2. Intermec
  3. 710
710

Intermec 710, CK60 Ethernet Multidock Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Intermec 710 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Intermec CK60 Ethernet Multidock?
    What are the major components of the Intermec CK60 Ethernet Multidock?
    What type of Ethernet connection does the Intermec CK60 Ethernet Multidock support?
    What is the power supply requirement for the Intermec CK60 Ethernet Multidock?
    How many CK60 mobile computers can be docked to the Intermec CK60 Ethernet Multidock?
    What type of docking connector does the Intermec CK60 Ethernet Multidock use?
    What are the dimensions of the Intermec CK60 Ethernet Multidock?
    What is the weight of the Intermec CK60 Ethernet Multidock?
The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*962-000-055A*
P/N 962-000-055A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*962-000-055A*
P/N 962-000-055A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*
962-000-055A*
P/N 962-000-055A
CK60 Handheld Computer Bumpers
CK60 Handheld Computer Bumpers CK60 Handheld Computer Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
/