Boston Whaler 170 Super Sport Bow Cushions Installation guide

Type
Installation guide

This manual is also suitable for

Boston Whaler 170 Super Sport Bow Cushions

These bow cushions give your boat a stylish upgrade while providing a comfortable place to relax. Their custom fit ensures a snug fit and their durable construction is made to withstand the elements. The cushions are easy to install, with just a few simple steps: mark the location of the snaps, drill and countersink the holes, apply silicone, insert the snap receivers, and attach the cushion. Enjoy the comfort and style of these bow cushions on your next boating adventure!

Boston Whaler 170 Super Sport Bow Cushions

These bow cushions give your boat a stylish upgrade while providing a comfortable place to relax. Their custom fit ensures a snug fit and their durable construction is made to withstand the elements. The cushions are easy to install, with just a few simple steps: mark the location of the snaps, drill and countersink the holes, apply silicone, insert the snap receivers, and attach the cushion. Enjoy the comfort and style of these bow cushions on your next boating adventure!

ACCESSORY INSTALLATION
INSTRUCTIONS
BOW CUSHION
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/10/2010
Rev:B
PROCEDURE NO.
AI-MS-004
1. PURPOSE
Provide step-by-step procedure for the bow cushion
installation.
2. SCOPE
This procedure is limited to the bow cushion installation on the 130, 150 & 170 Super Sport.
3. DEFINITION
3.1. Not Applicable
4. RESPONSIBILITY
4.1. Not Applicable
5. TOOLS/EQUIPMENT REQUIRED
5.1. Drill
- Phillips head bit#2
- 1/8” drill bit w/countersink
5.2. Silicone
5.3. Pencil
5.4. Hardware Kit (supplied)
6. SAFETY
6.1. Safety glasses or goggles are recommended.
7. FORMS
7.1. Not Applicable
CONTENTS OF KIT PART #
130SS CUSHION...........................................1947654
150SS CUSHION...........................................1947657
170SS CUSHION...........................................1981333
HARDWARE PKG..................901BWBOWCUSHION
Page 1 of 3
ACCESSORY INSTALLATION
INSTRUCTIONS
BOW CUSHION
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/10/2010
Rev:B
PROCEDURE NO.
AI-MS-004
8. PROCEDURE
8.1. Lay the cushion in place.
8.2. Starting on the corner of the cushion, and using the pencil,
make a mark on the deck just under each snap on the
underside perimeter of the cushion.
8.3. Remove the cushion and using the 1/8” drill bit
w/countersink, drill and slightly countersink at each mark
Made in previous step.
8.4. Apply silicone to each of the holes drilled in the previous step.
8.5. Using the drill with Phillips head bit, insert a snap receiver into
each of the holes drilled in the previous step.
Page 2 of 3
ACCESSORY INSTALLATION
INSTRUCTIONS
BOW CUSHION
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/10/2010
Rev:B
PROCEDURE NO.
AI-MS-004
8.6. Secure the cushion to the bow lifting eye using the strap on
the underside of the cushion.
8.7. Attach cushion to each snap around the perimeter of the
cushion.
Bow Cushion Installation Is Complete
Page 3 of 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

Boston Whaler 170 Super Sport Bow Cushions Installation guide

Type
Installation guide
This manual is also suitable for

Boston Whaler 170 Super Sport Bow Cushions

These bow cushions give your boat a stylish upgrade while providing a comfortable place to relax. Their custom fit ensures a snug fit and their durable construction is made to withstand the elements. The cushions are easy to install, with just a few simple steps: mark the location of the snaps, drill and countersink the holes, apply silicone, insert the snap receivers, and attach the cushion. Enjoy the comfort and style of these bow cushions on your next boating adventure!

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI