Copystar FS-C2526MFP Operating instructions

Type
Operating instructions
SETUP AND OPERATION GUIDE
July 11th, 2011
Kyocera Mita America, Inc.
Software Solutions Group
Teaching Assistant
HyPAS-Enabled
1. Table of Contents
2. Introduction .................................................................................................................................... 4
2.1 Trademarks ................................................................................................................................... 4
2.2 Software ........................................................................................................................................ 4
2.3 This Guide ..................................................................................................................................... 4
2.4 Supported MFP Models ................................................................................................................ 5
2.5 Licensing ........................................................................................................................................ 5
3. Typical Workflow .......................................................................................................................... 6
3.1 Creating an exam .......................................................................................................................... 6
3.2 Automated Test Grading ............................................................................................................... 7
4. Operation ......................................................................................................................................... 8
4.1 Creating Tests ................................................................................................................................ 8
Changing Test Sheet Title ...................................................................................................................... 9
4.2 Grading Tests .............................................................................................................................. 10
Changing Grade Letter Percentages ................................................................................................... 12
5. Reports ............................................................................................................................................ 13
5.1 Summary Report ......................................................................................................................... 13
5.2 Detailed Report ........................................................................................................................... 15
6. Setup ................................................................................................................................................ 16
6.1 Files Required .............................................................................................................................. 16
6.2 MFP Setup ................................................................................................................................... 16
6.3 Installation on A4 Desktop MFP .................................................................................................. 16
6.4 Installation on Workgroup (A3) MFP .......................................................................................... 19
7. Configuration Options ............................................................................................................... 24
7.1 Configuring Printing Application ................................................................................................. 24
7.2 Configuring Grading Application ................................................................................................. 24
Options ................................................................................................................................................ 26
8. Troubleshooting .......................................................................................................................... 27
8.1 Unable to Print tests ................................................................................................................... 27
8.2 Unable to Scan tests for grading ................................................................................................. 27
4
2. Introduction
2.1 Trademarks
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation of
either the United States or other countries.
Windows XP is a trademark of Microsoft Corporation.
Microsoft Windows Vista, Microsoft Windows 7, SharePoint and Microsoft Internet
Explorer are trademarks of the Microsoft Corporation in the U.S. and other countries.
Adobe Acrobat and Adobe Reader are trademarks of Adobe Systems, Incorporated.
Other company names and product names in this Operation Guide may be the
trademarks or registered trademarks of their respective owners. TM and ® are not
mentioned in each case in this guide.
2.2 Software
Kyocera’s Teaching Assistant is a software application for automated printing and grading of
multiple-choice exams using popular bubble-sheet forms. Teaching Assistant simplifies the task
of printing, collecting and analyzing test results for educators, while ensuring accuracy and
reducing the amount of time spent grading these important documents. Integrated with
Kyocera’s HyPAS-enabled Multifunctional Products (MFP), learning institutions can accomplish
the task of printing and grading test sheets, maximizing efficiency, saving valuable time for
educators to concentrate on students and lesson-plans. Teaching Assistant maximizes savings
for an institute by eliminating the need to order expensive pre-printed bubble sheets and by
not requiring any network resources.
2.3 This Guide
This document describes the components, functions, installation requirements and setup steps
required to deploy Teaching Assistant effectively at a school or institute.
Since Teaching Assistant offers multiple configuration options, it is essential to understand the
workflow and configuration options to deploy this solution correctly.
5
2.4 Supported MFP Models
HyPAS-Enabled MFPs
Color MFPs
TASKalfa/CS 7550ci
TASKalfa/CS 6550ci
TASKalfa/CS 5550ci
TASKalfa/CS 4550ci
TASKalfa/CS 3550ci
TASKalfa/CS 3050ci
TASKalfa/CS 552ci
TASKalfa/CS 500ci
TASKalfa/CS 400ci
TASKalfa/CS 300ci
TASKalfa/CS 250ci
B&W MFPs
TASKalfa/CS 8000i
TASKalfa/CS 6500i
TASKalfa/CS 5500i
TASKalfa/CS 4500i
TASKalfa/CS 3500i
TASKalfa/CS 520i
TASKalfa/CS 420i
TASKalfa/CS 300i
HyPAS-Capable MFPs*
Color MFPs
FS-C2526MFP
FS-C2626MFP
B&W MFPs
FS-3540MFP
FS-3640MFP
* A4 Desktop MFPs require a compatible CF-
card to be installed prior to installing
applications.
2.5 Licensing
Teaching Assistant requires the purchase of a software license from an authorized Kyocera or Copystar
dealership.
The software can be evaluated, free of charge, during a 30 day trial period. The application will stop
working when the trial period expires and require a license key be entered to continue using the
application.
6
3. Typical Workflow
3.1 Creating an exam
When an instructor needs to create a multiple choice exam, Teaching Assistant is used to print blank
test sheets; one for each student. These blank test sheets are handed to the class at the start of the test.
Test questions could be posted on a board or handed to the students along with the test sheets.
Students write their name and fill out their student ID in the space provided. Each question is answered
by shading the corresponding bubble on the test sheet. After completing the test, students return their
marked test sheets back to the instructor.
Answer Test
Print Blank Tests
7
3.2 Automated Test Grading
The instructor fills out the correct answers for each question on a designated answer key page, which
is also printed out along with blank test sheets.
When ready, the instructor scans all the test sheets along with the answer key at the MFP into Teaching
Assistant. Teaching Assistant scores each student’s test and prepares a report of the actual results from
each student. The report can be:
a. Printed at the MFP in summary or detailed form.
b. Sent to the instructor as a PDF in an email attachment.
c. Saved to a USB flash drive as a PDF file.
When the teacher exits the Teaching Assistant application, all the files are cleared from the MFP.
Mark Correct Answers
Scan
Print
8
4. Operation
Teaching Assistant consists of two applications; one to print the tests, the second for automated grading
of the tests. The grading application will only support tests printed from Teaching Assistant.
4.1 Creating Tests
1. Open the Applications screen (by pressing the Application key on the panel).
2. Press ‘Print Test’ button.
3. Enter values for:
a. Number of Questions (to appear on the test); teachers can select from 2-500 questions.
b. Number of Answer Choices (for each question); teachers can designate from 2-8
choices.
c. Number of Students (taking the test); no limit is set for number of students.
4. Select other options:
a. Check ‘Print Answer Key’ if you want a blank answer key page that is required for
grading. (Default: checked)
b. Check the ‘Print Student ID bubbles’ checkbox if students are required to enter their IDs
on the answer sheets. (Default: unchecked)
5. Press Green button to start printing (or touch the Print button on the panel, or press the Enter
key on the keypad).
6. MFP will now print the blank test sheets.
9
7. Blank sheets (excluding the answer key page) are handed out to the class, along with the
question papers.
8. Students select an answer by shading the corresponding bubble either with a pencil or pen.
Note: Bubbles must be shaded fully.
Changing Test Sheet Title
To temporarily change the test title, press the Title button. The test title can be changed to test-specific
text such as “Math Exam – 5
th
Grade”. The title will be printed on all test sheets and will also appear on
reports that are printed after grading.
10
4.2 Grading Tests
1. Teacher must fill out the correct answers on the ‘Answer Key’ page. Ensure all questions are
answered.
2. Open the Applications screen (opened by pressing the Application key on the panel).
3. Press ‘Grade Test’ button.
4. Arrange the test sheets so that they are all (a) facing the same side, (b) aligned the same way.
5. Place answer key on top of the stack
6. Place all the test sheets and answer key page in the document feeder:
a. Printed side facing up
b. Long-edge of the paper in the feeder (document placed sideways).
7. Press the Green button (or, the Enter key on the keypad, or the Scan button on the panel).
8. After scanning is completed, press the Finished button on the panel (or press the enter key on
the keypad).
11
9. After grading is completed, four options are presented for report generation.
10. Press ‘Summary’ button to print result summary.
11. Press ‘Detail’ button to print a detailed summary.
12. Press ‘Email’ button to send the report to an email address. The MFP will prompt to enter the
destination email address.
12
(Note: SMTP settings must be configured as described in section 7.2 for this feature to work.)
13. Press ‘Save to USB’ to save the results to a USB flash drive. (Note: USB drive must be inserted in
the copier PRIOR to pressing the Save to USB button. After the files are saved, the drive must be
‘cleanly-ejected’ by pressing the ‘Remove’ button on the Job Status/cancel screen Removable
Memory tab.)
Changing Grade Letter Percentages
To temporarily change the percentage threshold for a grade letter, press the Option button prior to
grading the test. To make permanent changes, refer to section on Configuring Grading Application.
13
5. Reports
After grading process is completed, Teaching Assistant will allow the instructor to either print the
reports at the MFP or export them in PDF format. Exported reports can be sent directly to an instructor
as email attachments or saved to USB flash drives.
5.1 Summary Report
Summary report enables an instructor to tell at a glance, how the students fared, how hard the test was
and which questions troubled most students. Summary reports consist of the following elements.
Test Scores Table
Lists each student’s score as points, percentage and
percentile.
The No. column contains the student ID as
marked on the ID bubbles.
The Name column contains student names as
written by each student - in the student’s own
handwriting.
The table is ordered by score listing the
highest scoring student first.
14
Test Scores Chart
Bar-graph of student scores ordered by student performance. Instructors can tell at a glance which
students need help and which students performed very well.
Histogram of grades
Show the number of students who scored each grade letter: A, B, C, D and F. (Note: Grades in the
histogram report will be based on the thresholds for each letter grade set at the device.)
15
Test Statistics
Statistics on test questions helps the instructor focus
on areas of the test that most students had difficulty
with.
Lowest and highest scores.
Average and Median scores.
List of 10 hardest and 10 easiest questions,
based on actual test results.
5.2 Detailed Report
16
6. Setup
6.1 Files Required
TeachingAssistant.pkg
PrintBubbleSheet.pkg
6.2 MFP Setup
1. Ensure the MFP is updated to the latest available firmware level.
2. MFP must be connected to a network port and link lights must be active.
3. MFP can have at least two empty application slots (under System Menu > Applications).
4. A4 Desktop MFPs require a compatible CF-card to be installed prior to installing applications.
6.3 Installation on A4 Desktop MFP
1. Copy both .pkg files to the root of a clean USB flash drive.
2. At the MFP control panel, open System Menu/Counter >Favorites/ Application
3. Log in as Administrator when prompted. The default login name is Admin and the default
password is Admin (Note: Enter capital A when entering ‘Admin’ as both login name and
password fields are case-sensitive).
4. Press Application button.
5. Press Menu button.
17
6. Press Add button.
7. Insert USB flash drive into copier.
8. A list showing both applications will appear.
9. Select both applications and press Install.
10. After installation, press End to return to the Applications screen.
11. Select Print Test and press Menu.
18
12. Press Activate. Select Yes when prompted for confirmation.
13. Select Print Test and press Menu.
14. Press Activate. MFP will prompt for Activation Mode. If a license key is available, select the
Official and press Next button. Otherwise, press the Trial button for a limited-time trial
installation. If the Trial button is disabled, a license must be purchased. Please contact your
Kyocera/Copystar dealership to purchase a license key.
19
15. If Official button is pressed, MFP will prompt for license key. Enter it using the keypad and press
the OK button.
16. After both applications are activated successfully, they can be executed from the main
Applications screen (opened by pressing the Application key on the panel).
6.4 Installation on Workgroup (A3) MFP
1. Copy both .pkg files to the root of a clean USB flash drive.
2. At the MFP control panel, open System Menu > Applications
3. Log in as Administrator when prompted. The default login name is Admin and the default
password is Admin (Note: Enter capital A when entering ‘Admin’ as both login name and
password fields are case-sensitive).
20
4. Press Add button.
5. Insert USB flash drive into copier.
6. A list showing both applications will appear.
7. Select both applications and press Install.
8. After installation, press Close to return to the Applications screen.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

Copystar FS-C2526MFP Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI