Troy-Bilt 31AS62N2711 Fast Start Guide

31AS62N2711
Troy-Bilt
Brand
Troy-Bilt
Model
31AS62N2711
Type
Fast Start Guide

Troy-Bilt 31AS62N2711 is a powerful snow thrower designed to make winter snow removal a breeze. With its 212cc engine and 24-inch clearing width, it can handle even the heaviest snowfalls. The electric starter and push-button controls make it easy to operate, while the adjustable chute allows you to direct the snow wherever you want it to go.

Troy-Bilt 31AS62N2711 is a powerful snow thrower designed to make winter snow removal a breeze. With its 212cc engine and 24-inch clearing width, it can handle even the heaviest snowfalls. The electric starter and push-button controls make it easy to operate, while the adjustable chute allows you to direct the snow wherever you want it to go.

778-11820B© 2013 31AS62N2
Chute Assembly
Handle Knobs
Chute Adapter
Upper Handle
Chute
Directional
Control
Chute Bracket
Shift Lever
A. Place shift lever into F6
position.
B. Pivot upp er han dle into
operating position
C. Tighten handle knobs.
A
B
C
Place chute assembly
onto chute adapter.
Close the three
flange keepers.
Keepers will click
into place when
properly secured.
Remove flat washer and
hairpin clip.
Insert chute directional
control into chute
bracket.
Secure with washer and
clip.
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Oil Fill /
Dipstick
Electric Starter
Button
Electric Starter
Outlet
Primer
Key
Throttle
Control
Choke
Control
Gas Fill
778-11820B© 2013 31AS62N2
Move throttle control into
the Fast position.
Move the choke control
into the Choke
position.
A. Connect an extension cord
to the electric starter outlet.
B. Plug the other end of the
cord into a three-prong
120-volt, grounded, AC
receptacle.
Push primer
three times.
Fill fuel tank with clean,
fresh gasoline. Do not fill
above the base of fuel
tank neck.
Check the oil level using
the dipstick. Add oil if
necessary. (Refer to the
Operator’s Manual)
Insert the key into the
key switch until the key
snaps into place.
Do not turn the key!
A. To start engine,
push the starter
button.
B. When engine
starts, slowly move
choke control
into the Run
position.
C. Disconnect cord
from power
receptacle fi rst and
then from snow
thrower’s outlet.
1
4
2
5
3
6
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 31AS62N2711 Fast Start Guide

31AS62N2711
Troy-Bilt
Brand
Troy-Bilt
Model
31AS62N2711
Type
Fast Start Guide

Troy-Bilt 31AS62N2711 is a powerful snow thrower designed to make winter snow removal a breeze. With its 212cc engine and 24-inch clearing width, it can handle even the heaviest snowfalls. The electric starter and push-button controls make it easy to operate, while the adjustable chute allows you to direct the snow wherever you want it to go.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents