Intermec CK60 Ethernet Multidock Installation guide

CK60 Ethernet Multidock
Intermec
Brand
Intermec
Model
CK60 Ethernet Multidock
Category
Wall & ceiling mounts accessories
Type
Installation guide

Intermec CK60 Ethernet Multidock is a versatile docking station designed to enhance the functionality and usability of your mobile devices. With its Ethernet connectivity, you can seamlessly integrate your devices into a wired network, enabling fast and reliable data transfer. The multidock also features multiple expansion ports, allowing you to connect various peripherals such as keyboards, mice, and printers, transforming your mobile device into a complete workstation.

Intermec CK60 Ethernet Multidock is a versatile docking station designed to enhance the functionality and usability of your mobile devices. With its Ethernet connectivity, you can seamlessly integrate your devices into a wired network, enabling fast and reliable data transfer. The multidock also features multiple expansion ports, allowing you to connect various peripherals such as keyboards, mice, and printers, transforming your mobile device into a complete workstation.

1 Position the mounting brackets over the screw holes then using the screws
(included) mount the brackets to the multidock. The mounting holes are 15-3/4
inches (40.01 cm) apart.
2 On framed walls, it is preferable to drive lag screws directly into studs whenever
possible. If this is not possible, it may be necessary to install scab studs or
plywood (5/8 inch thickness or greater) reinforcement.
3 Position mounting brackets at a suitable height and use 1/4 inch or larger
hardware *(lag screws or concrete fasteners) to secure mounting brackets to the
wall. Use two fasteners in each bracket.
4 When installing several multidocks across a wall, be sure to allow clearance
between them for the power cables.
1 Position the mounting brackets over the screw holes then using the screws
(included) mount the brackets to the multidock. The mounting holes are 15-3/4
inches (40.01 cm) apart.
2 On framed walls, it is preferable to drive lag screws directly into studs whenever
possible. If this is not possible, it may be necessary to install scab studs or
plywood (5/8 inch thickness or greater) reinforcement.
3 Position mounting brackets at a suitable height and use 1/4 inch or larger
hardware *(lag screws or concrete fasteners) to secure mounting brackets to the
wall. Use two fasteners in each bracket.
4 When installing several multidocks across a wall, be sure to allow clearance
between them for the power cables.
1 Position the mounting brackets over the screw holes then using the screws
(included) mount the brackets to the multidock. The mounting holes are 15-3/4
inches (40.01 cm) apart.
2 On framed walls, it is preferable to drive lag screws directly into studs whenever
possible. If this is not possible, it may be necessary to install scab studs or
plywood (5/8 inch thickness or greater) reinforcement.
3 Position mounting brackets at a suitable height and use 1/4 inch or larger
hardware *(lag screws or concrete fasteners) to secure mounting brackets to the
wall. Use two fasteners in each bracket.
4 When installing several multidocks across a wall, be sure to allow clearance
between them for the power cables.
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Multidock Mounting Brackets Installation Instructions
*931-001-001*
P/N 931-001-001
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Multidock Mounting Brackets Installation Instructions
*931-001-001*
P/N 931-001-001
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Multidock Mounting Brackets Installation Instructions
*
931-001-001*
P/N 931-001-001
CK60 Multidock Mounting Brackets CK60 Multidock Mounting Brackets
CK60 Multidock Mounting Brackets
Installation Instructions Installation Instructions Installation Instructions
  • Page 1 1

Intermec CK60 Ethernet Multidock Installation guide

CK60 Ethernet Multidock
Intermec
Brand
Intermec
Model
CK60 Ethernet Multidock
Category
Wall & ceiling mounts accessories
Type
Installation guide

Intermec CK60 Ethernet Multidock is a versatile docking station designed to enhance the functionality and usability of your mobile devices. With its Ethernet connectivity, you can seamlessly integrate your devices into a wired network, enabling fast and reliable data transfer. The multidock also features multiple expansion ports, allowing you to connect various peripherals such as keyboards, mice, and printers, transforming your mobile device into a complete workstation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents