103GMC
V.01092023
02
Before beginning the assembly process,
ensure all boxes and parts have been delivered.
STOP!
FOR BEST RESULTS:
Do not throw away packaging materials until assembly is complete.
Assemble item on a soft surface, such as cardboard or carpet, to protect finish.
Proper assembly requires two people.
SUPPORT SITE
View our assembly video online
WWW.MANHATTANCOMFORT.COM
Stuck? Question? We are here to help.
tel: 908-888-0818
e-mail: help@manhattancomfort.com
TOOLS REQUIRED
ATTENTION: BEFORE START ASSEMBLING TAKE A PICTURE OF
THE LABELS ON THE PACKAGES, THIS WILL BE RECQUIRED IN
CASE THE PRODUCT HAS ANY ASSISTANCE DEMAND.
Prepare the room before starting the assembly, leaving it completely clean
and the area in good condition to start the work.
Use the cardboard of the packaging to separate and support the parts
removed from the boxes.
Recommended tools (not included)
x01
30.15"
7.28"
35,24"
33.54"
7.00"
33.54"
7.00"
33.54"
7.00"
17.52"
11 lb
Rear view
11 lb
03
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Base
Left side panel
Right side panel
Top panel
Lower back panel
Front of the drawer
Left side panel of the drawer
Right side panel of the drawer
Rear panel of the drawer
Base of the drawer
Decorative apply
Feet
Upper back panel (hole)
Plastic union profile
01
01
01
01
01
03
03
03
03
03
03
04
01
01
Nº Description Qty.
12
10
09
06 11
08
07
Parts
Hardware
01
02
04
05
13
14
03
16x
A16x
B08x
C16x
D
16x
E53x
F28x
G01x
H
12x
I01x
J01x
K16x
L
15
15 Slides 03
04
LEFT PANEL SLIDES
RIGHT PANEL SLIDES
*plastic wheel always pointed to the ground.
*plastic wheel always pointed to the ground.
HOW TO IDENTIFY THE SLIDES?
R
L
WICH HOLES TO ATTACH THE SCREWS?
R
L
05
Step 01
F = 18x
F
ATTENTION!
It is mandatory to apply the
screw (F), observe there is
no hole at this position.
Rear side
F
F
02
F
F
15
15
F
F
15
Rear side
F
F
03
F
F15
15
F
F
15
06
Step 02
Step 03
Insert the hardware (C) into the parts 02 and 03.
C = 08x
Connect the part 02
onto the part 01 with
the hardware (B).
B = 02x
Attention, all the assemblage must be done on the cardboard
box or the Styrofoam boards to avoid damage to the parts.
C
C
C
C
B
B
Rear side
Rear side
03
Rear side
C
C
C
C02
Rear side
02
01
07
Step 04
B = 02x
Step 05
Apply the hardware (D) into the part 04.
D = 04x
Rear side
D
D
D
D
Connect the part 03
onto the part 01 with
the hardware (B).
B
B
03
01
Rear side
Rear side
04
02
Rear side
08
04
Step 06
Connect the part 04 onto the parts 02 and 03 with the hardware E.
E = 04x
L = 04x
Apply the hardware (L) onto the hardware (E).
03
01
Rear side
Rear side
E
E
Rear side
L
E
E
E
02
Rear side
E
09
Step 07 Pay attention to the correct position of the feet.
The arrows refers to the correct hole to align the feet.
01 01
Connect the parts 12 onto the part 01 with the hardware (A).
A = 16x
03
01
Rear side
Rear side
02
Rear side
Rear side
A
Use some pieces of Styrofoam boards (package part)
to avoid contact of the feet (part 12) with the floor.
A
Rear sideRear side
A
A
Styrofoam board
12
10
Step 08
Connect the part 14 onto the part 05, and connect the part 13 into the part 14.
And then, connect the part 13 using the hardware (G).
G = 28x
Attention, all the parts must be connected on the rear side!
14
13
05
Attention to the position of the part 13.
01
Rear side
02
Rear side
Rear side
Use a try square to align the dresser before start nailing the part 05 with the hardware (G).
05
G
Rear side
03
1413 G
11
Step 09
Step 10
Apply the hardware (D) into the part 06.
D = 12x
DD
DD
06
Connect the part 11 onto the part 06 with the hardware (F).
F = 09x
F
F
F
11
Connect the parts 07, 08 onto the part 06 with the hardware E.
E = 12x
L = 12x
Apply the hardware (L) onto the hardware (E).
L
E
E
EE
06
08
07
E
E
E
Before applying the part 11, observe if your product has the option of matching colors
with the front of the drawer (part 06).
12
Step 11
Step 12
06
08
07
10
Apply the part 10 in the groove of the parts 07, 08 until the groove of the part 06.
08
Connect the part 09 onto the parts 07, 08 with the hardware (B).
B = 12x
BB
09
BB
07
13
Step 13
Step 14
Apply the hardware (I + F) into the groove of the part 06 as shown on detail.
I = 06x
F = 06x
I
I
F
I
06
06
I
I
09
F
I
Apply the hardware (I + F) into the groove of the part 09 as shown on detail.
I = 06x
F = 06x
09
14
Step 15
F = 12x
F
F
F
F
08
07
Attention!
Assemble item on a soft surface,
such as cardboard or carpet,
to protect finish.
*plastic wheel always pointed
to the rear panel of the drawer
part 09.
09
06
You must apply the screws
on the holes
indicated by the arrows.
15
15
15
Step 16
Wall
First, approach the furniture as close as
possible to the wall.
Then, pass the hardware (K) through the hole of the part (13) from inside
to the outside as shown in the figure above until it reaches the wall.
13
K
K = 01x
04
Attention! Tipover system.
16
Step 17 Attention! Tipover system.
You will need a pencil to mark where you should drill the wall with a
3/8" drill bit to put in the hardware (J).
Press the wings of the hardware (J) and put it in to the hole
that you drilled on the wall.
Use the 3/8" drill bit to drill the wall.
K
J J J
J = 01x
17
Step 18 Attention! Tipover system.
K
J*Hardware (J) plugged
in the wall.
H
Connect the hardware (K) on the wall, using the hardware (H).
K
F
F
Connect the hardware (K), under the part 04 with the hardware (F).
F = 02x
H = 01x
18
Step 19
Install the drawers fitting them into the slides fixed on the parts 02,03.
02
03
19
319 Ridge Rd. Dayton, NJ 08810
908-888-0818
All Manhattan Comfort furniture products are warranted, to the original purchaser at the
time of purchase and for a period of 30 days thereafter.
Our warranty is limited to new products purchased in factory sealed cartons. This wa-
ranty is valid in the United States of America and Canada.
In order to provide you with timely assistance, please thoroughly inspect your furniture
for missing or defective parts immediately after opening the carton.
Manhattan Comfort offers a 30-day parts replacement warranty on all items.
Our furniture products are no intended for outdoor use.
WARRANTY POLICY
THE WARRANTY DOES NOT COVER:
- Defects/damages by improper assembly or disassembly.
- Defects/damages caused by shipping. Claims for damage during transit shoud be
placed immediately to the transportation company.
- Defects/damages caused by inappropriate use of the furniture.
/
