WAGO End module User manual

Brand: WAGO

Model: End module

Type: User manual

Pos: 2 /Dokumentation allgemein/Einband/Einband Handbuch - Fronts eite 20 15 - mit Doc Var iabl en ( Sta ndar d) @ 9\ mod_1285229289866_0.docx @ 64941 @ @ 1

WAGO-I/O-SYSTEM 750

Manual

750-600(/xxx-xxx)

End Module

Internal Bus Termination

Version 1.3.0

Pos: 3 /Al le S eri en ( Allg em ein e Mod ul e)/H in weise z ur Do ku ment ati on/I mpr essu m für St a ndard han dbüc h er - all g. Ang aben, Ansc hrifte n, Telef onnu mmer n und E-Mail -Adr esse n @ 3\mod_1219151118203_21.docx @ 21060 @ @ 1

2 WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax: +49 (0) 571/8 87 – 1 69

E-Mail: [email protected]

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 5 55

Fax: +49 (0) 571/8 87 – 85 55

E-Mail: [email protected]

Every conceivable measure has been taken to ensure the accuracy and

completeness of this documentation. However, as errors can never be fully

excluded, we always appreciate any information or suggestions for improving the

documentation.

E-Mail: [email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally protected by trademark or patent.

=== Ende der Lis te f ür T e xtmar ke Ei nb and _vor ne = ==

WAGO-I/O-SYSTEM 750 Table of Contents 3

750-600 End Module

Manual

Version 1.3.0

Pos: 5 /D ok ument ati on al lg em ein/V erz eic hni sse /Inh alts ver zei chni s - Ü bersc hrift oG und Ver zeich nis @ 3\mod_1219151230875_21.docx @ 21063 @ @ 1

Table of Contents

1 Notes about this Documentation ................................................................. 5

1.1 Validity of this Documentation ................................................................. 5

1.2 Copyright ................................................................................................... 5

1.3 Symbols ..................................................................................................... 6

1.4 Number Notation ....................................................................................... 8

1.5 Font Conventions ...................................................................................... 8

2 Important Notes ........................................................................................... 9

2.1 Legal Bases ............................................................................................... 9

2.1.1 Subject to Changes ............................................................................... 9

2.1.2 Personnel Qualifications ....................................................................... 9

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying

Provisions ............................................................................................. 9

2.1.4 Technical Condition of Specified Devices ......................................... 10

2.2 Safety Advice (Precautions) .................................................................... 11

3 Device Description ..................................................................................... 13

3.1 View ........................................................................................................ 13

3.2 Connectors ............................................................................................... 14

3.2.1 Data Contacts/Internal Bus ................................................................. 14

3.2.2 Power Jumper Contacts/Field Supply ................................................ 14

3.2.3 CAGE CLAMP

Connectors ............................................................. 14

3.3 Display Elements .................................................................................... 15

3.4 Operating Elements ................................................................................. 15

3.5 Technical Data ........................................................................................ 16

3.5.1 Device ................................................................................................. 16

3.5.2 Connection Type ................................................................................ 16

3.5.3 Climatic Environmental Conditions ................................................... 16

3.6 Approvals ................................................................................................ 17

3.7 Standards and Guidelines ........................................................................ 19

4 Mounting ..................................................................................................... 20

4.1 Mounting Sequence ................................................................................. 20

4.2 Inserting and Removing Devices ............................................................ 21

4.2.1 Inserting the I/O Module .................................................................... 21

4.2.2 Removing the I/O Module .................................................................. 22

5 Use in Hazardous Environments .............................................................. 23

5.1 Marking Configuration Examples ........................................................... 24

5.1.1 Marking for Europe According to ATEX and IEC-Ex ...................... 24

5.1.2 Marking for America According to NEC 500 .................................... 29

5.2 Installation Regulations ........................................................................... 30

5.2.1 Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX

554086 X) ........................................................................................... 31

5.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX

106032 X) ........................................................................................... 32

5.2.3 Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X)33

5.2.4 Special Conditions for Safe Use (IEC-Ex Certificate IECEx TUN

12.0039 X) .......................................................................................... 34

4 Table of Contents WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

5.2.5 Special Conditions for Safe Use According to ANSI/ISA 12.12.01 .. 35

List of Figures ...................................................................................................... 36

List of Tables ........................................................................................................ 37

=== Ende der Lis te f ür T e xtmar ke V erz eic hnis _vor ne == =

WAGO-I/O-SYSTEM 750 Notes about this Documentation 5

750-600 End Module

Manual

Version 1.3.0

Pos: 7 /Al le S eri en ( Allg em ein e Mod ul e)/Ü ber sc hrift en f ür al l e Ser ien/ Hi nweis e zur D o kume ntati on /Hi nwei se z u dies er D oku me ntati on - Ü ber schr if t 1 @ 4\ mod_1237987661750_21.docx @ 29029 @ 1 @ 1

1 Notes about this Documentation

Pos: 8 /A lle Ser ien ( All ge mein e M odul e)/ Hin weis e z ur D oku men tati on/H i nweis e/Hi n weis : D okum ent atio n a ufbe wahr e n @ 4 \mod_1237987339812_21.docx @ 29026 @ @ 1

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation

during the entire service life of the product. Pass on the documentation to any

subsequent user. In addition, ensure that any supplement to this documentation is

included, if necessary.

Pos: 9 /A lle Ser ien ( All ge mein e M odul e)/ Über sc hrif ten für all e Ser ie n/Hi nwei se zur D o kume nt ation /G ültig keit sb ereic h - Ü ber schri ft 2 @ 12\mod_1338912448776_21.docx @ 96469 @ 2 @ 1

1.1 Validity of this Documentation

Pos: 10 /S eri e 7 50 ( WA GO-I/ O-SYST EM) /Hi n weis e zur D okum ent ati on/G ülti gkei ts berei c hGült ig keit sber eic h D oku ment ati on B uskl e mme 7 50-x xxx, St and ard versi on und aufg el iste te V ari ant en @ 1 4\mod_1358944038682_21.docx @ 109354 @ @ 1

This documentation is only applicable to the I/O module 750-600 (End Module)

and the variants listed in the table below.

Pos: 11 /S eri e 7 50 ( WA GO-I/ O-SYST EM) /Hi n weis e zur D okum ent ati on/G ülti gkei ts berei c h/Var iant e nlist en/ Var iant enli st e - 7 50-xxx - Standardversion und Variante /025-000 (er w eitert er T e mper at urber eic h) @ 9\mod_1281521920414_21.docx @ 63093 @ @ 1

Table 1: Variants

Item Number/Variant

Designation

750-600

End Module

750-600/025-000

End Module/T

Pos: 12 /A ll e Ser ien (Al lg emei ne M od ule)/ Hi nweis e zur D o kume ntati on /Hi nwei se/ Hin weis : G ülti g keit d er Anga ben für aufg el iste te V ari ant en @ 9\mod_1281520778141_21.docx @ 63085 @ @ 1

Documentation Validity for Variants

Unless otherwise indicated, the information given in this documentation applies to

listed variants.

Pos: 13 /S eri e 7 50 ( WA GO-I/ O-SYST EM) /Hi n weis e zur D okum ent ati on/Hi nw eise /Ac htu ng: H in weis zur D oku ment ati on B uskl e mmen 750- xxxx @ 4\mod_1237986979656_21.docx @ 29023 @ @ 1

The I/O module 750-600 shall only be installed and operated according to the

instructions in this manual and in the manual for the used fieldbus

coupler/controller.

Consider power layout of the WAGO-I/O-SYSTEM 750!

In addition to these operating instructions, you will also need the manual for the

used fieldbus coupler/controller, which can be downloaded at www.wago.com.

There, you can obtain important information including information on electrical

isolation, system power and supply specifications.

Pos: 14.1 /All e Seri en ( All ge meine Mo dul e)/H in weis e zur D oku ment ati on/U rh eber sc hutz aus führ lic h @ 4\mod_1235565145234_21.docx @ 27691 @ 2 @ 1

1.2 Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Pos: 14.2 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

6 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Pos: 14.3 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Hi nwei se z ur Dok um enta tio n/S ymbol e - Ü bers chr ift 2 @ 1 3\mod_1351068042408_21.docx @ 105270 @ 2 @ 1

1.3 Symbols

Pos: 14 .4.1 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Gefahr/Gefahr: _Warnung vor Personenschäden allgemein_ - Erl äuter ung @ 13\ mod_1343309450020_21.docx @ 101029 @ @ 1

Personal Injury!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 14 .4.2 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonsti ge Hinw eise/ Gefa hr/Gef ahr: _ Warnu ng vor Per son enschä den durc h elek trisc hen Str om_ - Erläuterung @ 13\mod_1343309694914_21.docx @ 101030 @ @ 1

Personal Injury Caused by Electric Current!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 14 .4.3 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so nsti ge H inw eis e/W arn ung/ War nung : _ War nu ng vor P erso nens ch äde n all ge mei n_ - Erläuterung @ 13\mod_1343309877041_21.docx @ 101035 @ @ 1

Personal Injury!

Indicates a moderate-risk, potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Pos: 14 .4.4 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so nsti ge H inw eis e/V orsic ht /Vor sic ht: _War nu ng vor P ers one nsc häde n al lg emei n_ - Erläuterung @ 13\mod_1343310028762_21.docx @ 101038 @ @ 1

Personal Injury!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Pos: 14 .4.5 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Achtung/Achtung: _Warnung vor Sachschäden allg em ein_ - Erläuterung @ 13\mod_1343310134623_21.docx @ 101041 @ @ 1

Damage to Property!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 14.4 .6 /All e Serien ( Allg emeine Modul e)/Wic htig e Erläut erung en/Si cherh eits- und sonstige Hinweise/Achtung/Achtung: _Warnung vor Sachschäden durch elektrostatische Aufladung_ - Erläuterung @ 13\mod_1343310227702_21.docx @ 101044 @ @ 1

Damage to Property Caused by Electrostatic Discharge (ESD)!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 14 .4.7 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Hinweis/Hinweis: _Wichtiger Hinweis allgemein_ - Erläuterung @ 13\mod_1343310326906_21.docx @ 101047 @ @ 1

Important Note!

Indicates a potential malfunction which, if not avoided, however, will not result in

damage to property.

Pos: 14 .4.8 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so nsti ge H inw eis e/I nfor mat ion/ Inf or matio n: _W eiter e Inf or mati on allg emei n_ - Erl äuter ung @ 13 \mod_1343310439814_21.docx @ 101051 @ @ 1

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7

750-600 End Module

Manual

Version 1.3.0

Additional Information:

Refers to additional information which is not an integral part of this

documentation (e.g., the Internet).

