Anova T1038T Assembly Instruction

Brand: Anova

Model: T1038T

Type: Assembly Instruction

This manual is also suitable for

T1038R

Anova T1038T is a traditional 8’ rectangular picnic table made from durable Thermory® and stainless steel hardware. It features two ADA-compliant benches, a spacious tabletop, and sturdy cross braces for added stability. Perfect for parks, campgrounds, and other outdoor settings, this picnic table is built to withstand heavy use and provide a comfortable seating experience for all users. Assembly is simple and requires only basic tools.

Assembly Instructions

Component parts:

Assembly:

Hardware Needed: All hardware is stainless steel.

800.231.1327

[email protected]

1. Inspect the shipping container contents for damaged or missing components.

2. Lay all parts on a so work surface or on the shipping packaging to prevent damage to nish.

NOTE: Before assembly, it is recommended that a light oil or petroleum jelly be applied to screw threads.

Tools Needed:

• 3/4” Hex Wrench

• 3/4 Hex Socket with Ratchet

• Retractable Measuring Tape

• Pencil

T1038T - 8’ Rectangular Thermory® ADA Picnic Table

T1038R - 8’ Rectangular Recycled Plastic ADA Picnic Table

Traditional Picnic Tables

(4) Table Supports (1) Table Top

(1) Long Bench

(2) ADA Bench

(4) Cross Braces

(32) 5/16"-18 x 1 1/4"

Hex Head Bolts

(32) 5/16-18

Nylock Nuts

(64) 5/16 Flat

Washers (8) Rubber Feet

Assembly Instructions

Traditional Picnic Tables

3. Locate the Table Supports and insert the rubber

plugs into the two outer hole on the supports

4. Lay the Table Top face down on a so work

surface.

5. Take the Table Support and line the holes up

with the mounting holes on the Table Top.

6. Using one bolt, two washers, and one nut for

each hole, attach the Table Suppport to the

Table Top. Hand tighten to secure the part.

7. Locate a Cross Brace. Align the cross brace with

the connecting point on the Table Support and

the Table Top.

8. Attach the Cross Brace to the Table Support and

the Table Top using one bolt, two washers, and

one nut. Hand tighten to secure the part.

9. Repeat Steps 5 through 8 for each remaining

Cross Brace and Table Support.

Assembly Instructions

Traditional Picnic Tables

• Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,

missing, or broken hardware, and general instability

• Furniture that is damaged or appears to be unstable must be removed from service and repaired or replaced

• Repairs must be made using only factory authorized parts and methods.

WARNING

• Do not drag the assembled unit across any surface.

• This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to remove

surface dirt. Do not clean with a solvent or petroleum based products.

CARE AND

MAINTENANCE

Note: Please contact Customer Care at 1-866-797-1761 when ordering replacement parts.

10. Take the long seat and align the seat with the

arm on the Table Support.

11. Secure it to the Supports with one bolt, two

washers, and one nut per hole and hand

tighten.

12. Locate the ADA Bench and align the seat with

the opposing arm of the Table Supports.

13. Secure the ADA Bench using one bolt, two

washers, and one nut per hole and hand

tighten.

14. Repeat Steps 12 and 13 with the second ADA

Bench.

Anova T1038T Assembly Instruction

Brand: Anova

Model: T1038T

Type: Assembly Instruction

This manual is also suitable for

T1038R

Download PDF

report

Anova T1038T Assembly Instruction

This manual is also suitable for

Anova T1038T Assembly Instruction

Related papers

Other documents