9A450001
Installation Instructions
INS-9A450001 (Rev.B)
Run screws into accessory
mounting bracket to within
1/16” of the bracket surface
Attach container hanger to
accessory mounting bracket
with (2) screws provided).
Slip the SC (Sharps Container)
accessory onto the wire
bracket.
Securely attach accessory
mounting bracket to the table
column at the desired height
1
2
3
Tools required:
Phillips head screwdriver or #2 Square drive bit
Parts Included:
(2) Accessory Mounting Brackets
(2) #10-24 x 7/8” Long Phillips Drive Pan Head Machine Screws
(2) #10-24 x 1” Long Phillips Drive Pan Head Machine Screws
(1) Container Holder
(1) Sharps Container - Mailbox Lid
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
