Troy-Bilt 13CC26JD011 Fast Start Guide

Type
Fast Start Guide

This manual is also suitable for

Fill fuel with gasoline purchased within the last
10 days and stored in a non-rusty/dirty can. Do
not fill above the base of fuel tank neck. Check
Oil level as instructed in your Engine Operator’s
Manual.
Check to make sure that both battery
cables are connected.
Make sure that the deck chute/mulch plug
are properly installed and the safety switch
on the deck surface is depressed.
NOTE: The engine will not start if the safety
switch is not depressed.
778-12450C© 2015 13XX26JD
Place PTO (Blade Engage) Lever in the
OFF position.
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Control
Oil Fill /
Dipstick
Ignition
Switch
Brake
Pedal
Fuel Cap
2
B
A
A
A
B
B
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
778-12450C© 2015 13XX26JD
Move the throttle control
into the CHOKE position.
Move Throttle to Fast position.
Insert the ignition key and turn it
to the START position.
Release the ignition key after the engine starts.
Place Shift Lever in N (NEUTRAL) position.
Fully depress the Brake Pedal and engage
the Parking Brake.
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Control
Oil Fill /
Dipstick
Ignition
Switch
Brake
Pedal
Fuel Cap
FAST
SLOW
FAST
SLOW
1
4
3
2
5
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 13CC26JD011 Fast Start Guide

Type
Fast Start Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI