DR-501
REV. 01
SUPPORT SITE
QR CODE
Stuck? Question? We are here to help.
tel: 908-888-0818
e-mail: [email protected]
View our assembly video online:
WWW.MANHATTANCOMFORT.COM
TOOLS REQUIRED
•Do not throw away packaging materials until assembly is complete.
•Assemble item on a soft surface, such as cardboard or carpet, to protect finish.
•Proper assembly requires two people.
FOR BEST RESULTS:
Before beginning the assembly process,
ensure all boxes and parts have been delivered.
STOP!
STOP!
Included in this package:
03
01
02
03
04 05
07
08
09
11
13
16
14
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
14.
15.
16.
Top Panel
Plastic H-Profile
Back Panel
Left Side Panel
Right Side Panel
Bottom Panel
Feet Crossbar
Foot
Top Drawer Front
Drawer Front
Drawer Back
Drawer Right Side
Drawer Left Side
Drawer Bottom
Drawer Support
Top Drawer Support
x1
x1
x2
x1
x1
x2
x1
x2
x1
x2
x3
x3
x3
x3
x3
x1
06
10
03
08
11
12 12
13
14
15 15
44Lb
13Lb
13Lb
A x 36
#23857
B x 6
#PX.017
C x 2
#CA.002
D x 1
#2196
E x 12
#69
F x 18
#10385
G x 6
#292
H x 6
#11170
I x 4
#284
J x 12
#259
K x 18
#10386
L x 20
#1616
M x 28
#393
TIPOVER
RESTRAINT KIT
N x 1
#KT.002
O x 6
#PA.006
Included in this package:
04
01
02
Fix the hardware C to part 07 with screw L.
Then, attach the parts 07-08 with the hardware A.
A
A
A
A
C
C
L
L
Fix the part 07 to part 08 with screw L.
L
L
L
L
L
L
07
08
05
07
08
08
A x 4 C x 2 L x 4
L x 4
03
04
Fix the part 06 to parts 07-08 with screw G and tool D.
Attach the parts 04-05 to part 06 with hardware A.
Then, fix them with screw H.
Pay attention in detail to ensure correct assembling.
Rear Side
H
H
H
H
H
H
A
A
A
A
Rear Side
Rear Side
07
06
05
04
G
GG
GG
D
08
08
G
06
06
G x 6D
A x 4 H x 6
05
06
Fix the hardware F to part 01.
Attach the part 01 to parts 04-05 with hardware #A.
Then, apply the hardware K and lock it according the example below.
Pay attention in detail to ensure correct assembling.
Rear Side
Rear Side
A
A
A
K
K
K
K
K
K
K
Rear Side
A
07
04
01
F
05
F
F
FF
F
F
01
F x 6
A x 4 K x 6
07
08
Attach the parts 03 to part 02 according the example.
Then, position correctly both them and fix them with the hardware #M.
Fix hardware F to parts 09 and 10.
Rear Side
F
x2
F
F
F
F
F
F
F
08
M
10
04
02
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
09
M
M
M
M
M
Pay attention in detail to
ensure correct assembling.
Pay attention in detail to ensure correct assembling.
02
03
03
03
03
M x 28
F x 12
09
10
Specially to part 09, fix the part 16 with screw I.
Please, start by fixing the ends. Then fix the intermediate screws.
Attach the parts 09 to parts 12-13 with hardware A.
Then, apply the hardware K and lock it according the example below.
Equaly, the same process is apllied to parts 10-12-13.
09
10
x2
K
K
K
K
K
K
K
A
A
A
A
K
K
12
13
I
I
I
I
13
12
A
A
A
A
09 16
09
TOP DRAWER
I x 4
A x 12 K x 12
11
12
10
14
14
15
15
x2
10
09
A
A
13
12
12
13
TOP DRAWER
13
13
15 15
12
09 10
x2
11
11
12
A
A
E
E
E
E
E
E
E
E
TOP DRAWER
Apply the part 14 in the groove of the parts 12-13.
Then, attach the part 15 to parts 09-10 with hardware A.
Attach the part 11 to parts 12-13-15 with the hardware A.
Then, fix the parts 12-13 to part 11 with screw E.
A x 6
A
A
A x 6 E x 12
A
A
13
14
11
Apply the hardware B to parts 09-10.
Then, fix them with screw J.
x2
10
09
Rear Side
Rear Side
B
B
B
B
#259
#259
#259
#259
J
J
J
J
TOP DRAWER
Before to fix the Drawers, you must extract the full extension of the Slides, by pulling off.
Then, pay attention to the correctly holes according to the next steps.
Front Side
J x 12 B x 6
15
16
The Drawers have pre-set holes to help you on fixing them.
Set the Drawer on correct position and pre-set holes, carefully.
Firstly, make sure that the Drawer is correctly positioned according to the detail
The correct holes of the Slides must match with the pre-set holes of the Drawers.
Position and fix them with the screw #1616.
12
L
09
08
L
L
L
ATTENTION: extremely necessary
a second person helping.
ATTENTION: extremely necessary
a second person helping.
L x 4
Drawer pre-set holes
17
18
You must put a drawer opening limiter screw.
Firstly, keep the drawer partially open so that the limiter screw hole is behind the
limiter bracket according to the detail.
ATTENTION: ensure the limiter screw hole is before the limiter bracket.
Then, place the screw #PA.006 to retain the full opening of the drawer.
13
Limiter bracket
Limiter screw hole
Limiter screw hole
Limiter bracket
Limiter bracket
O
OO
O
O x 2
19
20
Apply the same fixing Drawers process and drawer opening limiter to the others drawers.
You must install the Tipover Restraint Kit (N) provided, in the rear side of the furniture.
Position the hardwares #18256EXP and #20522.
Fix them with screw #11179.
14
09
10
10
#2610 x 1
#16973 x 1
#11179 x 1
#20522 x 2
#18256EXP x 1
TIPOVER
RESTRAINT KIT
Rear Side
#11179
#20522
#18256EXP
L x 8O x 4
21
22
Approach the furniture as close as possible to the wall.
Then, mark with a pencil where you should drill the wall to put in the hardware.
Put in the hardware #16973 to the hole that you drilled on the wall.
Then, position the hardwares #18256EXP and #20522.
Finally, fix them with screw #2610.
15
Use a Ø8mm drill bit to drill the wall.
Wall
#18256EXP
#20522
#2610
#16973
#16973
#20522
#18256EXP
#2610
319 Ridge Rd. Dayton, NJ 08810
908-888-0818
All Manhattan Comfort furniture products are warranted, to the original purchaser at the
time of purchase and for a period of 30 days thereafter.
Our warranty is limited to new products purchased in factory sealed cartons. This war-
ranty is valid in the United States of America and Canada.
In order to provide you with timely assistance, please thoroughly inspect your furniture
for missing or defective parts immediately after opening the carton.
Manhattan Comfort offers a 30-day parts replacement warranty on all items.
Our furniture products are not intended for outdoor use.
THE WARRANTY DOES NOT COVER:
- Defects/damages by improper assembly or disassembly.
- Defects/damages caused by shipping. Claims for damage during transit should be
placed immediately to the transportation company.
- Defects/damages caused by inappropriate use of the furniture.
WARRANTY POLICY
/
