Axema C20 User manual

Alarm module C20

Alarm module C20 is used to control an external alarm system from VAKA

Manual (En)

Updated 2019-05-03

Alarm module C20

Connection 3

Terminals 3

Installation and configuration 3

2 (3)

Manual (En) C20

Connection

1. Disconnect the controllers power.

2. Mount the module in any module position in the door controller

3. Mount the supplied connector under the module and connect it according

the terminal description.

4. Supply the controller with power.

Terminals

Terminal Function

1 Alarm relay (C)

2 Alarm relay (NO)

3 Alarm relay (NC)

4 +5V 20mA

5 Red LED +

6 Red LED -

7 ASF +

8 ASF -

Installation and configuration

This manual describes how the device is mounted and connected. For information

regarding installation and configuration please see https://info.axema.se?vaka.

3 (3)

Manual (En) C20

Download PDF