2. exhart
  3. 71881-RS

exhart 71881-RS Operating instructions

  • Hello! I've reviewed the assembly instructions for the exhart Garden Stake 71881-RS. This document provides a step-by-step guide to setting up your kinetic garden decoration, starting from attaching the spinner to connecting the stake base. I'm ready to answer your questions regarding the assembly process or any other details from the document.
  • What parts are included in the package?
    What is the first step in assembling the garden stake?
    What tool is used to tighten the nut bolt?
Top Pole
Nut Bolt Middle PoleWrench Stake Base Stake Support
BarrelSpinner Front Spinner
Step 1:
Attach spinner (B) to top pole (A) by inserting it
through the opening.
Step 2:
Attach barrel (C) to spinner (B) (the result of step
1) by inserting it through the opening.
Step 3:
Attach front spinner (D) to barrel (C) (the result of
step 2) by inserting it through the opening.
Step 4:
Attach nut bolt (E) to front spinner (D) (the result
of step 3) by using wrench (F) and screwing it to
the right until it is firmly tightened.
Note:
Product (Spinners & Nut Bolt) may vary depending on purchase.


71881-RS
Step 5:
Attach middle pole (G) to top pole (A) (the result
of step 4) by screwing it to the right until it is firmly
tightened.
Step 7:
Attach stake base (H) (result of step 6) to middle
pole (G) (result of step 5) by screwing it to the
right until it is firmly tightened.
Step 6:
Attach stake support (I) to stake base (H) by
inserting it through the opening.
Lay assembly down for the following steps:
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2020 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-(800) 775-5503 | [email protected]
exhart.com
/