CK60 Ethernet Multidock

Intermec CK60 Ethernet Multidock Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Intermec CK60 Ethernet Multidock Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
The Intermec CK60 Handheld Computer Auto Adapter (p/n: 852-057-003) allows
you to power your CK60 Handheld Computer from your vehicle’s electrical
system.
1 Attach the Auto Adapter to the docking connector of your CK60 Handheld
Computer.
2 Connect the Auto Adapter to your vehicle’s cigarette lighter jack/power port.
The LED on the Adapter illuminates green when power is applied to your CK60.
Should the LED not illuminate:
1 Check that the lighter/power port is receiving power from the vehicle.
2 Check the fuse in the Auto Adapter. Unscrew the power tip to inspect the fuse. If
a replacement is needed, use a 5A 12V fuse.
The input voltage range on the Auto Adapter is 10-14 Volts DC.
The Intermec CK60 Handheld Computer Auto Adapter (p/n: 852-057-003) allows
you to power your CK60 Handheld Computer from your vehicle’s electrical
system.
1 Attach the Auto Adapter to the docking connector of your CK60 Handheld
Computer.
2 Connect the Auto Adapter to your vehicle’s cigarette lighter jack/power port.
The LED on the Adapter illuminates green when power is applied to your CK60.
Should the LED not illuminate:
1 Check that the lighter/power port is receiving power from the vehicle.
2 Check the fuse in the Auto Adapter. Unscrew the power tip to inspect the fuse. If
a replacement is needed, use a 5A 12V fuse.
The input voltage range on the Auto Adapter is 10-14 Volts DC.
The Intermec CK60 Handheld Computer Auto Adapter (p/n: 852-057-003) allows
you to power your CK60 Handheld Computer from your vehicle’s electrical
system.
1 Attach the Auto Adapter to the docking connector of your CK60 Handheld
Computer.
2 Connect the Auto Adapter to your vehicle’s cigarette lighter jack/power port.
The LED on the Adapter illuminates green when power is applied to your CK60.
Should the LED not illuminate:
1 Check that the lighter/power port is receiving power from the vehicle.
2 Check the fuse in the Auto Adapter. Unscrew the power tip to inspect the fuse. If
a replacement is needed, use a 5A 12V fuse.
The input voltage range on the Auto Adapter is 10-14 Volts DC.
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
CK60 Handheld Computer Auto Adapter Instructions
*962-000-058A*
P/N 962-000-058A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
CK60 Handheld Computer Auto Adapter Instructions
*962-000-058A*
P/N 962-000-058A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
CK60 Handheld Computer Auto Adapter Instructions
*
962-000-058A*
P/N 962-000-058A
CK60 Handheld Computer Auto Adapter CK60 Handheld Computer Auto Adapter CK60 Handheld Computer Auto Adapter
Instructions
Auto Adapter handheld
Auto Adapter
CK60 Handheld Computer
docking connector
connector cable
Operation status LED
(Green when working)
Power tip
fuse compartment
Instructions
Auto Adapter handheld
Auto Adapter
CK60 Handheld Computer
docking connector
connector cable
Operation status LED
(Green when working)
Power tip
fuse compartment
Instructions
Auto Adapter handheld
Auto Adapter
CK60 Handheld Computer
docking connector
connector cable
Operation status LED
(Green when working)
Power tip
fuse compartment
/