Pos: 14.5 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Pos: 14 .6 /All e Seri en (Allg emeine Modul e)/Hi nweis e zur Do kument ation /Dars tellu ng der Za hlens yste me - Über schr ift 2 und I nhal t @ 3\mod_1221059454015_21.docx @ 21711 @ 2 @ 1

1.4 Number Notation

Table 2: Number Notation

Number Code

Example

Note

Decimal

100

Normal notation

Hexadecimal

0x64

C notation

Binary

'100'

'0110.0100'

In quotation marks, nibble separated with

dots (.)

Pos: 14.7 /All e Seri en ( All ge meine Mo dul e)/H in weis e zur D oku ment ati on/S chr ift kon venti o nen - Ü bers chr ift 2 u nd I nhal t @ 3\mod_1221059521437_21.docx @ 21714 @ 2 @ 1

1.5 Font Conventions

Table 3: Font Conventions

Font Type

Indicates

italic

Names of paths and data files are marked in italic-type.

e.g.: C:\Program Files\WAGO Software

Menu items are marked in bold letters.

e.g.: Save

A greater-than sign between two names means the selection of a

menu item from a menu.

e.g.: File > New

Input

Designation of input or optional fields are marked in bold letters,

e.g.: Start of measurement range

“Value”

Input or selective values are marked in inverted commas.

e.g.: Enter the value “4 mA” under Start of measurement range.

[Button]

Pushbuttons in dialog boxes are marked with bold letters in square

brackets.

e.g.: [Input]

[Key]

Keys are marked with bold letters in square brackets.

e.g.: [F5]

Pos: 15 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 9

750-600 End Module

Manual

Version 1.3.0

Pos: 16 /A ll e Ser ien (Al lg emei ne M od ule)/ Üb ers chrif te n für al le S erien/Wichtige Erläuterungen/Wichtige Erläuterungen - Übersc hrift 1 @ 4\mod_1241428899156_21.docx @ 32170 @ 1 @ 1

2 Important Notes

Pos: 17.1 /All e Seri en ( All ge meine Do kum ente) ( All ge meine Mo dule) /Wi cht ige Erl äut eru nge n/Wi chti ge Erl äut eru nge n - Ei nleit ung @ 3\mod_1221059818031_21.docx @ 21717 @ @ 1

This section includes an overall summary of the most important safety

requirements and notes that are mentioned in each individual section. To protect

your health and prevent damage to devices as well, it is imperative to read and

carefully follow the safety guidelines.

Pos: 17.2 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Wi chti ge Erl äuter u ngenR ec htlic he Gr undl ag en - Üb ersc hrift 2 @ 3\ mod_1221060626343_21.docx @ 21726 @ 2 @ 1

2.1 Legal Bases

Pos: 17.3 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Wichtige Erläuterungen/Änderungsvorbehalt - Übersc hrif t 3 un d In halt @ 3\ mod_1221060036484_21.docx @ 21720 @ 3 @ 1

2.1.1 Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any

alterations or modifications that serve to increase the efficiency of technical

progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from

the granting of patents or from the legal protection of utility patents. Third-party

products are always mentioned without any reference to patent rights. Thus, the

existence of such rights cannot be excluded.

Pos: 17.4 /Serie 750 (WAGO-I/O-SYST EM)/ Wic htige Erl äuter unge n/Pers onalq uali fikati onPer sonal qual ifika tion 750- xxxx - Ü bersc hrift 3 u nd Inhal t @ 3\mod_1224061208046_21.docx @ 24063 @ 3 @ 1

2.1.2 Personnel Qualifications

All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be

carried out by electrical specialists with sufficient knowledge in automation. The

specialists must be familiar with the current norms and guidelines for the devices

and automated environments.

All changes to the coupler or controller should always be carried out by qualified

personnel with sufficient skills in PLC programming.

Pos: 17.5 /Serie 750 (WAGO-I/O-SYST EM)/Wichtige Erläuterungen/Bestimmungsgemäße VerwendungBestimmungsgemäße Verwendung 750-xxxx - Üb erschr if t 3 und I nhal t @ 3 \mod_1224064151234_21.docx @ 24070 @ 3 @ 1

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with

Underlying Provisions

Fieldbus couplers, fieldbus controllers and I/O modules found in the modular

WAGO-I/O-SYSTEM 750 receive digital and analog signals from sensors and

transmit them to actuators or higher-level control systems. Using programmable

controllers, the signals can also be (pre-) processed.

The devices have been developed for use in an environment that meets the IP20

protection class criteria. Protection against finger injury and solid impurities up to

12.5 mm diameter is assured; protection against water damage is not ensured.

Unless otherwise specified, operation of the devices in wet and dusty

environments is prohibited.

Operating the WAGO-I/O-SYSTEM 750 devices in home applications without

further measures is only permitted if they meet the emission limits (emissions of

interference) according to EN 61000-6-3. You will find the relevant information

in the section “Device Description” > “Standards and Guidelines” in the manual

for the used fieldbus coupler/controller.

10 Important Notes WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O-

SYSTEM 750 in hazardous environments. Please note that a prototype test

certificate must be obtained that confirms the correct installation of the system in

a housing or switch cabinet.

Pos: 17.6 /All e Seri en ( All ge meine Do kum ente) ( All ge meine Mo dule) /Wi cht ige Erl äut eru nge n/T echni sc her Zus tan d d er G erä te - Ü bersc hrift 3 un d Inhal t @ 3\mod_1221060446109_21.docx @ 21723 @ 3 @ 1

2.1.4 Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software

configurations, which meet the individual application requirements. WAGO

Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of

changes in hardware or software as well as to non-compliant usage of devices.

Please send your request for modified and new hardware or software

configurations directly to WAGO Kontakttechnik GmbH & Co. KG.

Pos: 17.7 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 11

750-600 End Module

Manual

Version 1.3.0

Pos: 17 .8 /All e Seri en (Allg emeine Modul e)/Ü berschr ifte n für alle S erie n/Wich tige Er läuter ung enSic herhei tshi nweis e - Übers chrif t 2 @ 6\mod_1260180299987_21.docx @ 46724 @ 2 @ 1

2.2 Safety Advice (Precautions)

Pos: 17.9 /All e Seri en ( All ge meine Do kum ente) ( All ge meine Mo dule) /Wi cht ige Erl äut eru nge n/Si cher hei ts hin weis e/Ei nl eitu ng Sich erh eits hin weis e H ard ware @ 6\mod_1260180170493_21.docx @ 46720 @ @ 1

For installing and operating purposes of the relevant device to your system the

following safety precautions shall be observed:

Pos: 17.1 0. 1 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /G efahr /G efahr : N ich t an G erät en unter Sp ann ung arbei te n! @ 6\ mod_1260180365327_21.docx @ 46727 @ @ 1

Do not work on devices while energized!

All power sources to the device shall be switched off prior to performing any

installation, repair or maintenance work.

Pos: 17.1 0. 2 /S erie 750 ( W AGO -I/O-SY ST EM) /Wic htig e Er l äuter ung en /Sic her hei ts- un d s onsti ge H in wei se/G ef ahr/ Gefa hr: Ei nbau 07 50- xxxx nur in Geh äusen, S chrä nken oder ele ktrisc hen Betr iebsr äume n! @ 6\mod_1260180556692_21.docx @ 46731 @ @ 1

Install the device only in appropriate housings, cabinets or in electrical

operation rooms!

The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,

install the system and its components exclusively in appropriate housings,

cabinets or in electrical operation rooms. Allow access to such equipment and

fixtures to authorized, qualified staff only by means of specific keys or tools.

Pos: 17.1 0. 3 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /G efahr /G efahr : U nfal l verh ütung sv orsc hri ft en b each ten! @ 6\mod_1260180657000_21.docx @ 46735 @ @ 1

Pos: 17 .10. 4 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /G efahr /G efahr : A uf normg er echt e n Ansc hlu ss ac hten! @ 6 \mod_1260180753479_21.docx @ 46739 @ @ 1

Pos: 17.1 1. 1 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lge meine M odul e)/Wic htig e Erläuter ung en/Sic herh eits hinwei se/Ac htung /Acht ung: De fekt e oder besc hädig te Ger äte aus tausc hen! @ 6\mod_1260180857358_21.docx @ 46743 @ @ 1

Replace defective or damaged devices!

Replace defective or damaged device/module (e.g., in the event of deformed

contacts), since the long-term functionality of device/module involved can no

longer be ensured.

Pos: 17.1 1. 2 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /Ac htu ng/A cht ung : G erät e vor kri echen den und is olier end en Stoff en schüt zen! @ 6\mod_1260181036216_21.docx @ 46747 @ @ 1

Protect the components against materials having seeping and insulating

properties!

The components are not resistant to materials having seeping and insulating

properties such as: aerosols, silicones and triglycerides (found in some hand

creams). If you cannot exclude that such materials will appear in the component

environment, then install the components in an enclosure being resistant to the

above-mentioned materials. Clean tools and materials are imperative for handling

devices/modules.

Pos: 17.1 1. 3 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /Ac htu ng/A cht ung : Rei nig ung nur mi t zul äss ig en M at erial ien! @ 6\mod_1260181203293_21.docx @ 46751 @ @ 1

Clean only with permitted materials!

Clean soiled contacts using oil-free compressed air or with ethyl alcohol and

leather cloths.

Pos: 17.1 1. 4 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /Ac htu ng/A cht ung : K ein K ont a ktspra y verw end en! @ 6\ mod_1260181290808_21.docx @ 46755 @ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in

connection with contamination.

Pos: 17.1 1. 5 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /Ac htu ng/A cht ung : V erpol ung ver mei de n! @ 6\mod_1260184045744_21.docx @ 46767 @ @ 1

Do not reverse the polarity of connection lines!

Avoid reverse polarity of data and power supply lines, as this may damage the

devices involved.

Pos: 17.1 1. 6 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/ Wich tig e Erl äuter u ngen /Sic h erhei ts hinw eise /Ac htu ng/A cht ung : El ektros tatisc he Entl adu ng verm eiden! @ 6\mod_1260181364729_21.docx @ 46759 @ @ 1

Avoid electrostatic discharge!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge when touched. Please observe the safety precautions

against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the

devices, please ensure that environmental factors (personnel, work space and

packaging) are properly grounded.

Pos: 18 /D o kume nt ation all ge mein/ Glie der ungs ele mente /---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 13

750-600 End Module

Manual

Version 1.3.0

Pos: 19 /A ll e Ser ien (Al lg emei ne M od ule)/ Üb ers chrif te n für al le S eri en/G erä teb esc hrei bu ng/G erä tebe schr eib ung - Üb ersc hrift 1 @ 3\ mod_1233756084656_21.docx @ 27096 @ 1 @ 1

3 Device Description

Pos: 20.1 .1 /Ser ie 7 50 ( WAG O-I/ O-SYSTEM)/Gerätebeschreibung/Einleitung/Anwendung/SY/Anwendung 750-0600 @ 5\ mod_1247558602810_21.docx @ 37354 @ @ 1

The module 750-600 (End Module)is used to terminate the internal bus of a

fieldbus node. This module completes the internal data circuit and ensures correct

data flow.

Pos: 20.1 .2 /Ser ie 7 50 ( WAG O-I/ O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sonstige Hinweise/H inwei s/Hi nweis : Busabs chlus s nich t verg essen! @ 6\mod_1256194225557_21.docx @ 43432 @ @ 1

Don't forget the bus end module!

Always plug a bus end module 750-600 onto the end of the fieldbus node! You

must always use a bus end module at all fieldbus nodes with WAGO-I/O-

SYSTEM 750 fieldbus couplers/controllers to guarantee proper data transfer.

Pos: 20.2 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Ger äte bes chr eib ung /Ans ic ht - Ü ber schri ft 2 @ 4\mod_1240984217343_21.docx @ 31958 @ 2 @ 1

3.1 View

Pos: 20.3 /Serie 750 (WAGO-I/O-SYST EM)/ Ger ätebesc hrei bung/A nsic ht/S ystem klemme n/A nsicht 75 0-0600 @ 4\mod_1236330521156_21.docx @ 28083 @ @ 1

Figure 1: View

Table 4: Legend for Figure “View”

Pos.

Description

Details see section

Marking possibility with

Mini-WSB

---

2 Release tab

“Mounting” > “Inserting and Removing

Devices”

Data contacts

“Device Description” > “Connectors”

Pos: 20.4 /Dokumentation all ge mein/ Glie der ungs ele mente /---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

14 Device Description WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Pos: 20.5 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Ger äte bes chr eib ung /Ans chl üss e - Üb ersc hrift 2 @ 4\ mod_1240984262656_21.docx @ 31961 @ 2 @ 1

3.2 Connectors

Pos: 20.6 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bu ng/A nsc hlüss e/D ate nkon takt e/Kl em menbus - Ü bersc hrift 3 @ 6\ mod_1256294684083_21.docx @ 43660 @ 3 @ 1

3.2.1 Data Contacts/Internal Bus

Pos: 20 .7.1 /S erie 750 (WAGO-I/ O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Datenkontakte - Feld bus kop pler/-c on troll er , Ab bil dung u nd B esc hrei bung @ 3\ mod_1231771259187_21.docx @ 26002 @ @ 1

Communication between the fieldbus coupler/controller and the I/O modules as

well as the system supply of the I/O modules is carried out via the internal bus. It

is comprised of 6 data contacts, which are available as self-cleaning gold spring

contacts.

Figure 2: Data Contacts

Pos: 20.7 .2 /Ser ie 7 50 ( WAG O-I/ O-SYST EM) /Wich tige Erlä uter ung en/Si ch erh eits- und sons tige Hi nwei s e/Ach tu ng/A cht ung : Bus kle mm en ni cht auf Gol df eder kon tak te l eg en! @ 7\mod_1266318463636_21.docx @ 50695 @ @ 1

Do not place the I/O modules on the gold spring contacts!

Do not place the I/O modules on the gold spring contacts in order to avoid soiling

or scratching!

Pos: 20.7 .3 /Ser ie 7 50 ( WAG O-I/ O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sonstige Hinweise/Achtung/Achtung: ESD - Auf g ute Erd ung der Umg ebu ng acht en! @ 7\mod_1266318538667_21.docx @ 50708 @ @ 1

Ensure that the environment is well grounded!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge. When handling the devices, ensure that the environment

(persons, workplace and packing) is well grounded. Avoid touching conductive

components, e.g. data contacts.

Pos: 20.8 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bu ng/A nsc hlüss e/L eist ung sko nta kte/F eldv ers orgu ng - Ü bersc hrift 3 @ 6\ mod_1256294692864_21.docx @ 43664 @ 3 @ 1

3.2.2 Power Jumper Contacts/Field Supply

Pos: 20.9 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte bes chr eibu ng/ Ansc hl üsse /L eist ung sko nta kte nic ht vor ha nde n @ 8\mod_1281073936319_21.docx @ 62530 @ @ 1

The I/O module 750-600 has no power jumper contacts.

Pos: 20 .10 /S erie 750 ( WAG O-I/O-SY ST EM) /Ger äte bes chr eib ung /Ansc hlüs se/ CAG E C LAM P-Ansc hlüsse - Ü bersc hrift 3 @ 6\ mod_1256296337770_21.docx @ 43674 @ 3 @ 1

3.2.3 CAGE CLAMP

Connectors

Pos: 20.1 1 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /A nsc hlüss e/C AGE C L AMP-A nschlüsse 750-xxxx nic ht vor hande n @ 4\mod_1236322132093_21.docx @ 28067 @ @ 1

The I/O module 750-600 has no CAGE CLAMP

connectors.

Pos: 20.1 2 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 15

750-600 End Module

Manual

Version 1.3.0

Pos: 20.1 3 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /An zeig eel em ent e - Ü bersc hri ft 2 @ 4\mod_1240984390875_21.docx @ 31964 @ 2 @ 1

3.3 Display Elements

Pos: 20.1 4 / Ser ie 7 50 ( WAG O-I/ O-SYST EM) /Ger äte besc hrei bung /Anzei geel ement e/An zeige eleme nte 750- xxx x nicht vorhan den @ 4\mod_1236321917062_21.docx @ 28060 @ @ 1

The I/O module 750-600 has no display elements.

Pos: 20.1 5 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /Be di enele me nt e - Über schr ift 2 @ 4\mod_1239191655456_21.docx @ 30439 @ 2 @ 1

3.4 Operating Elements

Pos: 20.1 6 / Ser ie 7 50 ( WAG O-I/ O-SYST EM) /Ger äte besc hrei bu ng/B edi enelemente/Bedienelemente Busklemme 750-xxxx nicht vorhand en @ 4\mod_1236322031125_21.docx @ 28063 @ @ 1

The I/O module 750-600 has no operating elements.

Pos: 20.1 7 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

16 Device Description WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Pos: 20.1 8 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /T echni sc he D at en - Ü bersc hrift 2 @ 3\ mod_1232967587687_21.docx @ 26924 @ 2 @ 1

3.5 Technical Data

Pos: 20.1 9 / Ser ie 7 50 ( WAG O-I/ O-SYST EM) /G erät ebe schr eib ung /Tec hni sch e D ate n/S yste mkle mm en/T ech nisc he D ate n 7 50- 0600 @ 5 \mod_1247561242170_21.docx @ 37372 @ 3 @ 1

3.5.1 Device

Table 5: Technical Data – Device

Width

12 mm

Height (from upper edge of 35 DIN rail)

64 mm

Depth

100 mm

Weight

Approx. 35 g

Pos: 20.2 0 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /An schl uss tec hni k - Ü bersc hr ift 3 @ 17\ mod_1380123271324_21.docx @ 132788 @ 3 @ 1

3.5.2 Connection Type

Pos: 20.2 1 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /Tec h nisch e D ate n/Ans chl uss tec hni k/Te ch nisc he D ate n D aten ko nta kte @ 17 \mod_1380123495844_21.docx @ 132794 @ @ 1

Table 6: Technical Data – Data Contacts

Data contacts

Slide contact, hard gold plated, self-

cleaning

Pos: 20.2 2 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /Tec h nisch e D ate n/Kl imat isc he U mg ebu ngsb edi ng unge n/T ech nisc he D at en Kli m at. U mg ebu ngsb ed. mit er w. Te mp. -20.. .+6 0°C/- 40.. .+ 85°C für /0 25 @ 5\mod_1247658089120_21.docx @ 37606 @ 3 @ 1

3.5.3 Climatic Environmental Conditions

Table 7: Technical Data – Climatic Environmental Conditions

Operating temperature range

0 °C … 55 °C

Operating temperature range for

components with extended

temperature range (750-xxx/025-xxx)

−20 °C … +60 °C

Storage temperature range

−25 °C … +85 °C

Storage temperature range for

components with extended

temperature range (750-xxx/025-xxx)

−40 °C … +85 °C

Relative humidity

Max. 5 % … 95 % without condensation

Resistance to harmful substances

Acc. to IEC 60068-2-42 and

IEC 60068-2-43

Maximum pollutant concentration at

relative humidity < 75 %

≤ 25 ppm

S ≤ 10 ppm

Special conditions

Ensure that additional measures for

components are taken, which are used in

an environment involving:

– dust, caustic vapors or gases

– ionizing radiation

Pos: 20.2 3 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 17

750-600 End Module

Manual

Version 1.3.0

Pos: 20.2 4 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /Z ulas sung en - Üb erschr if t 2 @ 3 \mod_1224055364109_21.docx @ 24030 @ 2 @ 1

3.6 Approvals

Pos: 20.2 5 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /Zul ass ung en /Infor m ati on: Wei ter e Inf orm atio nen z u Z ula ssu nge n 7 50-xxxx @ 3\ mod_1227190967156_21.docx @ 25221 @ @ 1

More information about approvals.

Detailed references to the approvals are listed in the document “Overview

Approvals WAGO-I/O-SYSTEM 750”, which you can find via the internet

under: www.wago.com > SERVICES > DOWNLOADS > Additional

documentation and information on automation products > WAGO-I/O-SYSTEM

750 > System Description.

Pos: 20.2 6 / Ser ie 7 50 ( WAG O-I/ O-SYST EM)/G erät ebesc hreib ung/Z ulass ungen /Allg emei n/Zul assung en Bus klemm e 750-x xxx All gemei n, Stan dard versio n und alle Varia nten - Ei nlei tung @ 3\mod_1233911570312_21.docx @ 27390 @ @ 1

The following approvals have been granted to the basic version and all variants of

750-600 I/O modules:

Pos: 20.2 7. 1 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sta ndar dz ulas su ngen /CE (K onfor mi täts ke nnzei chnung) @ 3\mod_1224494777421_21.docx @ 24276 @ @ 1

Conformity Marking

Pos: 20.2 7. 2 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sta ndar dz ulas su ngen /cU Lus (UL 508) @ 3\mod_1224055013140_0.docx @ 24020 @ @ 1

UL508

Pos: 20.2 7. 3 /D oku ment ati on al lge mein /Gli ed erung sel eme nte/------Le erzei le------ @ 3\mod_1224662755687_0.docx @ 24460 @ @ 1

Pos: 20.2 8 / Alle Ser ie n (All ge mein e M odul e) /Zul ass ung en/S ta ndar dz ulass ung enKC - K ore a C ertif ic ate - END @ 20\mod_1406535623955_21.docx @ 160392 @ @ 1

Korea Certification MSIP-REM-W43-END750

Pos: 20.2 9 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/------Le erz eil e------ @ 3\mod_1224662755687_0.docx @ 24460 @ @ 1

Pos: 20.3 0 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /Zul ass ung en /Ex/ Zul ass ung en B uskl em me 7 50-xx xx Ex, St andar dversi on und alle Vari ante n - Einl eitu ng @ 4\ mod_1239099781531_21.docx @ 30158 @ @ 1

The following Ex approvals have been granted to the basic version and all

variants of 750-600 I/O modules:

Pos: 20 .31. 1 /Al le S eri en ( Allg em ein e Mo dul e)/Z ulas su nge n/E x-Zul ass unge n/TÜ V AT EX/T ÜV 0 7 A TEX 554 086 X: I M 2 Ex d I M b II 3 G E x nA IIC T4 G c II 3 D Ex tc I IIC T13 5°C Dc @ 14\mod_1361949753233_0.docx @ 113015 @ @ 1

TÜV 07 ATEX 554086 X

I M2 Ex d I Mb

II 3 G Ex nA IIC T4 Gc

II 3 D Ex tc IIIC T135°C Dc

Pos: 20.3 1. 2 /Al le S eri en ( Allg em ein e Mo dul e)/Z ulas su nge n/E x-Zul ass unge n/ IEC Ex (T ÜV N or d)/ IEC Ex TU N 0 9. 000 1 X: Ex d I Mb E x nA IIC T 4 Gc E x tc IIIC T 135 °C @ 14\ mod_1361950034299_0.docx @ 113019 @ @ 1

IECEx TUN 09.0001 X

Ex d I Mb

Ex nA IIC T4 Gc

Ex tc IIIC T135°C Dc

Pos: 20.3 1. 3 /Al le S eri en ( Allg em ein e Mo dul e)/Z ulas su nge n/E x-Zul ass unge n/ cUL us/cU L us ( ANSI /ISA 1 2.12 .01) Cl ass I, Di v2 ABCD T4 @ 3\mod_1224054791812_0.docx @ 24014 @ @ 1

ANSI/ISA 12.12.01

Class I, Div2 ABCD T4

Pos: 20.3 1. 4 /D oku ment ati on al lge mei n/Gl ied eru ngs ele ment e/------Le erzeil e------ @ 3\mod_1224662755687_0.docx @ 24460 @ @ 1

Pos: 20.3 2 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

18 Device Description WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Pos: 20.3 3 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /Zul ass ung en /Schi ff /Zul ass ung en B uskl e mme 7 50-x xxx Sc hiff, St and ard versi on un d au fgel ist ete V ari ant en - Einlei tu ng @ 16\ mod_1376313495745_21.docx @ 128461 @ @ 1

The following ship approvals have been granted to the basic version and all

variants of 750-600 I/O modules listed in the table:

Table 8: Ship Approvals

Pos: 20.3 4 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /Zul ass ung en /Schi ff /Zul ass ung en B uskl e mme 7 50-0 600 Schi ff, Ta bel lari sc he Üb ers ich t @ 2 1\mod_1414492498540_0.docx @ 166698 @ @ 1

750-600

/025-000

x x

Pos: 20.3 5. 1 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/ AB S (A meri can Bur eau of S hip pi ng) @ 3\ mod_1224055151062_0.docx @ 24023 @ @ 1

ABS (American Bureau of Shipping)

Pos: 20.3 5. 2 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/ BV ( Bur eau Ver itas ) @ 3\mod_1224492116171_0.docx @ 24220 @ @ 1

BV (Bureau Veritas)

Pos: 20.3 5.3 / All e S erie n (Al lg emei ne D o kume nte) (Al lge mei ne M o dule) /Z ulass ung en/ Schi ffs zul ass ung en/D NV ( De t N ors ke V erita s) C las s B @ 3\mod_1224492540562_0.docx @ 24224 @ @ 1

DNV (Det Norske Veritas) Class B

Pos: 20.3 5. 4 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/G L ( Ger mani sc her Llo yd) C at. A, B, C , D (EMC 1) @ 3\mod_1224492724484_0.docx @ 24228 @ @ 1

GL (Germanischer Lloyd) Cat. A, B, C, D (EMC 1)

Pos: 20.3 5. 5 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/ KR ( Kor ea n Reg ist er of S hip ping) @ 3 \mod_1224492806109_0.docx @ 24232 @ @ 1

KR (Korean Register of Shipping)

Pos: 20.35.6 /Alle Serien (Allgemeine Dokumente) (Allgemeine Mo dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/ LR ( Llo yd’ s R egis ter) En v. 1, 2, 3, 4 @ 3 \mod_1224492890453_0.docx @ 24236 @ @ 1

LR (Lloyd’s Register) Env. 1, 2, 3, 4

Pos: 20.3 5. 7 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/N KK (Ni ppon Kaiji Kyokai) @ 3\mod_1224493002656_0.docx @ 24240 @ @ 1

NKK (Nippon Kaiji Kyokai)

Pos: 20.3 5. 8 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/ PRS ( Pol ski Rej estr St at kó w) @ 3\mod_1224497273250_0.docx @ 24295 @ @ 1

PRS (Polski Rejestr Statków)

Pos: 20.3 5. 9 /Al le S eri en ( Allg em ein e Do ku ment e) (Al lg em eine M o dul e)/Z ulass u nge n/Sc hiff sz ulass ung en/R IN A (R eg istr o It alia no N av ale) @ 3\ mod_1224493078359_0.docx @ 24244 @ @ 1

RINA (Registro Italiano Navale)

Pos: 20.3 5. 10 /D o kume ntatio n allge mein/ Glied erung selem ente/ ------Leerzei le------ @ 3\mod_1224662755687_0.docx @ 24460 @ @ 1

Pos: 20.3 6 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 19

750-600 End Module

Manual

Version 1.3.0

Pos: 20.3 7 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /N orme n u nd Ri chtl i nien - Üb ersc hrif t 2 @ 4 \mod_1242804031875_21.docx @ 33646 @ 2 @ 1

3.7 Standards and Guidelines

Pos: 20.3 8 / Ser ie 7 50 ( WAG O-I/ O-SYST EM) /Ger äte besc hreibung/Normen und Richtlinien/EMV-Nor men Bus klemm e 750-xx xx, Stan dard versio n und all e Varia nten - Einleit ung @ 6\ mod_1263981980650_21.docx @ 48120 @ @ 1

All variations of 750-600 I/O modules meet the following requirements on

emission and immunity of interference:

Pos: 20.3 9 / Alle Ser ie n (All ge mein e M odul e) /Nor men un d Ric htl ini en/EM V- Nor men - Standard/EMV CE-Störaussendung EN 61000-6-3 @ 4\mod_1242798094468_21.docx @ 33598 @ @ 1

EMC CE-Emission of interference acc. to EN 61000-6-3

Pos: 20.4 0 / Alle Ser ie n (All ge mein e M odul e) /Nor men un d Ric htl ini en/EM V- Nor men - Standard/EMV CE-Störf estig keit EN 61000-6- 2 @ 4\mod_1242797655625_21.docx @ 33591 @ @ 1

EMC CE-Immunity to interference acc. to EN 61000-6-2

Pos: 20.4 1 / Alle Ser ie n (All ge mein e M odul e) /Nor men un d Ric htl ini en/EM V- Nor men - Schif fbau /EMV Sc hiff bau-Stör aus se ndu ng G erm ani scher Ll oyd @ 4\mod_1242798400546_21.docx @ 33606 @ @ 1

EMC marine applications-Emission

of interference acc. to Germanischer Lloyd

Pos: 20.4 2 / Alle Ser ie n (All ge mein e M odul e) /Nor men un d Ric htl ini en/EM V- Nor men - Schif fbau /EMV Sc hiff bau-Stör fes tig kei t Ger m anisc her Ll oyd @ 4 \mod_1242798409640_21.docx @ 33610 @ @ 1

EMC marine applications-Immunity

to interference acc. to Germanischer Lloyd

Pos: 21 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

20 Mounting WAGO-I/O-SYSTEM 750

750-600 End Module

Manual

Version 1.3.0

Pos: 22 /Alle Ser ien ( Allg emei n e Mo dule) /Ü ber schr ift en f ür alle Ser ie n/Mo ntier en/M on tier en - Üb erschr ift 1 @ 3\mod_1225446744750_21.docx @ 24900 @ 1 @ 1

4 Mounting

Pos: 23.1 /Serie 750 (WAGO-I/O-SYST EM)/ Mont ieren/D em ontiere n/Mo ntag ereihe nfolg e @ 3\mod_1231770210031_21.docx @ 25992 @ 2 @ 1

4.1 Mounting Sequence

Fieldbus couplers/controllers and I/O modules of the WAGO-I/O-SYSTEM

750/753 are snapped directly on a carrier rail in accordance with the European

standard EN 50022 (DIN 35).

The reliable positioning and connection is made using a tongue and groove

system. Due to the automatic locking, the individual devices are securely seated

on the rail after installation.

Starting with the fieldbus coupler/controller, the I/O modules are mounted

adjacent to each other according to the project design. Errors in the design of the

node in terms of the potential groups (connection via the power contacts) are

recognized, as the I/O modules with power contacts (blade contacts) cannot be

linked to I/O modules with fewer power contacts.

Pos: 23 .2 /Serie 750 (WAGO-I/O-SYST EM)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und so nstig e H inw eis e/Vor sic ht/ Vor sic ht: Verl etz ungs ge fahr dur ch s ch arf kant ige M ess er kont akt e! @ 6\mod_1256193279401_21.docx @ 43414 @ @ 1

Risk of injury due to sharp-edged blade contacts!

The blade contacts are sharp-edged. Handle the I/O module carefully to prevent

injury.

Pos: 23.3 /Serie 750 (WAGO-I/O-SYST EM)/ Wic htige Erl äuter unge n/Sic herhei ts- und sonstige Hinweise/Achtung/Achtung: Busklemmen nur in vorgesehener Reihenfolge stecken! @ 6\mod_1256194177073_21.docx @ 43429 @ @ 1

Insert I/O modules only from the proper direction!

All I/O modules feature grooves for power jumper contacts on the right side. For

some I/O modules, the grooves are closed on the top. Therefore, I/O modules

featuring a power jumper contact on the left side cannot be snapped from the top.

This mechanical coding helps to avoid configuration errors, which may destroy

the I/O modules. Therefore, insert I/O modules only from the right and from the

top.

Pos: 23 .4 /Serie 750 (WAGO-I/O-SYST EM)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und so nstig e H inw eis e/Hi nwei s/Hi n weis : Bu sa bschl us s ni cht ver gess en! @ 6 \mod_1256194225557_21.docx @ 43432 @ @ 1

Don't forget the bus end module!

Always plug a bus end module 750-600 onto the end of the fieldbus node! You

must always use a bus end module at all fieldbus nodes with WAGO-I/O-

SYSTEM 750 fieldbus couplers/controllers to guarantee proper data transfer.