Tyan S7082 User manual

http://www.tyan.com

1

S7082

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

Contents

S7082 ............................................................................................................ 1

Before you begin… .................................................................................... 3

Chapter 1: Instruction ................................................................................ 4

1.1 Congratulations ................................................................................. 4

1.2 Hardware Specifications .................................................................... 4

1.3 Software Specifications ..................................................................... 8

Chapter 2: Board Installation ..................................................................... 9

2.1 Board Image .................................................................................... 10

2.2 Block Diagram ................................................................................. 11

2.3 Motherboard Mechanical Drawing ................................................... 12

2.4 Board Parts, Jumpers and Connectors ........................................... 13

2.5 Installing the Processor and Heatsink ............................................. 20

2.6 Thermal Interface Material............................................................... 24

2.7 Tips on Installing Motherboard in Chassis ...................................... 25

2.8 Installing the Memory ...................................................................... 27

2.9 Attaching Drive Cables .................................................................... 32

2.10 Installing Add-In Cards .................................................................. 33

2.11 Connecting External Devices ........................................................ 34

2.12 Installing the Power Supply ........................................................... 35

2.13 Finishing Up ................................................................................... 36

Chapter 3: BIOS Setup ............................................................................. 37

3.1 About the BIOS ................................................................................ 37

3.2 Main Menu ....................................................................................... 39

3.3 Advanced Menu ............................................................................... 40

3.4 Intel RCSetup Menu ........................................................................ 67

3.5 Server Management ........................................................................ 98

3.6 Security .......................................................................................... 101

3.7 Boot ............................................................................................... 106

3.8 Save & Exit .................................................................................... 108

Chapter 4: Diagnostics ........................................................................... 110

4.1 Flash Utility .................................................................................... 110

4.2 AMIBIOS Post Code (Aptio) .......................................................... 111

Appendix I: Fan and Temp Sensors ..................................................... 118

Glossary ................................................................................................... 123

Technical Support .................................................................................. 129

http://www.tyan.com

3

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S7082 Motherboard

2 x SATA Single Cable

1 x Rear IO shielding

1 x S7082 Quick Installation Guide

1 x TYAN

®

Driver CD

IMPORTANT NOTE:

Sales samples may not come with any of the accessories listed above.

If you have ordered a sales sample and you are missing any of the above items,

please contact your sales representative to help order accessories.

http://www.tyan.com

4

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S7082 motherboard, based on the Intel

®

C612 Wellsburg chipset. The S7082 is designed to support dual Intel

®

Xeon E5-

2600 v3 (Haswell-EP) Series processors, and Up to 64GB RDIMM/ 128GB

LRDIMM/ 256GB LRDIMM 3DS* DDR4 memory for each DIMM slot. Leveraging

advanced technology from Intel

®

, the S7082 is capable of offering scalable 32 and

64-bit computing, high-bandwidth memory design, and lightning-fast PCI-E bus

implementation.

The S7082 not only empowers you in today‟s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provide the S7082 with the power and flexibility to meet demanding

requirements for today‟s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can find

all the information on all TYAN

®

products as well as all the supporting documentation,

FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

TYAN S7082 (S7082GM2NR)

Processor

Supported CPU

Series

Intel Xeon Processor E5-2600 v3 series

processors

Socket Type / Q'ty

LGA2011 / (2)

Thermal Design

Power (TDP) wattage

Max up to 145W

System Bus

Up to 9.6/ 8.0/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset

PCH

Intel C612

Memory

Supported DIMM Qty

(12)+(12) DIMM slots

DIMM Type / Speed

RDIMM DDR4 2133/1866/1600 / LRDIMM DDR4

2133/1600 / LRDIMM 3DS DDR4 2133/1600

Capacity

Up to 768GB RDIMM/ 1,536GB LRDIMM/

3,072GB LRDIMM 3DS *Follow latest Intel

DDR4 Memory POR

Memory channel

4 Channels per CPU

Memory voltage

1.2V

Expansion Slots

PCI-E

(1) PCI-E Gen3 x16 slot / (3) PCI-E Gen3 x8

slots

Note:

(1) PCI-E Gen3 x 8 slot for Mezz Card

http://www.tyan.com

5

Recommended TYAN

Mezzanine Card

M7094-8074-8I, PCI-E Gen3 x8, PMC SAS 12G

Mezz Card

Recommended TYAN

OCP Card

M7076-3108-8I, PCI-E Gen3 x8, LSI SAS 12G

Mezz Card / M7094-2308G-8I, PCI-E Gen3 x8,

LSI SAS 6G Mezz Card / M7076-3008-8I, PCI-E

Gen3 x8, LSI SAS 12G Mezz Card

Recommended

Barebone /

Chassis

Mechanical

Compliant

KFT48

LAN

Port Q'ty

(2) GbE ports (1 port shared with IPMI)

Controller

Intel I350-AM2

Storage

sSATA

Connector

(1) Mini-SAS (4-ports)

Controller

Intel C612

Speed

6.0 Gb/s

RAID

RAID 0/1/10/5 (Intel RST) only for 4 SATA

devices

SATA

Connector

(1) Mini-SAS (4-ports) + (2) SATA (totally

support 6 ports)

Controller

Intel C612

Speed

6.0 Gb/s

RAID

RAID 0/1/10/5 (Intel RST)

Graphic

Connector type

D-Sub 15-pin

Resolution

Up to 1920x1200

Chipset

Aspeed AST2400

Input /Output

USB

(4) USB3.0 ports (2 at rear, 2 via cable) / (1)

Type-A USB3.0 port

COM

(2) ports (1 at rear, 1 via cable)

VGA

(1) D-Sub 15-pin VGA port

RJ-45

Total (2) GbE ports, (1) shared with IPMI

Power

SSI 24-pin + 8-pin + 8-pin + 4-pin power

connectors

PSMI

(1) 1x5-pin header

SATA

(2) SATA-III connectors + (2) Mini-SAS (4-in-1)

connectors

System Monitoring

Chipset

Aspeed AST2400

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Temperature

Monitors temperature for CPU & system

environment

LED

Over temperature warning indicator / Fan & PSU

fail LED indicator

Others

Watchdog timer support

Server

Management

Onboard Chipset

Onboard Aspeed AST2400

AST2400 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

http://www.tyan.com

6

remote platform-flash / USB 2.0 virtual hub

AST2400 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

BIOS

Brand / ROM size

AMI / 16MB

Feature

User-configurable H/W monitoring / SMBIOS

2.7/PnP/Wake on LAN / PXE boot support /

ACPI 3.0/ACPI sleeping states S4,S5

Physical

Dimension

Form Factor

SSI EEB

Board Dimension

12"x13" (305x330mm)

Operating System

OS supported list

Please refer to our Intel OS supported list.

Regulation

FCC (DoC)

Class A

CE (DoC)

Yes

Operating

Environment

Operating Temp.

10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6 Compliant

Yes

Package Contains

Motherboard

(1) S7082 Motherboard

Manual

(1) Quick Installation Guide

Installation CD

(1) TYAN installation CD

TYAN S7082 (S7082GM4NR)

Processor

Supported CPU

Series

Intel Xeon Processor E5-2600 v3 series

processors

Socket Type / Q'ty

LGA2011 / (2)

Thermal Design

Power (TDP) wattage

Max up to 145W

System Bus

Up to 9.6/ 8.0/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset

PCH

Intel C612

Memory

Supported DIMM Qty

(12)+(12) DIMM slots

DIMM Type / Speed

RDIMM DDR4 2133/1866/1600 / LRDIMM DDR4

2133/1600 / LRDIMM 3DS DDR4 2133/1600

Capacity

Up to 768GB RDIMM/ 1,536GB LRDIMM/

3,072GB LRDIMM 3DS *Follow latest Intel

DDR4 Memory POR

Memory channel

4 Channels per CPU

Memory voltage

1.2V

Expansion Slots

PCI-E

(1) PCI-E Gen3 x16 slot / (3) PCI-E Gen3 x8

slots

Note:

(1) PCI-E Gen3 x8 slot for Mezz Card

Recommended TYAN

Mezzanine Card

M7094-8074-8I, PCI-E Gen3 x8, PMC SAS 12G

Mezz Card

Recommended TYAN

OCP Card

M7076-3108-8I, PCI-E Gen3 x8, LSI SAS 12G

Mezz Card / M7094-2308G-8I, PCI-E Gen3 x8,

http://www.tyan.com

7

LSI SAS 6G Mezz Card / M7076-3008-8I, PCI-E

Gen3 x8, LSI SAS 12G Mezz Card

Recommended

Barebone /

Chassis

Mechanical

Compliant

KFT48

LAN

Port Q'ty

Total (4) ports, (1) shared with IPMI

Controller

Intel I350-AM4

Storage

sSATA

Connector

(1) Mini-SAS (4-ports)

Controller

Intel C612

Speed

6.0 Gb/s

RAID

RAID 0/1/10/5 (Intel RST) only for 4 SATA

devices

SATA

Connector

(1) Mini-SAS (4-ports) + (2) SATA (totally

support 6 ports)

Controller

Intel C612

Speed

6.0 Gb/s

RAID

RAID 0/1/10/5 (Intel RST)

Graphic

Connector type

D-Sub 15-pin

Resolution

Up to 1920x1200

Chipset

Aspeed AST2400

Input /Output

USB

(4) USB3.0 ports (2 at rear, 2 via cable) / (1)

Type-A USB3.0 port

COM

(2) ports (1 at rear, 1 via cable)

VGA

(1) D-Sub 15-pin VGA port

RJ-45

Total (4) GbE ports, (1) shared with IPMI

Power

SSI 24-pin + 8-pin + 8-pin + 4-pin power

connectors

PSMI

(1) 1x5-pin header

SATA

(2) SATA-III connectors + (2) Mini-SAS (4-in-1)

connectors

System Monitoring

Chipset

Aspeed AST2400

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Temperature

Monitors temperature for CPU & system

environment

LED

Over temperature warning indicator / Fan & PSU

fail LED indicator

Others

Watchdog timer support

Server

Management

Onboard Chipset

Onboard Aspeed AST2400

AST2400 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

AST2400 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

http://www.tyan.com

8

BIOS

Brand / ROM size

AMI / 16MB

Feature

User-configurable H/W monitoring / SMBIOS

2.7/PnP/Wake on LAN / PXE boot support /

ACPI 3.0/ACPI sleeping states S4,S5

Physical

Dimension

Form Factor

SSI EEB

Board Dimension

12"x13" (305x330mm)

Operating System

OS supported list

Please refer to our Intel OS supported list.

Regulation

FCC (DoC)

Class A

CE (DoC)

Yes

Operating

Environment

Operating Temp.

10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6 Compliant

Yes

Package Contains

Motherboard

(1) S7082 Motherboard

Manual

(1) Quick Installation Guide

Installation CD

(1) TYAN installation CD

1.3 Software Specifications

For the latest AST2400 User‟s Guide and OS (operation system) support, please

visit the Tyan‟s Web site at http://www.tyan.com for the latest information

http://www.tyan.com

9

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is read this user‟s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than

7kgf/cm (6.09 lb/in) on each mounting screw for

motherboard installation.

2. Do not apply power to the board if it has been

damaged.

http://www.tyan.com

10

2.1 Board Image

S7082

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

11

2.2 Block Diagram

S7082 Block Diagram

http://www.tyan.com

12

2.3 Motherboard Mechanical Drawing

http://www.tyan.com

13

2.4 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. The

DIMM slot numbers shown above can be used as a reference when reviewing the

DIMM population guidelines shown later in the manual. For the latest board revision,

please visit our web site at http://www.tyan.com.

http://www.tyan.com

14

Motherboard Components

Connectors

1. COM Port

20. DOM_PWR1

2. VGA Port

21. PCH_SATA2(SATA DOM1)

3. 8-pin Power Connector(PW3)

22. Clear Button(Clear_BTN1)

4. LAN port#4 (IPMI) and USB 3.0 ports

23. Power Button(PWR BTN1)

5. LAN Port#2(LAN2)&LAN Port#3(LAN3)

24. 4-in-1 Mini SAS Connector(SATA0,1,4,5)

6. LAN Port#0(LAN0)&LAN Port#1 (LAN1)

25.Front Fan Connector (FAN_HD1)

7. ID Button(SW2)

26. Micro SD Card Connector

8. ID LED

27. COM2 Header

9. 4-pin Fan Connector(CPU1_FAN)

28. TYAN Module Header

10. 4-pin Fan Connector(SYS_FAN5)

29.Front Panel Connector(FPIO)

11. 4-pin Fan Connector(SYS_FAN4)

30. RJ45 LED header(LED_HD1)

12. 4-pin Power Connector(PW4)

31. 8-pin Power Connector(PW2)

13. IPMB Connector(IPMB1)

32. 4-pin Fan Connector (CPU0_FAN)

14. USB 3.0 Header(USB3_HD1)

33. 4-pin Fan Connector (SYS_FAN3)

15. VGA2 Header

34. 4-pin Fan Connector(SYS_FAN2)

16. DOM_PWR2

35. 4-pin Fan Connector(SYS_FAN1)

17. Vertical (Type_A) USB3.0 Connector

(TYPEA_USB3)

36. 24-pin Power Connector(PW1)

18. PCH_SATA3(SATA DOM2)

37. PSMI Connector(PSMI_HD1)

19. 4-in-1 Mini SAS Connector (SSATA0-3)

Headers/Jumpers

a. ME Recovery Mode Jumper (3PHD_7)

d. ID_LED Button Header (2PHD_2)

b. Chassis Intrusion Header (2PHD_1)

e. PSU Alert Disable Jumper (3PHD_10)

c. System Reset Jumper (3PHD_1)

f. CPU Power FW Update Header(3PHD_6)

g. BUZZER Disable Jumper(4PHD_1)

Slots

A.Slot #5: PCI-E G3 x8 slot (x8 link)

(f/ CPU0)

F. CPU0 DIMM A/B

B. Slot #4: PCI-E G3 x16 slot (x16 link) (f/CPU0)

G.CPU0 DIMM D/C

C.Slot #3: PCI-E G3 x8 slot (x8 link)

(f/ CPU1,open-type)

H. CPU1 DIMM C/D

D.Slot #2: PCI-E G3 x8 slot (x8 link)

(f/ CPU1,open-type)

I. CPU1 DIMM B/A

E. Slot #Mezz: PCI-E G3 x8 slot (x8 link) (f/ CPU0)

http://www.tyan.com

15

SYS_FAN1/2/3/4/5/CPU0/1_FAN: 4-Pin FAN Connector

1

2

3

4

Signal

GND

+12V

FAN_TACH

FAN_PWM

Use this header to connect the cooling fan to your motherboard to keep the

system stable and reliable.

Note: A 4-pin fan is required for fan speed control.

FPIO: Front Panel Connector

Signal

PWRLED+

1

2

V3P3_AUX

KEY

3

4

ID_LED+

PWRLED-

5

6

ID_LED-

HDDLED+

7

8

HWM_FAULT_LED-

HDDLED-

9

10

SYS_FAULT_LED-

PWR_SW#

11

12

LAN0_ACTLE+

GND

13

14

LAN0_ACTLED-

RST_SW#

15

16

SMBDATA

GND

17

18

SMBCLK

FP_IDLED_BTN_N

19

20

INTRUSION#

FPIO_TEMP_IN

21

22

LAN1_ACTLED+

NMI_SW#

23

24

LAN1_ACTLED-

PSMI_HD1: PSMI Connector

1

2

3

4

5

Signal

SMB_CLK

SMB_DAT

SMB_ALERT#

GND

V3P3

USB3_HD1: Front USB3.0 Header

Signal

+5V

1

2

P0_RX_N

P0_RX_P

3

4

GND

P0_TX_N

5

6

P0_TX_P

GND

7

8

P0_N

P0_P

9

10

OC_N

P1_P

11

12

P1_N

GND

13

14

P1_TX_P

P1_TX_N

15

16

GND

P1_RX_P

17

18

P1_RX_N

+5V

19

20

Key

http://www.tyan.com

16

TYPEA_USB3: Vertical (Type_A) USB3.0 Connector

Signal

+5V

1

2

USB2.0_DATA_N

USB2.0_DATA_P

3

4

GND

USB3.0_RX_N

5

6

USB3.0_RX_P

GND

7

8

USB3.0_TX_N

USB3.0_TX_P

9

FAN_HD1: Front Fan Connector (Reserved for Barebone)

Signal

TACH1

1

2

TACH6

TACH2

3

4

TACH7

TACH3

5

6

TACH8

TACH4

7

8

TACH9

TACH5

9

10

TACH10

GND

11

12

KEY

PWM2

13

14

PWM1

TACH11

15

16

SMB_DATA

TACH12

17

18

SMB_CLK

VCC3_AUX

19

20

PWM3

SATA DOM1/2: 7-pin vertical SATA3.0 Connector(White)

7

1

Name

TYPE

Description

S1

GND

Gound

S2

TX+

+Different Tranmit Signal

S3

TX-

-Different Transmit Signal

S4

GND

Gound

S5

RX-

-Differential Transmit Signal

S6

RX+

+Differential Transmit Signal

S7

GND

Gound

P1

Power

Vcc

P2

GND

DOM_PWR1/ DOM_PWR2:SATA DOM Power Connector

1

Signal

GND

1

2

VCC5

LED_HD1: RJ45 LED Header

1

Signal

LAN2_Link_P

1

2

LAN2_ACT_N

LAN3_Link_P

3

4

LAN3_ACT_N

http://www.tyan.com

17

DBG_HD1: TYAN Module Header

Signal

P3V3

1

2

FRAME_N

LAD0

3

4

KEY

LAD1

5

6

PLT_RST_N

LAD2

7

8

GND

LAD3

9

10

CLK_33M

DBG_SERIRQ

11

12

GND

DBG_PRES_N

13

14

VCC3_AUX

ADDR_MB

15

16

PCH_PP_EN

VGA2 Header: VGA Header

Signal

GND

1

2

VGA2_5V

GND

3

4

VGA_R

GND

5

6

VGA_G

GND

7

8

VGA_B

GND

9

10

VGA_DAT

VGA_HS

11

12

Key

VGA_CLK

13

14

VGA_VS

COM2: COM Header

Signal

DCD

1

2

DSR

SIN

3

4

RTS

SOUT

5

6

CTS

DTR

7

8

RI

GND

9

10

KEY

IPMB_HD1: IPMB Connector

Signal

BMC_SMB_DATA

1

2

GND

BMC_SMB_CLK

3

4

NC

Caution:

The jumpers are only using for engineering debug. We don‟t

suggest customers change the jumpers‟ position, which may

cause unable to boot device.

http://www.tyan.com

18

INTRUDER_HD1: Chassis Intrusion Header

Open

Short (Default)

1

2

Signal

INTRUDER#

GND

Open: Use this header to trigger the system chassis

intrusion alarm.

Short: Use this header to disable the system chassis

intrusion alarm.

2PHD_2: ID LED Button Header

1

2

Signal

FP_IDLED_BTN_N

GND

3PHD_1: System Reset Jumper

1

2

3

Signal

FP_RST_BT

N_N

FP_RST_BTN_R_

N

FP_BMC_RST_

BTN_N

Pin 1-2 Closed: Normal Mode (Default)

Pin 2-3 Closed: BMC Reset Mode

3PHD_6: CPU Power FW Update Header

1

2

3

Signal

IR_VR_3V3_

SMB_CLK

IR_VR_3V3_SMB

_DAT

GND

3PHD_7: ME Recovery Mode Jumper

1

2

3

Signal

NC

FM_ME_RCVR_N

GND

Pin 1-2 Closed: Normal Mode (Default)

Pin 2-3 Closed: ME Recovery Mode

http://www.tyan.com

19

3PHD_10: PSU Alert Disable Jumper

1

2

3

Signal

PSU_SMB_AL

ERT_BMC_N

PSU_SMB_ALERT

_BMC_N_R

NC

Pin 1-2 Closed: Normal Mode (Default)

Pin 2-3 Closed: Disable PSU Alert

4PHD_1: BUZZER Disable Jumper

1

2

3

4

Signal

VCC5

NA

BUZ_1

BUZ_2

Pin 3-4 Closed: Normal Mode (Default)

Pin 2-3 Closed: Disable PC Beep

Pin 1-4 Closed: Use the External Speaker

SW2: ID LED Switch Button

Signal

FP_IDLED_BTN_N

1

2

GND

Clear_BTN1: Clear CMOS Reset Button

You can reset the CMOS settings by using this button, if you have

forgotten your system/setup password or need to clear system BIOS

setting.

1. Power off the system and disconnect power connectors from the

motherboard.

2. Press the button (Clear CMOS).

3. Reconnect power & power on the system.

NOTE: After flashing new BIOS, do the following steps:

a. Clear CMOS

b. Enter BIOS setup menu and load Default Settings. Then do a Save

and Exit from setup.

ID LED: ID LED

LED1

Rear

ID_LED

Signal

+

P3V3_AUX

-

ID_SW_L

State

Color

Description

On

Blue

System identified

Off

System not identified

NOTE: The ID LED can be activated remotely using IPMI.

Please visit the TYAN Web Site at http://www.tyan.com to

download the latest IPMI Configuration Guide for more details.

http://www.tyan.com

20

2.5 Installing the Processor and Heatsink

The types of processors supported by the S7082 are listed in the 1.2 Hardware

Specifications section on page 4. Check our website at http://www.tyan.com for

the latest list of validated Intel

®

processors for this specific motherboard.

NOTE: MiTAC is not liable for damage as a result of operating an

unsupported configuration.

Processor Installation (Socket R3 for Intel Haswell CPU)

Follow the steps described later to install the processors and heat sinks.

The following pictures illustrate how to install the Intel

®

Haswell-EP processor on

the Socket R3. Please note that the motherboard may not look exactly like the one

you purchased. Therefore, the illustrations should be held for your reference only.

NOTE: Please save and replace the CPU protection cap when returning for service.

1. Locate the CPU socket.

2. Open the one side socket lever.

3. Open the other side of the lever.

Page is loading ...

Tyan S7082 User manual

Tyan S7082 User manual

Related papers

Other documents