii.com T: 224-333-6033REV1.1 03072023 8 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

MODELS L3D0

Length 10.50"

Width 5.50"

Depth 2.00"

MODELS LTEA41UKL-CV240 L3DA4U1UKL-CV240

Length 4.89" 4.98"

Width 4.00" 4.00"

Depth 2.62" 2.62"

MODEL

LTEA4U1UKL- CV240

Lutron - Hi-lume™ 1% 2-wire LED Driver

40W max

(120V forward phase only)

MODEL

L3DA4U1UKL-CV240

Hi-lume™ 1% EcoSystem Voltage LED driver

40W max

Luminii is a Lutron OEM Advantage Partner

Lutron Power Supplies 1%

MODEL

L3D0-96W24V-U

Hi-lume™ 0.1% EcoSystem Voltage LED Driver with Soft-On, Fade-to-Black™

96W max

Luminii is a Lutron OEM Advantage Partner

Lutron Power Supplies 0.1%

In-Ground Power Supplies

MODEL POWER OUTPUT INPUT

- - - -

IG-In ground CVE Series CVE

DALI -

-ELV Dimming

eldoLED Dali

dimming

96X2 - 2 X 96 Watt 24-24 VDC Blank

277

120 V

240/277 V

Both dims down to 0%

MODELS Dual

Circuit

Length 8.40"

Width 8.30"

Depth 8.10"

(Purple)

To EcoSystem

Digital Link

Load

Ground

Neutral

24V DC+

24V DC-

L3DA4U1UKL-CV240

LineLED

To 2-wire

dimmer

Load

Ground

Neutral

24V DC+

24V DC-

LTEA4U1UKL-CV240

LineLED

To 2-wire

dimmer

Load

Ground

Neutral

24V DC+

24V DC-

LineLED

(Purple)

To EcoSystem

Digital Link L3D0-96W24V-U

lineLED 96 W max

24V DC+24V DC-

IG-CVE-96X2-24

Load

Neutral

LINE VOLTAGE INPUT

120V AC

(if applicable)

Power Supplies

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

Note: All Power Supplies come with one quantity of HS-STW01-50-00 (50ft of 14 Gauge wire black jacket, 2 conducters)

www.luminii.com T: 224-333-6033REV1.1 03072023 9 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

DMX Decoder

DMX signal to RGBW decoder (required to operate DMX controller) (for RGB and RGBW only)

Translates controller DMX512 programs for RGB and white LED strips.

Unique DMX address for the decoder can be set easily and displayed by the numeric display on

the case. Changing and resetting the DMX address requires manual input.

Use power repeater to expand output.

Operating Voltage

12-36 VDC

Power Capacity

up to 96W at 24V

Operating Temperature Range

from -4˚F to +122˚F in case

ORDERING CODE

MODEL

DDMX-RGBW

DDMX-RGBW - DMX decoder

DMX /Wireless RGB-W wall-mount controller controls DMX lighting fixtures, wireless control of

RGB-W lighting fixture or use both simultaneously. Fits in any standard US switch box. Includes all

the outputs in the back of the controller.

Control brightness levels with a single touch, personalize and memorize 3 different scenes, and

even create 3 variations of white.

Features

• 2 in 1 in-Wall Controller: DMX Control or

Wireless RGB-W

• 65,000 Color Options, Dimming and

Speed Control

• Memory Function

• 50 Foot Wireless Range

• Easily Fits Standard US Switch Boxes

• Touch Sensitive Glass Surface

• Includes 10 Built in Programs, or Create and

Play Your Own

Operating Voltage

12 - 24V DC

Color Parameters

• Brightness

• Saturation

• Primary colors

• Fading

• Color changing speed

DMX-1Z-RGBW, DMX-3Z-RGBW

RGBW LED 1 or 3 Zone Controller (for RGB and RGBW only)

ORDERING CODE

MODEL ZONES COLOR

- -

DMX - DMX

Controller

Three Zone

One Zone

RGBW - Red,

Green,

Blue,

& White

www.luminii.com T: 224-333-6033REV1.1 03072023 10 | 10

RGB, RGBW and RGBW Pixel

Plexineon Rings

Suspended MountSuspended Mount

Touch DMX Controller

Touchscreen digital LED controller

Programmable advanced DMX512 lighting controller featuring a touch-screen interface.

Operates as stand alone controller or integrated with most architectural lighting control

systems. Can controller endless DMX512 enabled devices.

Mounts to standard single or dual gang wall box with the included power supply inside

the junction box. Terminal block design for power and data connections.

Features

• Sleek glass design which sits 0.43” from the

wall

• Graphical color display to show selected

environment

• Color/dimmer/speed palette

• Color temperature mixing

• Touch sensitive buttons. No mechanical parts

• Touch sensitive wheel allows for accurate

color selection

• Multi-zone microSD memory

• Multi-room control with 500 scenes, 10

zones

• 1024 DMX channels. Control 340 RGB

fixtures

• USB & Ethernet connectivity for programming

and control

Power Supply

7 VDC (included)

Programmability

PC, Mac, Tablet, Smartphone

Output Signal

DMX512 (1024 channels)

Color Parameters

• Brightness

• Saturation

• Speed of color changing sequence

• Fading / dimming / brightness

ORDERING CODE

MODEL

TSDMX-E

TSDMX-E - Touchscreen DMX controller

The SR-DMX-SPI is a smart LED pixel decoder that controls

RGB/RGBW pixel LED strips with SPI signal. Designed with a digital display,

the pixel controller allows for easy configuration of most settings. Three push

buttons are available for control of the LED functions.

Operating voltage

5-24 VDC, Max 12A

Power capacity

up to 96W at 24V

Operating temperature range

from -4˚F to +122˚F in case

Features

- SPI signal output for RGB/RGBW

pixel light control

- DMX512 controllable

- 52 DMX decoding channels

- Works with integrated DMX

consoles and sequencing

software

- Display panel allows for easy

configuration

Model

SR-DMX-SPI

SR-DMX-SPI - Smart Pixel Decoder

Smart Pixel Decoder

PIXEL PLEXINEON

Out

(-)

(+)

POWER SUPPLY

(N)

(L)

CONTROLLER WIRES

1000 ft max,

decoder to Controller

input

output

24VDC

32 ft max, decoder to strip

SPI signal to DMX signal decoder

MODELS SR-DMX-SPI

Length 6.93"

Width 1.8"

Depth 1.18"

luminii RGBW-PXSPI 85 Installation guide

luminii RGBW-PXSPI 85 Installation guide

luminii RGBW-PXSPI 85 Installation guide

Related papers

Other documents