Julian Bowen CAM021 Assembly Instructions

548mm

ASSEMBLY

INSTRUCTIONS CHANGING STATION

Approximate Assembly Time

Before you start….

Please carefully unpack and lay out all of the component parts to ensure nothing

is missing and to check each component for any obvious damage.

Should you identify any concerns at this stage please contact the retailer from

whom this product was purchased. Please quote your order number, details of

your issue, the product code, and the batch number from the cartons which will

help to resolve your issue as quickly as possible.

Version Number - 1.0 Product Code - CAM021

People Required to Assembly Tools Required

1:30hrs

02

6x30mm 44x

AB

GIJ

H

C

28x

12x 15x11mm 8x30mm

02x 06x

06x18x

8x8mm 150x15mm 30x30mm 45x35mm

18x

E

4x30mm

F

03x

4x25mm

K

10x

3,5x16mm

N

44x

P

02x

6,5x35mm 88x20mm

01x

D

18x18mm

L

16x

4x12mm

M

01x

690x20mm

O

04x

44x34mm

Please check all hardware matches the list below. Should

you notice any are missing please contact your retailer.

We strongly advise that you do not use Power Tools, such as

drills or electric screwdrivers during the assembly as this

may cause irreparable damage and will invalidate your

warranty.

03

3x

07

02

04

07

06

08

06

04 05

01

03

17 16

15

16

13

11

14

12

09

10

Please ensure you carefully check all the pieces, should you have any

concerns please contact the retailer before assembly commences.

Please have your order number, details of the issue, the product code,

and the batch number from the cartons as this will help us to resolve

your issue much faster. 04

Safety Information

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

WARNING! To prevent your furniture tipping and causing serious or fatal

injuries, ensure this product is permanently fixed to the wall and the

correct fitting type is used. The fitting included with this product is

intended for securing the safety device to the product. If in doubt seek

professional advice.

WARNING! Do not leave your child unattended.

WARNING! Do not move the changer with a child on it.

WARNING! Be aware of the risk of open fire and other sources of strong heat,

such as electric bar fires, gas fires, etc, in the vicinity of the product.

WARNING! Do not use the product if any part is broken, damaged torn or

missing, approved replacement parts can be obtained from Julian Bowen

Limited.

An older child climbing on the changing unit while a child is on the

changing surface is extremely dangerous and must be discouraged.

Keep away from trailing cords, drapes or flexes, and away from electric

sockets.

All assembly fittings should be tightened properly, checked regularly and

re-tightened as necessary.

The product must be used on a level and stable surface.

When lockable castors / wheels are fitted, ensure they are locked when the

changing unit is in use.

A changing mat should always be used. Recommended size is 75cm x

46cm approximately.

Once assembled do not dismantle.

Suitable for a child up to 12 months or a maximum weight of 11 kg.

This product conforms to BS EN 12221-1:2008 + A1:2013. 05

03

02

05

06

07

06

08

07

1

2

N18x

18x

B

J

K

C

18x

2x

01

05

06

08

07

02

06

D

K

2x

O

L

4x

6x

06

03

F

K

01

3

4

07

04

M

04

G

5

08

10

I

E

09

I

E

11

12

14

E

10

13

09

9

N

18x

B

A

12x

8

7

6

3x

3x 3x

3x

11

12

14

3x

C

6x

09

10

11

16

17

15

N8x

8x

B

C

4x

2x

10

12

13

17

16

15

16

L

11

H

K

14

2x

12

Use as necessary

2x

P

15

13

ADDITIONAL SAFETY INFORMATION

WARNING: In order to prevent overturning the wall attachment

must be used with this product.

In the interest of safety, particularly where small children are

concerned, we advise securing your furniture to the wall to prevent the

product tipping forward when loaded.

This product is heavy and could cause serious or fatal injury if not

used or moved correctly.

The screw included in the fitting pack is only intended for fixing the

safety strap to the piece of furniture.

Hardware to attach the strap/s to the wall are NOT INCLUDED. Use

fixing devices suitable for the walls in your home (not included). If you

are unsure what type of fixings to use, please seek further advice from

your local DIY store.

GENERAL CARE & MAINTENANCE

We advise that when cleaning the product that a damp cloth is used.

Avoid the use of all household cleaners and abrasive.

Never push or drag the furniture.

Never attempt to move the furniture when fully loaded.

We advise that periodically all fixings are re-tightened.

14

Julian Bowen CAM021 Assembly Instructions

Julian Bowen CAM021 Assembly Instructions

Related papers

Other documents