2. Haworth
  3. 7029-9918a

Haworth 7029-9918a Operating instructions

  • Hello, I'm here to help you with the Seismic Bracket installation. I've reviewed the provided installation instructions document, which details the tools and steps required to install the Seismic Bracket, including the use of specific anchors and compliance with OSHPD OPM-0232-13. Feel free to ask me any specific questions about the process or required materials.
  • What tools are required for installation?
    What type of bolts are used?
    What type of expansion anchors are used?
3/8-16 x 5" Hex Head Bolt - Grade 8
(D)
3/8" Hex Nut - Grade 8
(A)
Tools Required
Part No: Rev:
Page:
E.C.O. No: 1 OF 2 7029-9918
CUSTOMER SERVICE PHONE: 1-800-426-8562
360-429 A
Seismic Bracket
COMPOSE®
Installation Instructions
A
C
D
Seismic Bracket
B
9/16"3/8" Drill
9/16"
1 2
F
E
F
3/8" Flat Washer - Grade 8
(C)
A
C
D
B
Determine which panels (F) will require
the seismic bracket (B) based on layout
and application per OSHPD OPM-0232-13
B
F
Part No: Rev:
Page:
E.C.O. No: 2 OF 2 7029-9918
CUSTOMER SERVICE PHONE: 1-800-426-8562
360-429 A
F
F
B
3
6
B
(G)
3/8” Expansion Anchor - Grade 8
5Using seismic bracket (B) as a template, drill holes
following instructions supplied by anchor’s
manufacturer and those noted in OPM-0232-13.
Install expansion anchors (G)
7Repeat the procedure for each location as
noted on OSHPD OPM-0232-13
4Use Carbon steel HILTI KB-TZ Expansion
Anchors complying with ICC ESR-1917
Reissued May 2015
Use the seismic bracket (B) to level panel (F)
G
/