Gigabyte MD30-RS0 User manual

MD30-RS0

Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3/V4 series processors

User's Manual

Rev. 1002

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

 For detailed product information, carefully read the User's Manual.

For more information, visit our website at:

http://b2b.gigabyte.com

You are a professional?

Get an access to our complete source of sales, marketing & technical materials at:

http://reseller.b2b.gigabyte.com

https://www.facebook.com/gigabyteserver

- 3 -

Table of Contents

Box Contents ...................................................................................................................5

MD30-RS0 Motherboard Layout ......................................................................................6

Block Diagram .................................................................................................................9

Chapter 1 Hardware Installation ...................................................................................10

1-1 Installation Precautions .................................................................................. 10

1-2 ProductSpecications .................................................................................... 11

1-3 Installing the CPU and CPU Cooler ............................................................... 13

1-3-1 Installing the CPU ...................................................................................................13

1-3-2 Installing the CPU Cooler .......................................................................................16

1-4 Installing the Memory ..................................................................................... 17

1-4-1 FourChannelMemoryConguration .....................................................................17

1-4-2 Installing a Memory ...............................................................................................18

1-4-3 DIMM Population Table .........................................................................................18

1-5 Back Panel Connectors .................................................................................. 19

1-6 Internal Connectors ........................................................................................ 20

1-7 Jumper Settings ............................................................................................. 31

Chapter 2 BIOS Setup ..................................................................................................36

2-1 The Main Menu .............................................................................................. 38

2-2 Advanced Menu ............................................................................................. 41

2-2-1 Serial Port Console Redirection .............................................................................42

2-2-2 PCI Subsystem Settings .........................................................................................46

2-2-2-1 PCI Express Settings ..............................................................................................48

2-2-3 Network Stack ........................................................................................................50

2-2-4 CSMConguration .................................................................................................51

2-2-5 PostReportConguration ......................................................................................53

2-2-6 Trusted Computing .................................................................................................54

2-2-7 USBConguration ..................................................................................................55

2-2-8 ChipsetConguration .............................................................................................56

2-9 SIOConguration ...................................................................................................57

2-2-10 iSCSIConguration ................................................................................................61

2-3 Intel RC Setup Menu ...................................................................................... 62

2-3-1 ProcessorConguration .........................................................................................63

2-3-1-1 Pre-SocketConguration .......................................................................................66

2-3-2 AdvancedPowerManagementConguration ........................................................68

2-3-2-1 CPU P State Control ...............................................................................................69

2-3-2-2 CPU C State Control ..............................................................................................70

- 4 -

2-3-2-3 CPU T State Control ...............................................................................................71

2-3-3 CommonRefCodeConguration ...........................................................................72

2-3-4 QPIConguration ...................................................................................................73

2-3-5 MemoryConguration ............................................................................................75

2-3-5-1 Memory Topology ...................................................................................................77

2-3-5-2 Memory Thermal ....................................................................................................78

2-3-5-3 Memory Map ...........................................................................................................79

2-3-5-4 MemoryRASConguration ....................................................................................80

2-3-6 IIOConguration ....................................................................................................81

2-3-6-1 IOATConguration .................................................................................................82

2-3-6-2 Intel VT for Directed I/O (VT-d) ..............................................................................83

2-3-7 PCHConguration .................................................................................................84

2-3-7-1 PCH Devices ..........................................................................................................85

2-3-7-2 PCHsSATAConguration ......................................................................................86

2-3-7-2-1SATA Mode Options ............................................................................................... 89

2-3-7-3 PCHSATAConguration ........................................................................................91

2-3-7-3-1SATA Mode Options ............................................................................................... 94

2-3-7-4 USBConguration ..................................................................................................96

2-3-8 MiscellaneousConguration ..................................................................................97

2-3-9 ServerMEConguration ........................................................................................98

2-3-10 Runtime Error Logging ...........................................................................................99

2-3-10-1 Whea Setting ........................................................................................................100

2-3-10-2 Memory Error Enabling .........................................................................................101

2-3-10-3 PCI/PCI Error Enabling .........................................................................................102

2-4 Server Management Menu ........................................................................... 103

2-4-1 System Event Log ................................................................................................105

2-4-2 View FRU Information ..........................................................................................106

2-4-3 BMCnetworkconguration ..................................................................................107

