Troy-Bilt 13WQ93KP011 Fast Start Guide

Brand: Troy-Bilt

Model: 13WQ93KP011

Type: Fast Start Guide

Attach the red cable to the positive (+) battery

terminal and attach the black cable to the

negative (–) battery terminal with the bolts and

hex nuts.

Position the red rubber boot over the

positive battery terminal.

Remove the shipping brace from the

discharge opening by grasping it

between your thumb and index finger

and rotating it clockwise.

PTO (Blade

Engage) Knob

Throttle

Control

Ignition

Switch

Brake

Pedal

Fill fuel tank with clean, fresh gasoline.

Do not fill above the base of fuel tank neck.

Note: Steering Wheel not shown for clarity.

Place PTO (Blade Engage) Knob in Off position.

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND

FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .

Need Help? Call 1-888-TO-HELP-U

Note: Steering Wheel not shown for clarity.

Move the throttle control

into the Choke

position

Move the throttle control

into Fast

position.

Fully depress the Brake Pedal.

PTO (Blade

Engage) Knob

Throttle

Control

Normal

Mowing

Ignition

Switch

Brake

Pedal

Insert the ignition key and turn it

to the Start

position.

Release the key into the Normal Mowing position

after the engine starts.

FAST

SLOW

FAST

SLOW

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND

FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .

Need Help? Call 1-888-TO-HELP-U

Troy-Bilt 13WQ93KP011 Fast Start Guide

Troy-Bilt 13WQ93KP011 Fast Start Guide

Troy-Bilt 13WQ93KP011 Fast Start Guide

Related papers

Other documents