Diebold Nixdorf BA91W LCD TFT User manual

BA91W

LCD TFT Panel Display

User Manual

We would like to know your opinion on this publication.

Please send us a copy of this page if you have any constructive criticism.

We would like to thank you in advance for your comments.

With kind regards.

Diebold Nixdorf Pte Ltd

Research and Development

151 Lorong Chuan

New Tech Park #05-01A/B

Singapore 556741

Order-No.: 01750266947 D

Your Opinion:

BA91W

LCD TFT Panel Display

User Manual

Edition September 2018

All brand and product names mentioned in this document are trademarks of their respective owners.

The reproduction, transmission or use of this document or its contents is not permitted without

express authority.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Delivery subject to availability; technical modifications possible.

Contents

Introduction ................................................................................... 1

From Point-of-Sale To Point-of-Service.............................................. 1

Advantages At a Glance ..................................................................... 2

About This Manual ............................................................................. 2

LCD TFT Panel Display .................................................................... 3

BA91W ............................................................................................... 3

Operator Panel ................................................................................... 3

USB Interface ..................................................................................... 4

On Screen Display (OSD) .................................................................... 4

LED ..................................................................................................... 4

ON/OFF Button .................................................................................. 4

OSD and power button Lock/Unlock ................................................. 5

Projected Capacitive Touch Screen ................................................ 6

General Information .......................................................................... 6

Instructions for Using the Touch Screen ........................................... 6

Cleaning Instructions ......................................................................... 7

lnstalling and Securing ................................................................... 8

Unpacking And Checking the Delivery Unit ....................................... 8

lnstalling the display to a stand ......................................................... 8

Preparing the stand ........................................................................... 8

Preparing the display ......................................................................... 9

Installing the stand ........................................................................... 10

Connector panel (BA91W /pc-touch) ............................................... 11

Connector panel (BA91W /non-Touch) ........................................... 12

Connecting the display ..................................................................... 13

Ergonomic Terminal Workplace ................................................... 16

On Screen Display (OSD) .............................................................. 17

Technical Data ............................................................................. 18

Dimensions (mm) ............................................................................. 19

Projected Capacitive Touch Screen .................................................. 20

Power Consumption BA91W ........................................................... 20

Manufacturer’s Declaration And Approval ................................... 21

Supplier’s Declaration of Conformity ........................................... 25

Abbreviation Index ....................................................................... 26

BA91W User Manual

1

Introduction

From Point-of-Sale To Point-of-Service

With the BA91W you are using an ergonomically and customer-friendly

cashier's workplace.

Equipped with a sleek modern bezel free design and robust aluminum

housing, the BA91W features projected capacitive touch technology. For

the use as customer display, there is also a non-touch version available.

The BA91W features the unique Diebold Nixdorf PanelLink2™ interface.

This allows for operation of the displays via a single cable solution. In

addition, the screen also offers standard interfaces such as DVI-I and/or

USB-B. Instead of using a standard power supply with 12V DC jack, a

PoweredUSB cable can be used.

The display can be applied in all trade market segments like specialist

retailers, department stores, self-service stores, petrol stations or in

restaurants. There is indeed a great deal of scope for implementing the

display.

They can be used, for example, as:

a point-of-sale terminal

an ordering terminal

an information terminal

a desk terminal.

The low-energy and flicker-free color monitor of the BA91W is a LCD in

TFT-technology (Thin Film Transistor).

Therefore, it is well suited for multimedia applications as it offers brilliant

color representation, an excellent contrast ratio and a high display speed.

2 BA91W User Manual

Advantages At a Glance

Low footprint

Auto scaling of the screen

Flicker-free

Very good contrast ratio, adjustable sharpness, width, phase, color

temperature and brightness via OSD menu

LCD TFT technology

Digital and Analog interface

Simple installation via plug & play feature

Mounting VESA 75 standard

About This Manual

This manual informs you about everything you might need to know for the

installation (software and hardware), the operation and the maintenance

of your BA91W.

Some parts of this book require familiarity and experience in working with

operating systems and installation and configuration procedures.

Notes in the manual are marked by this symbol.

This symbol is used for warnings.

BA91W User Manual

3

LCD TFT Panel Display

BA91W

The LCD TFT panel display is an 10.1-inch flat panel display which is

absolutely flicker-free. It is designed for a resolution of max. 1280X800

pixels.

BA91W with standard cable cover

BA91W with standard cable cover type 2 (optional)

Operator Panel

4 BA91W User Manual

USB Interface

USB (type B) connector as upstream USB port for touch functionality.

On Screen Display (OSD)

Menu

Via the menu you can set the brightness, contrast and color.

Scrolling

The arrows serve for scrolling forwards or backwards in the menu items.

LED

LED off

Power off

green

Power on

orange

Power save mode

the LED lights in the standby mode

red

Out of Range

ON/OFF Button

With this button you can switch the display on or off.

Menu

Scrolling

forwards

and

backwards

Status

LED

ON/OFF

Button

BA91W User Manual

5

OSD and power button Lock/Unlock

There are two possible methods:

- Hardware method

When there is no active OSD Menu, press-and-hold Menu button for more

than 5 seconds to lock/unlock the OSD function.

The power button can be lock/unlock through the OSD Menu.

- Software method

Using „DDC control“ utility provided by Diebold Nixdorf, OSD function and

power button can be lock/unlock remotely through the software

command.

6 BA91W User Manual

Projected Capacitive Touch Screen

General Information

The use of projected-capacitive touch screens has all the benefits a normal

capacitive touch screen has:

fast processing of touch information

high sensitivity (use with hands, conductive pencils and also with thin

gloves)

high resolution

improved legibility and display brightness due to optimal light

transmission

In addition the technology of projected-capacitive touch screens is

characterized by significant higher robustness and stability. As most of the

surface contaminations do not cause an interference of the touch screen,

this technology can be used in public or under severe environmental

conditions.

Instructions for Using the Touch Screen

The touch screen responds to the lightest touches. The touch with only one

finger is like the use of the left mouse button. The use of the touch screen

with two fingers generates a zoom if the fingers are brought together or

pulled apart. With a circular motion of the fingers the element on the

display can be rotated. This function must be supported by either the

operating system or by the application.

BA91W User Manual

7

Cleaning Instructions

Always turn off the system before cleaning

The glass surface of your Touch Screen should be cleaned with a

mild, abrasive free, commercially available glass cleaning product.

All pH neutral materials (pH 6 to 8) are good for cleaning.

Cleaners with pH values 9 to 10 are not recommended. Cleaning

with water and isopropyl alcohol is possible as well. Do not use sol

vents containing acetic acid. Use a soft, fine-meshed cloth to clean

the surface. Dampen the cloth slightly and then clean the screen.

A wrong maintenance may cause damages to the screen, which

are not covered by guarantee or warranty.

8 BA91W User Manual

lnstalling and Securing

Unpacking And Checking the Delivery Unit

Unpack the parts and check to see whether the delivery matches the

information on the delivery note. The delivery comprises the

respective screen module. Data cables, necessary for operation, can

be ordered separately. lf damage has occurred during shipping or if

the package contents do not match the delivery note, immediately

inform your Diebold Nixdorf sales outlet.

Transport the device only in its original packaging (to protect it

against impact and shock).

lnstalling the display to a stand

Take the stand and the monitor out of the packaging. For installation you

will need a Torx screwdriver to loosen and tighten the screws!

Preparing the stand

From the stand:

1. Remove the VESA

cover.

BA91W User Manual

9

Preparing the display

1. Place a piece of protection

sheet on a flat surface e.g.

a table.

2. Lay the display face down

on the protection sheet.

3. Tighten the two screws

half way through.

4. Remove the cable cover at

the bottom of the display.

5. Plug in cable and fasten

the two screw to fix cable

with the display.

6. Place back the cable cover

at the bottom of the

display.

7. Pull the cable through the

opening of the cable

cover.

1

2

3

4

10 BA91W User Manual

Installing the stand

1. Bring the display to above

the stand.

2. Place the screws (that were

previously tightened

halfway through) to the two

U-shaped groove on the

frame of the stand.

3. Tighten the two screws to

secure the display to the

stand.

BA91W User Manual

11

4. Place in the VESA cover.

When uninstalling the stand always make sure that all cables are

disconnected.

Connector panel (BA91W /pc-touch)

The following sockets are located under the bezel of the display:

Power Jack

Power input for the screen via external power

supply (12V)

DC-Power Jack

（12V）

USB-B

DVI-I / PLINK2™

12 BA91W User Manual

USB-B

USB connection to the PC system

DVI-I / PLINK2™

DVI-I / PLINK2™ for video/data transfer between the

system and the TFT display

If the power is not supplied by a BEETLE system, through a PoweredUSB or

PLink2™, you have to use an external power supply unit.

Only UL Listed LPS (Limited Power Source) power supplies can be

used.

By connecting the system's cable the screen will be switched on.

Connector panel (BA91W /non-Touch)

The following sockets are located under the bezel of the display:

Power Jack

Power input for the screen via external power

supply (12V)

DVI-I / PLINK2™

DVI-I / PLINK2™ for video/data transfer between the

system and the TFT display

DC-Power Jack

（12V）

DVI-I / PLINK2™

BA91W User Manual

13

If the power is not supplied by a BEETLE system, by a PoweredUSB or

PLink2™, you have to use an external power supply unit.

Only UL Listed LPS (Limited Power Source) power supplies can be

used.

By connecting the system's cable the screen will be switched on.

Connecting the display

Before connecting cables switch off the system and disconnect it

from the main supply.

For display on mounted on a stand

1. Push down the cable cover

to release it and slide the

cover out of the guide.

The connector panel is now

accessible.

14 BA91W User Manual

2. Move the DVI cable, power

cable and USB cable through

the holder and plug the

connector into the jack. Fix

the connector by rotating

clockwise the knurled

screws.

Lay the necessary cables

inside for example USB A

cable and connect the plug.

Make sure that cables are not secured by a lock, are loosely

inserted into the strain relief.

Page is loading ...

Diebold Nixdorf BA91W LCD TFT User manual

This manual is also suitable for

Diebold Nixdorf BA91W LCD TFT User manual

Related papers

Other documents