Big Spinner

Middle Pole x2 Stake Base Stake Support

Small Spinner

Top Pole

Step 1:

Attach big spinner (B) with indents facing outward

to top pole (A) by inserting it through the opening.

Step 2:

Step 4:

Attach cap (E) to small spinner (D) (the result of

step 3) by screwing it to the right until it is firmly



Step 5:

Attach middle pole (F) to top pole (A) (result of

When everythjng is assembled, insert stake base firmly into the ground. For best results, install on flat ground and

ensure that the stake is 90 degrees vertical to the ground.

Step 6:

Attach middle pole (F) to second middle pole (F)

Lay assembly down for the following steps: