19
STAGE PAGE
81 Right-hand exhaust manifolds 306
82 Left-hand exhaust manifolds 310
83 Exhaust pipe connectors 314
84 Distributor (I) 317
85 Distributor (II) 320
Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.
Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.
All rights reserved © 2021
Warning: Not suitable for children under the age of 14.
is product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
306
Ford GT
Faros y capÓ
81-A Exhaust manifold 1
81-B Exhaust manifold 2
81-C Exhaust manifold 3
81-D Exhaust manifold 4
81-E Hose
Your parts
81-A
81-B
81-C 81-D
81-E
`
Stage 81: Right-hand exhaust
manifolds
STEP BY STEP
307
STEP 81-3
Insert exhaust manifold 2
(81B) – marked with “R2”
– into hole “2” in the right
cylinder head (78A). Ensure
that the curved end of the
manifold is fully inserted into
the cylinder head.
STEP 81-2
Find where the exhaust manifolds go –
numbered 1-4 in the photo – on the right
cylinder head (78A).
Insert exhaust manifold 1 (81A) – marked with
“R1” on the end – into hole “1” in the right
cylinder head. Ensure that the curved end of
the manifold is fully inserted into the cylinder
head, as shown in the photo.
STEP 81-1
Attach the hose (81E) to the
linchpin on the inside of the
right-hand side of the front
axle subframe (71A). Ensure
that the linchpin is fully
inserted into the hose.
Linchpin
432
2
1
81-A
81-B
78-A
81-E
71-A
1
78-A
308
Ford GT
STEP 81-4
Attach exhaust manifold
3 (81C) in the same way.
This manifold, marked
with “R3”, goes into hole
“3” in the right cylinder
head (78A).
STEP 81-5
Now insert exhaust manifold
4 (81D) – “R4” – into hole
“4” in the right cylinder head
(78A).
4
3
81-C
81-D
78-A
78-A
STEP BY STEP
309
STAGE COMPLETE!
310
Ford GT
Faros y capÓ
82-A Exhaust manifold 1
82-B Exhaust manifold 2
82-C Exhaust manifold 3
82-D Exhaust manifold 4
Stage 82: Left-hand exhaust
manifolds
`
Your parts
82-A
82-B
82-C
82-D
STEP BY STEP
311
STEP 82-2
Insert exhaust manifold 2
(82B) – marked with “L2”
– into hole “2” in the left
cylinder head (76A). Ensure
that the end of the manifold
is fully inserted into the
cylinder head.
STEP 82-1
Find where the exhaust
manifolds go – numbered
1-4 in the photo – on the left
cylinder head (76A). Insert
exhaust manifold 1 (82A) –
marked with “L1” – into hole
“1” in the left cylinder head
(76A). Ensure that the curved
end of the manifold is fully
inserted into the cylinder
head, as shown in the photo.
82-B
2
1234
1
76-A
76-A
312
Ford GT
STEP 82-3
Attach exhaust manifold
3 (82C) in the same way.
This manifold, marked
with “L3”, goes into hole
“3” in the left cylinder
head (76A).
STEP 82-4
Now insert exhaust manifold
4 (82D) – “R4” – into hole
“4” in the left cylinder head
(76A).
3
4
82-C
82-D
82-D
82-C
82-B
82-A
76-A
76-A
STEP BY STEP
313
STAGE COMPLETE!
314
Ford GT
83-A Cárter
83-B Panel delantero
del bloque motor
83-C Mecanismo de poleas
83-D Alternador
83-E Tubos
83-F Tornillos FP01
2,3 x 4 mm Ø 3,8 mm
83-G Tornillos FP07
2,3 x 4 mm Ø 5,2 mm
Panel delantero
del motor y poleas
piezas incluidas en la entrega 83
Nota: el aspecto de las piezas que se ven en estas páginas puede ser ligeramente distinto a las piezas físicas incluidas en esta entrega.
83-A
83-B 83-C
83-D
83-E
83-A Exhaust pipe
connectors
83-B Dual exhaust pipe
83-C Screws FD04
1.8 x 3.5 mm Ø 3 mm
Your parts
83-A
83-B
FD04
Stage 83: Exhaust pipe
connectors
STEP BY STEP
315315
STEP 83-1
Attach one of the exhaust pipe
connectors (83A) to the four left-
hand exhaust manifolds. Insert
the ends of the manifolds into the
holes in the connector, as shown
in the photo. Press the connector
rmly into place.
STEP 83-3
Attach the dual exhaust pipe
(83B) to the exhaust pipe
connectors (83A). Insert the
linchpins on the end of the
exhaust pipe into the holes in
the connectors and press rmly
into place. The hole in the cross
bar on the exhaust must
be aligned with the
linchpin on the top
of the gearbox.
STEP 83-2
Now attach the second connector
(83A) to the right-hand exhaust
manifolds. Insert the ends of the
manifolds into the holes in the
connector.
83-A
83-A
83-A
83-B
Linchpin
Hole
316
Ford GT
STEP 83-4
Secure the dual exhaust
pipe (83B) to the top of the
gearbox with one FD04 screw,
as shown in the photo.
STAGE COMPLETE!
83-B
FD04
STEP BY STEP
317
Faros y capÓ
84-A Distributor
84-B Spark plug wires
`
Your parts
84-A
84-B
Stage 84:
Distributor (I)
318
Ford GT
STAGE
COMPLETE!
STEP 84-1
Attach one of the spark plug wires
(84B) to one of the eight outer
linchpins on the cap of the distributor
(84A). Ensure it completely covers the
linchpin. Now attach the other wires to
the same side as the rst. Note that the
central linchpin must remain free.
84-A
84-B
Outer
linchpin
Central
linchpin
STEP BY STEP
319
A THOROUGHBRED THROUGH AND THROUGH
The Ford GT40 is a racing beast, a thoroughbred racing car, as demonstrated by its countless
victories on the circuits over the years. The engine of your model is an exact reproduction of the
4.9-litre engine of the GT Mk 1 that won the 24 Hours of Le Mans in 1969.
This model is a perfect reproduction of the
GT40, thanks to the miniature reproduction of
the car’s details, both inside and out.
· 4-1 dual exhaust
· Four Weber twin-barrel
carburettors
· Mid, longitudinally mounted
engine
· Eight cylinders (V8)
· 4.9 cc
· 425 bhp at 6000 rpm
320
Ford GT
Faros y capÓ
85-A Spark plug wires (4)
85-B Spark plug connectors
85-C FD01 Screws 2.3 x 4 mm
Stage 85:
Distributor (II)
Your parts
FD01
85-A
85-B
STEP BY STEP
321
STEP 85-3
Now position the distributor
(84A) on the engine block.
Ensure that all of the spark
plug wires are inside the
engine, as shown in the
photo. Secure the distributor
to the base with one FD01
screw.
STEP 85-2
Attach one of the spark plug wires (85A) to one
of the free outer linchpins on the distributor
(84A). Now attach the remaining wires. Now
that the ignition switch wire and eight spark
plug wires are all in place, the distributor is
complete.
STEP 85-1
Get the distributor (84A) you
received with the previous
pack. Attach the ignition
switch wire – the shortest of
the wires you received with
this pack – to the central
linchpin on the distributor,
pressing it rmly into place.
FD01
85-B
84-A
84-A
85-A
84-A
Base
322
Ford GT
STEP 85-4
Find the connection points for
the spark plug wires in the
left cylinder head (76A) - as
shown - and the right cylinder
head (78A). These four small
terminals – numbered in the
photo – are located near the
base of the manifold. Divide
the wires into two groups
of four, leaving the ignition
switch wire (85B) in the
middle.
STEP 85-6
Now feed the other
three wires on the
right side through
the manifolds and
attach them to the
free terminals.
STEP 85-5
Take one of the back wires (84B) from the right
side and feed it through the manifolds. Now
attach the wire to the furthest terminal, in this
case the one closest to the wheel.
1
2
3
4
85-B
76-A
84-B
84-B
84-B
STEP 85-7
Now attach all the
spark plug wires on
the left side to the
terminals on the left
cylinder head (85A).
STAGE COMPLETE!
85-A
/
