Boston Whaler 160 Super Sport Bench Seat Cushions Installation guide

Type
Installation guide

This manual is also suitable for

ACCESSORY INSTALL
INSTRUCTIONS
TION
Page
1
of
3
BENCH SEAT CUSHION
Installation Instructions for the 130 & 160 SUPER SPORT
Issue Date
06/15/2018
Rev:C
PROCEDURE NO. AI-MS-001
1.
PURPOSE
Provide step-by-step procedure for the bench seat
cushion installation.
2.
SCOPE
This procedure is limited to the bench seat cushion installation on the
130 & 160 Super Sport.
3.
DEFINITION
3.1.
Not Applicable
4.
RESPONSIBILITY
4.1.
Not Applicable
5.
TOOLS/EQUIPMENT REQUIRED
5.1.
Drill
-
Phillips head bit #2
-
1/8” drill bit w/countersink
5.2.
Pencil
5.4. Hardware Kit (supplied)
CONTENTS OF KIT PART #
BENCH SEAT CUSHIONS.............................2316016
HARDWARE PKG............... 901BWBENCHCUSHION
6.
SAFETY
6.1.
Safety glasses or goggles are recommended.
7.
FORMS
7.1.
Not applicable
ACCESSORY INSTALL
INSTRUCTIONS
TION
BENCH SEAT CUSHION
Installation Instructions for the 130 & 160 Super Sport
PROCEDURE NO. AI-MS-001
ACCESSORY INSTALL
INSTRUCTIONS
TION
Page
2
of
3
BENCH SEAT CUSHION
Installation Instructions for the 130 & 160 SUPER SPORT
Issue Date
06/15/2018
Rev:C
PROCEDURE NO. AI-MS-001
8.
PROCEDURE
8.1.
Center the cushions on the bench between the
outside edges of the bench and the cup holders.
8.2.
Wrap the canvas flaps under the bench.
8.2.1. Using the pencil, make a mark at the point
where the snaps contact the underside of
the bench.
NOTE: There are three places forward and
three places aft that should be
marked.
8.3.
Using the drill with 1/8” drill bit, drill the bench at the
marks made in the previous step.
NOTE: Drill only deeply enough to penetrate the
fiberglass layer. DO NOT drill into or
through the core material.
ACCESSORY INSTALL
INSTRUCTIONS
TION
Page
3
of
3
BENCH SEAT CUSHION
Installation Instructions for the 130 & 160 SUPER SPORT
Issue Date
06/15/2018
Rev:C
PROCEDURE NO. AI-MS-001
8.4.
Using the hardware supplied and the Phillips head bit,
install a snap at each of the drilled holes made in the
previous step.
8.5.
Secure the cushions by attaching the canvas flaps to
the snaps installed in the previous step.
Bench Seat Cushions Installation Is Complete
ACCESSORY INSTALL
INSTRUCTIONS
TION
Page
BENCH SEAT CUSHION
Installation Instructions for the 130 & 160 Super Sport
PROCEDURE NO. AI-MS-001
  • Page 1 1
  • Page 2 2
  • Page 3 3

Boston Whaler 160 Super Sport Bench Seat Cushions Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI