Step 1:
Attach middle pole (B) to flower pole (A) by
screwing it to the right until it is firmly tightened.
Step 2:
Attach stake base (C) to middle pole (B) (the
result of step 1) by screwing it to the right until it is
firmly tightened.
Step 3:
Attach top pole (D) to flower pole (A) (the result of
step 2) by inserting it through the opening above.
Step 4:
Attach wing nut (E) to top pole (D) (the result of
step 3) by screwing it to the right until it is firmly
tightened.
Note: Product (flower pole) may vary depending on item purchased.
Top Pole
Flower Pole Middle Pole
Rain Gauge
Stake Base
Wing Nut
19701-RS