Chore-Time MW1001B K-Valve Inlet Operating instructions

Important: A shut-off valve MUST be in-

stalled below each pressure

gauge. Close shut-off valve

during high-pressure flushing.

K-Valve Inlet Instruction

“

Contact your nearby Chore-Time distributor or representative for additional parts and information.

Chore-Time Equipment, A Division of CTB, Inc.

P.O. Box 2000, Milford, Indiana 46542-2000 U.S.A.

Important: No more than two cage tiers per Pressure Regulator. Make sure

the Pressure Regulator is mounted high on the upper tier of the two cage tiers

that it is to regulate. For cage rows over 600 feet long use one regulator per tier.

MW1001B

April 1993