Tyan S5530 User manual

http://www.tyan.com

1

S5530

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter1: Instruction

This chapter describes the features of the motherboard and the new technology it

supports.

Chapter2: Board Installation

This chapter lists the hardware setup procedures that you need to abide by when

installing system components. It includes description of the jumpers and connectors

on the motherboard.

Chapter3: BIOS Setup

This chapter tells how to change system settings through the BIOS setup menu.

Detailed descriptions of the BIOS parameters are also provided.

Chapter4: Diagnostics

This chapter introduces some BIOS codes and technical terms to provide better

service for the customers.

Appendix I: Fan and Temp Sensors

This section aims to help readers identify the locations of some specific Fan and

Temp Sensors on the motherboard. A table of BIOS Temp sensor name

explanation is also included for readers’ reference.

http://www.tyan.com

3

Contents

Before you begin…....................................................................................4

Chapter 1: Instruction ................................................................................ 5

1.1 Congratulations .................................................................................5

1.2 Hardware Specification......................................................................5

1.3 Software Specifications.....................................................................7

Chapter 2: Board Installation..................................................................... 9

2.1 Board Image....................................................................................10

2.2 Block Diagram.................................................................................11

2.3 Mainboard Mechanical Drawing......................................................12

2.4 Board Parts, Jumpers and Connectors...........................................13

2.5 Installing the Processor and Heatsink.............................................25

2.6 Thermal Interface Material ..............................................................29

2.7 Tips on Installing Motherboard in Chassis ......................................30

2.8 Installing the Memory ......................................................................32

2.9 Attaching Drive Cables....................................................................36

2.10 Installing Add-In Cards..................................................................37

2.11 Connecting External Devices ........................................................38

2.12 Installing the Power Supply...........................................................40

2.13 Finishing Up...................................................................................41

Chapter 3: BIOS Setup .............................................................................43

3.1 About the BIOS................................................................................43

3.2 Main Menu.......................................................................................45

3.3 Advanced Menu...............................................................................46

3.4 Chipset Menu ..................................................................................74

3.5 Boot .................................................................................................84

3.6 Security............................................................................................87

3.7 Server Management........................................................................88

3.8 Save & Exit......................................................................................90

Chapter 4: Diagnostics............................................................................. 93

4.1 Flash Utility......................................................................................93

4.2 AMIBIOS Post Code (Aptio)............................................................94

Appendix I: Fan and Temp Sensors .....................................................101

Glossary................................................................................................... 105

Technical Support ..................................................................................111

http://www.tyan.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S5530 Motherboard

6 x SATA Single Cable

1 x IO shield

1 x S5530 Quick Installation Guide

1 x TYAN

®

Driver CD

IMPORTANT NOTE:

Sales samples may not come with any of the accessories listed above.

If you have ordered a sales sample and you are missing any of the above items,

please contact your sales representative to help order accessories.

http://www.tyan.com

5

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S5530 motherboard, based on the

Intel

®

C222 chipset. The S5530 is designed to support single Intel

®

Xeon E3-

1200 v3, i3 (22nm/Haswell)

series processor, and up to 32GB Unbuffered ECC

DDR3 1600/1333/1066 memory. Leveraging advanced technology from Intel

®

,

the S5530 is capable of offering scalable 32 and 64-bit computing, high-

bandwidth memory design, and lightning-fast PCI-E bus implementation.

The S5530 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provide the S5530 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can find

all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specification

TYAN S5530 (S5530WGM5NR-LE-2T)

Supported CPU

Series

Intel Xeon E3-1200 v3, i3 (22nm/Haswell) series

processors

Socket Type / Q'ty LGA 1150/ (1)

Processor

Thermal Design

Power (TDP)

wattage

Max up to 95W

Chipset PCH Intel C222

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed Unbuffered ECC DDR3 1600/1333/1066

Memory

Capacity Up to 32GB

Expansion Slots PCI-E (1) PCI-E Gen2 x4 slot

Recommended

Barebone /

Chassis

Mechanical

Compliant

KGT20 / KGT62A

Port Q'ty

(2) 10GbE SFP+ + (3) GbE RJ45 (1 port shared

with IPMI)

Controller Intel I210 / Broadcom BCM57810S

LAN

PHY Intel I217

http://www.tyan.com

6

Connector (2) Mini-SAS connectors (totally support 8 ports)

Controller LSI SAS2008

Speed 6.0 Gb/s

SAS

RAID RAID 0/1/1E/10 (LSI Integrated RAID)

Connector (6) SATA

Controller Intel C222

Speed (2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

USB

(2) USB3.0 ports (2 at rear)+(3) USB2.0 ports (2

via cable, Type-A)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 Total (3) GbE ports, (1) shared with IPMI

SFP+ (2) 10GbE ports

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Chipset Aspeed AST2300

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (5) 4-pin headers

Temperature Monitors temperature for CPU & memory

LED

Fan fail LED indicator / Over temperature warning

indicator

System

Monitoring

Others Watchdog timer support

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 16MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor ATX

Physical

Dimension

Board Dimension 12"x9.6" (305x243.8mm)

Operating System OS supported list Please refer to our Intel OS supported list.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

http://www.tyan.com

7

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S5530 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

1.3 Software Specifications

For the latest OS (operation system) support and IPMI Configuration Guide, please

visit our Web site for information.

http://www.tyan.com

8

NOTE

http://www.tyan.com

9

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is read this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than

7kgf/cm (6.09 lb/in) on each mounting screw for

motherboard installation.

2. Do not apply power to the board if it has been

damaged.

http://www.tyan.com

10

2.1 Board Image

S5530

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

11

2.2 Block Diagram

S5530 Block Diagram

http://www.tyan.com

12

2.3 Mainboard Mechanical Drawing

http://www.tyan.com

13

2.4 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. The

DIMM slot numbers shown above can be used as a reference when reviewing the

DIMM population guidelines shown later in the manual. For the latest board

revision, please visit our web site at http://

www.tyan.com.

http://www.tyan.com

14

Connectors, Jumpers & Slots

Connector/Jumper

1 ID LED Button (SW1) 21 SATA2.0 Connector (SATA2, J39)

2 LAN Port # 3 (LAN3) / USB 3.0 Port x 2 22 IPMB Connector (J29)

3 COM1 Port / VGA Port 23 TYAN Module Header (J35)

4 SSI 8-pin CPU Power Connector 24 Vertical Type-A USB Connector (J34)

5 LAN Port # 2 (LAN2) 25 SATA2.0 Connector (SATA4, J40)

6 Fan Connector (SYS_FAN_5, J19) 26 USB Front Panel Header (J43)

7 LAN Port # 1 (LAN1) 27 SATA SGPIO Header (HBA)

8 SFP+ Port # 1 (J12) 28 Chassis Intrusion Header (INTRD1)

9 SFP+ Port # 0 (J11) 29 SATA2.0 Connector (SATA5, J59)

10 ID LED (LED1) 30 SATA2.0 Connector (SATA3, J45)

11 SFP+ Port # 0 LED (J3, LED3) 31 Fan Connector (SYS_FAN_3, J55)

12 SFP+ Port # 1 LED (J2, LED2)

32 SATA3.0 Connector (SATA0~1,

J38/J44)

13 Reset Button (J25) 33 Fan Connector (SYS_FAN_2, J56)

14 COM2 Header (J10) 34 CPU Socket (CPU0, U46)

15 Front Panel Header (J13) 35 Fan Connector (SYS_FAN_1, J54)

16 LAN3 LED Header (J22) 36 CPU FAN Connector (J48)

17 Reserved for BB FAN Board (J23) 37 PSMI Connector (J36)

18 Power Button (J20) 38 ATX 24-pin Power Connector (J18)

19 Mini SAS Connector (SAS Port 1, J26) 39 Fan Connector (SYS_FAN_4, J20)

20 Mini SAS Connector (SAS Port 0, J27)

Jumpers Slots

a ME Firmware Update Jumper (J50) A DIMM Slots [Channel 1 / 2 / 3 / 4]

b BIOS Recovery Mode Jumper (J52) B PCIE slot (x4)

c Clear CMOS Jumper (J42)

d ME Recovery Mode Jumper (J59)

Jumper Legend

OPEN - Jumper OFF

Without jumper cover

CLOSED - Jumper ON

With jumper cover

http://www.tyan.com

15

J19

J48

J54

J56

J20

J55

J10

LED3

LED2

J43

http://www.tyan.com

16

J19/J20//J48/J54/J55/J56: 4-Pin FAN Connector

Pin 1 2 3 4

Signal GND VCC TACHOMETER PWM

Use this header to connect the cooling fan to your motherboard to keep the

system stable and reliable.

J19: SYS_FAN_5 J20: SYS_FAN_4 J48: CPU_FAN

J54: SYS_FAN_1 J55: SYS_FAN_3 J56: SYS_FAN_2

J10: COM2 Header

Signal Pin Pin Signal

DCD 1 2 DSR

RXD 3 4 RTS

TXD 5 6 CTS

DTR 7 8 NRI

GND 9 10 NONE

J3: SFP+ Port # 0 LED (LED3)

Pin 1 2

Signal VCC LED_PO_ACT_N

J2: SFP+ Port # 1 LED (LED2)

Pin 1 2

Signal VCC LED_PO_ACT_N

J43: USB Front Panel Header (blue)

Signal Pin Pin Signal

VCC 1 2 VCC

USB2_PCH_P4N_L 3 4 USB2_PCH_P5N_L

USB2_PCH_P4P_L 5 6 USB2_PCH_P5P_L

GND 7 8 GND

NONE 9 10

N/A

http://www.tyan.com

17

J23J13

J22

J29

http://www.tyan.com

18

J13: Front Panel Header

Signal Pin Pin Signal

FP_PLED+ 1 2 DSR

NONE 3 4 BMC_ID_LED+

PWR_LED- 5 6 GND

HDD_LED+ 7 8 LED_FAULT1

HDD_LED- 9 10 LED_FAULT2

FP_PWRSW# 11 12 LAN0_ACT_P

GND 13 14 LED_LAN1_ACT#

FP_RSTSW# 15 16 FP_SMBDAT

GND 17 18 FP_SMBCLK

FP_IDLEDSW# 19 20 FP_INTRUSION#

N/A 21 22 LAN1_ACT_P

FP_NMIBTN# 23 24 LED_LAN2_ACT#

J22: LAN3 LED Header

Pin 1 2

Signal VCC LAN3_LINK_ACTIVITY#

J23: Front Fan Connector (Reserved for Barebone Fan Board)

Signal Pin Pin Signal

SYS_FAN_TACH2_20P 1 2 SYS_FAN_TACH7_20P

SYS_FAN_TACH3_20P 3 4 SYS_FAN_TACH8_20P

SYS_FAN_TACH4_20P 5 6 SYS_FAN_TACH9_20P

SYS_FAN_TACH5_20P 7 8 SYS_FAN_TACH10_20P

SYS_FAN_TACH6_20P 9 10 SYS_FAN_TACH11_20P

GND 11 12 NONE

SYS_FAN4_PWM_20P 13 14 SYS_FAN_PWM3_20P

SYS_FAN_TACH12_20P 15 16 BMC_SMB_DAT3_20P

SYS_FAN_TACH13_20P 17 18 BMC_SMB_CLK3_20P

VCC 19 20 SYS_FAN_PWM5_20P

J29: IPMB Connector

Signal Pin Pin Signal

IPMB_SMB_DATA 1 2 GND

IPMB_SMB_CLK 3 4 N/A

http://www.tyan.com

19

J36

INTRD1

J35

J29

J47

SW1

LED1

http://www.tyan.com

20

J36: PSMI Connector

Pin 1 2 3 4 5

Signal

PSMI

SLK

PSMI

DATA

PSMI

ALERT

GND VCC

J47 (HBA): SATA SGPIO Header for BB HD Board

Signal Pin Pin Signal

SCL 1 2 SD1/SDO1

NONE 3 4 SDO0

SDA 5 6 SLOAD

GND 7 8 SCLOCK

VCC 9 10 HDD_FAULT

INTRD1: Chassis Intrusion Header

Pin 1 2

Open

Signal GND INTRUDER

Short (Default)

Open: Use this header to trigger the system chassis

intrusion alarm.

Short: Use this header to disable the system chassis

intrusion alarm.

J35: TYAN Module Header

Signal Pin Pin Signal

VCC3 1 2 LPC_LFRAME#

LPC_LAD0 3 4 NONE

LPC_LAD1 5 6 PLTRST_TPM#

LPC_LAD2 7 8 GND

LPC_LAD3 9 10 CLK_33M_PCH_TPM

LPC_LSIRQ0# 11 12 GND

TPM_PRSNT 13 14 VCC

N/A 15 16 N/A

LED1 / SW1: ID LED and ID LED Button

Pin Signal

+ P3V3_AUX

- ID_SW_L

State Color Description

On Blue System identified

Off Off System not identified

NOTE: The ID LED can be activated remotely using IPMI.

Please visit the TYAN Web Site at http://www.tyan.com

to download the

latest IPMI Configuration Guide for more details.

Page is loading ...

Tyan S5530 User manual

Related papers

Other documents