2-5 Security Menu .............................................................................................. 108

2-5-1 Secure Boot menu ...............................................................................................109

2-5-1-1 Key Management ...............................................................................................110

2-6 Boot Menu .................................................................................................... 112

2-7 Save & Exit Menu ......................................................................................... 114

2-8 BIOS POST Codes ...................................................................................... 116

2-9 BIOS POST Beep code ................................................................................ 120

2-9-1 PEI Beep Codes ...................................................................................................120

2-9-2 DEX Beep Codes .................................................................................................120

2-10 BIOS Recovery Instruction ........................................................................... 121

Chapter 3 Appendix ....................................................................................................122

3-1 Regulatory Statements ................................................................................. 122

- 5 -

Box Contents

Motherboard

Driver CD

Two SATA 6Gb/s cables

User's Manual

I/O Shield

• The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

• The motherboard image is for reference only.

- 6 -

MD30-RS0 Motherboard Layout

1 2 3 4 5 6 7

8

9

10

11

12

13

16

1718242527

2628

293031

32

33

34

38

39

40

41

42

43

50 51

20

59

4746

21

35 36

37

22

45

48

44 49 52

58

53 54 55

23

19

57

56

14

15

- 7 -

Item Code Description

1 USB2_1 USB 2.0 ports

2 USB3_MLAN1 BMC Management LAN port (top)/USB 3.0 ports

(bottom)

3 LAN1 LAN port #1

4 LAN2 LAN port #2

5 VGA1 VGA port

6 CPU1_FAN CPU1 fan connector (for Secondary CPU)

7 COM1 Serial port

8 P12V_AUX2 8 pin power connector (for secondary CPU)

9 PMBUS PMBus connector

10 ATX1 24 pin main power connector

11 DIMM_P1_G0 Channel 3 slot (for secondary CPU)

12 DIMM_P1_H0 Channel 4 slot (for secondary CPU)

13 CPU1 Intel LGA2011 Socket R3 (Secondary CPU)

14 DIMM_P0_A0 Channel 1 slot (for primary CPU)

15 DIMM_P0_B0 Channel 2 slot (for primary CPU)

16 CPU0 Intel LGA2011 Socket R (Primary CPU)

17 P12V_AUX1 8 pin power connector (for primary CPU)

18 CPU0_FAN CPU0 fan connector (for Primary CPU)

19 DIMM_P0_D0 Channel 4 slot (for primary CPU)

20 DIMM_P0_C0 Channel 3 slot (for primary CPU)

21 SATA_SGP SATA SGPIO header

22 ME_UPDATE ME update jumper

23 SW_RAID Software RAID Key jumper

24 SYS_FAN5 System fan connector#5

25 SYS_FAN4 System fan connector#4

26 SYS_FAN3 System fan connector#3

27 SYS_FAN2 System fan connector#2

28 SYS_FAN1 System fan connector#1

29 FP_1 Front panel header

30 BP_1 HDD back plane board header

31 SATA2 SATA3 6Gb/s connector

32 SATA_DOM0 SATA port 0 DOM support jumper

33 SATA0/1/3/4/5 SATA3 6Gb/s connectors

34 SSATA0/1/2/3 sSATA3 6Gb/s connectors

35 PCH_ME ME recovery jumper

36 SSATA_SGP sSATA SGPIO header

37 TPM TPM module connector

38 CASE_OPEN Case open intrusion alert header

39 RAID_SLOT2 PCI Express x4 slot (Proprietary slot)

40 F_USB3 USB 3.0 header

- 8 -

41 IPMB IPMB connectot

42 COM2 Serial port cable connector

43 RAID_SLOT1 PCI Express x8 slot

44 PCIE_1 PCI Express x1 slot

45 BIOS_PWD Clearing Supervisor Password jumper

46 MINI_CN1 Mini-SAS cable connector#1 supports SATA3 6Gb/s

47 MINI_CN2 Mini-SAS cable connector#2 supports SATA3 6Gb/s

48 BMC_FRB Force to Stop FRB Timer jumper

49 PCIE_2 PCI Express x4 slot

50 BIOS_RVCR BIOS recovery jumper

51 LED_BMC BMCrmwarereadinessLED

52 PCIE_3 PCI Express x8 slot

53 S3_MASK S3 Power On Select jumper

54 PCIE_4 PCI Express x8 slot

55 PCIE_5 PCI Express x8 slot

56 DIMM_P1_F0 Channel 2 slot (for secondary CPU)

57 DIMM_P1_E0 Channel 1 slot (for secondary CPU)

58 CLR_CMOS Clear CMOS jumper

59 BAT Battery socket

CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is

closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please

refer to Page 32 for SATA_DOM0 jumper setting instruction.

- 9 -

Block Diagram

6Gb/s

4 DIMM Slots

Max 2133MT/s

Intel Xeon E5-2600 v3 Series Processor #2

DDR4DDR4DDR4

CPU 1

SOCKET R3 ( LGA2011 )

DDR4

L3 20/15/10/5MBytes

L2 Cache On-die

QPI1 QPI0

1 x DDR4 RDIMM/LRDIMM

Dual/Quad/Six/Eight

Core

Max 2133MT/s

CPU 0

SOCKET R3 ( LGA2011 )

Intel Xeon E5-2600 v3 Series Processor #1

HasWell-EP

QPI1QPI0

L3 20/15/10/5MBytes

L2 Cache On-die

Dual/Quad/Six/Eight

Core

IR VRD 12.5IR VRD 12.5

HasWell-EP

PCI Express

Gen3

PCI Express

Gen3

sserpxE ICP2IMD

Gen3

4x61x8x4x

DMI2 PCI Express

Gen3

x8

ARM9

PCIe Gen3 x 4

Slot 4

DMI2 x4

5GT/s

Ethernet

10/100/1000

ASPEED AST2400

NC-SI

Video

DAC

Ethernet

10/100/1000

RGMII

10/100 Mb / 1Gb

PHY

RealTek

RTL8211E

Analog

Video

10

UART

LPC to

SPI Flash

Bridge

DDR2/3

Memory

Controller

USB

1.1 & 2.0

Graphics

Controller LPC

PCIe x1

x4

DMI2

Intel C612 Chipset

USB 2.0

2 x USB

LPC

USB 3.0

2 x USB

SPI

AHCI

SATA 0-5

DDR4 DDR4 DDR4 DDR4

TPM

x8

6Gb/sSSATA 0-3

Slot 5

PCIe Gen3 x 8

X16

PCIe x 1

SATA1SATA0

128 MB DDR3

VRAM

SPI

USB3_MLAN

x8

PCI Express

Gen2

x1x1x1

Front_USB3

SIO

SATA3SATA2SATA5SATA4

SSATA

SSATA1SSATA0 SSATA3SSATA2

Slot 3

Slot 2

Slot 1

PCIe Gen2 x 4

PCIe Gen2 x 1

PCIe x 8

PCIe Gen3 x 8

ITE 8772

USB 3.0

1A~BD~A2B~A1

4 DIMM Slots

J321 J321

USB 2.0

USB2

3A~D

x4

RAID CARD

x4

2A~D

PCI Express

Gen3

3A~D

PCI Express

Gen3

x8x8

1 x DDR4 RDIMM/LRDIMM

PCI Express x8 Slot

PCI Express x4 Slot

PCI Express x1 Slot

Hardware Installation - 10 -

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

- 11 - Hardware Installation

1-2 Product Specications

CPU Support for Intel® Xeon® E5-2600 V3/V4 series processors in the LGA2011

package

L3 cache varies with CPU

Supports Dual QuickPath Interconnect up to 9.6GT/s

Enhanced Intel SpeedStep Technology (EIST)

Support Intel Virtualization Technology (VT)

Chipset Intel® C612 Express (Wellsburg) Chipset

Memory 8 x DIMM slots

DDR4 memory supported only

Quad channel memory architecture

ECC RDIMM / LRDIMM modules supported

Single and dual rank RDIMM modules up to 32GB supported

3DS LRDIMM modules up to 128GB supported

1.2V modules: 1600/1866/2133/2400 MHz

LAN 2 x Intel® I210 supports GbE LAN ports

1 x Management LAN 10/100/1000Mpbs LAN port

Expansion Slots 2 x PCI Express x8 slot, running at x8 (Gen3/PCIE_3/PCIE_5)

 1 x PCI Express x8 slot, running at x4 (Gen3/PCIE_4)

 1 x PCI Express x4 slot, running at x4 (Gen2/PCIE_2)

1 x PCI Express x1 slot, running at x1 (Gen2/PCIE_1)

1 x PCI Express mezzanine type T, running at x8 (Gen3/RAID_SLOT1&2)

Onboard

Graphics ASPEED® AST2400 supports 16MB DDR3 VRAM

Storage Interface Intel® C612 Express controller

10 x SATA3 6Gb/s connectors (SATA0/SATA1/SATA2/SATA3/SATA4/SATA5/

SSATA0/SSATA1/SSATA2/SSATA3)

8 x SAS 6Gb/s connectors (SAS0/SAS1/SAS2/SAS3/SAS4/SAS5/SAS6/SAS7)

Activating SAS ports with Gigabyte extension card

Support for Intel RSTe SATA RAID 0/1/5/10

USB

Up to 4 USB 3.0 ports (2 on the back panel, 2 additional ports via the USB

brackets connected to the internal USB headers)

2 x USB 2.0 ports (back panel)

Hardware Installation - 12 -

Internal

Connectors

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connector

2 x Mini-SAS connectors

10 x SATA3 6Gb/s connectors

1 x PMBus header

2 x CPU fan headers

5 x System fan headers

1 x Front panel header

1 x HDD Back plane borad header

1 x USB 3.0 header

1 x TPM module connector

1 x Serial port connector

2 x SATA SPGIO headers

1 x Software RAID key connector

1 x IPMB connector

Rear Panel I/O 2 x USB 3.0 ports

2 x USB 2.0 ports

3 x RJ-45 ports (1 x 10/100/1000 Mbps dedicated management LAN port)

1 x COM port

1 x VGA port

I/O Controller ASPEED® AST2400 BMC chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU/System fan speed control

* Whether the CPU/system fan speed control function is supported will depend on

the CPU/system cooler you install.

BIOS 1x128Mbitash

AMI BIOS

Form Factor ATX Form Factor; 12 inch x 10 inch

*GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

- 13 - Hardware Installation

1-3 Installing the CPU and CPU Cooler

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

• Apply an even and thin layer of thermal grease on the surface of the CPU.

• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and

damage of the CPU may occur.

• SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specifications, please do so according to your hardware specifications including the CPU,

graphics card, memory, hard drive, etc.

Pin One Corner

of the CPU Socket

LGA2011 CPU

Triangle Pin One Marking on the CPU

Alignment Key

Notch

Hardware Installation - 14 -

Step 1:

Push the lever closest to the "unlock" marking " "

(below referred as lever A) down and away from

the socket to release it.

Step 4:

HoldtheCPUwithyourthumbandindexngers.Align

the CPU pin one marking (triangle) with the pin one

corner of the CPU socket (or align the CPU notches with

the socket alignment keys) and carefully insert the CPU

into the socket vertically.

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

•Before installing the CPU, make sure to turn off the computer and unplug the power cord

from the power outlet to prevent damage to the CPU.

•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 2:

Push the lever closest to the "lock" marking " "

(below referred as lever B) down and away from

the socket. Then lift the lever.

Lever B

Lever A

Step 3:

Gently press lever A to allow the load plate to rise.

Open the load plate. (Note: DO NOT touch the socket

contacts after the load plate is opened.)

Hardware Installation - 15 -

Step 5:

Once the CPU is properly inserted, carefully replace the

load plate. Then secure lever B under its retention tab.

The protective plastic cover may pop off from the load

plate during the process of engaging the lever. Remove

the cover. Save the cover properly and always replace it

when the CPU is not installed.

Lever B

Lever A

Step 6:

Finally, secure lever A under its retention tab to

complete the installation of the CPU.

- 16 - Hardware Installation

1-3-2 Installing the CPU Cooler

Refer to the steps below to correctly install the CPU cooler on the motherboard. (Actual installation process

may differ depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.)

Please pay more attention when removing the CPU cooler because the thermal grease/tape

between the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler

may damage the CPU.

Step 1:

Apply an even and thin layer of thermal grease on the

surface of the installed CPU.

Step 2:

Place the cooler atop the CPU, aligning the four

mounting screws with the mounting holes on the

ILM. (If your cooler has a fan grill which may cause

interference when you tighten the screws, remove it

rstandreplaceitaftertighteningthescrews.)

Step 3:

Use one hand to hold the cooler and the other to

tighten the screws in a diagonal sequence with a

screw driver. Begin tightening a screw with a few

turns and repeat with the screw diagonally opposite

the one you just tightened. Then do the same to the

other pair. Next, fully tighten the four screws.

Step 4:

Finally, attach the power connector of the CPU

cooler to the CPU fan header (CPU_FAN) on the

motherboard.

Hardware Installation - 17 -

1-4-1 Four Channel Memory Conguration

This motherboard provides Eight DDR4 memory sockets and supports Four Channel Technology. After

thememory is installed, theBIOS will automatically detect the specications andcapacity of the memory.

Enabling Four Channel memory mode will be four times of the original memory bandwidth.

The four DDR4 memory sockets are divided into four channels each channel has two memory sockets as

following:

Channel 1: DIMM_P0_A0 (For pimary CPU)/DIMM_P1_E0 (For secondary CPU)

Channel 2: DIMM_P0_B0 (For pimary CPU)/DIMM_P1_F0 (For secondary CPU)

Channel 3: DIMM_P0_C0 (For pimary CPU)/DIMM_P1_G0 (For secondary CPU)

Channel 4: DIMM_P0_D0 (For pimary CPU)/DIMM_P1_H0 (For secondary CPU)

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one

direction. If you are unable to insert the memory, switch the direction.

Due to CPU limitations, read the following guidelines before installing the memory in Four Channel mode.

1. Four Channel mode cannot be enabled if only one DDR4 memory module is installed.

2. When enabling Four Channel mode with two or four memory modules, it is recommended that

memory of the same capacity, brand, speed, and chips be used for optimum performance.

DIMM_P1_H0

DIMM_P1_G0

DIMM_P0_A0

DIMM_P0_B0

DIMM_P0_D0

DIMM_P0_C0

DIMM_P1_E0

DIMM_P1_F0

- 18 - Hardware Installation

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module.

Be sure to install DDR4 DIMMs on this motherboard.

Installation Step:

Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.

Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.

Note: For dual-channel operation, DIMMs must be installed in matched pairs.

Step 3. Reverse the installation steps when you wish to remove the DIMM module.

2

1

1-4-3 DIMM Population Table

Two Slots Channel RDIMM Population Conguration Within a Channel

NOTE!

DDR4 2400MHz is only available on Intel Xeon® E5-2600 V4 processor.

Type

Ranks Per

DIMM and

Data Width

Speed (MT/s);

Slot Per Channel (SPC) and DIMM Per Channel (DPC)

RDIMM

LRDIMM

3DS

SRx4 2133

2133

1866

2133

1 Slot Per Channel

1DPC

2 Slot Per Channel

1DPC 2DPC

SRx8

DRx8

DRx4

QRx4

2400 2400 24008Rx4

Hardware Installation - 19 -

1-5 Back Panel Connectors

Serial Port

Connects to serial-based mouse or data processing devices.

Video Port

The video in port allows connect to video in, which can also apply to video loop thru function.

RJ-45 LAN Ports (Gigabit Ethernet LAN Ports)

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

KVM Server Management 10/100/1000 MbpsLAN Port (Dedicated LAN Port)

The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is

the decated LAN port for server management.

USB 3.0 Port

The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveandetc.

USB 2.0 Port

The USB port supports the USB 2.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveandetc.

Link

Activity LED

Speed LED

10/100/1000 LAN Port

Speed LED:

State Description

Yellow On 1 Gbps data rate

Green On 100 Mbps data rate

Off 10 Mbps data rate

Link/Activity LED:

State Description

On Link bet ween system and net work or no

access

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

Hardware Installation - 20 -

1-6 Internal Connectors

1) ATX1

2) P12V_AUX1

3) P12V_AUX2

4) PMBUS

5) CPU0_FAN (for primary CPU)

6) CPU1_FAN (for seconary CPU)

7) SYS_FAN1 (System Fan)

8) SYS_FAN2 (System Fan)

9) SYS_FAN3 (System Fan)

10) SYS_FAN4 (System Fan)

11) SYS_FAN5 (System Fan)

12) SATA2

13) SATA0/1/3/4/5

14) SSATA0/SSATA1/SSATA2/SSATA3

15) SSATA_SGP

16) SATA_SGP

17) MINI_CN1

18) MINI_CN2

19) F_USB3

20) COM2

21) TPM

22) IPMB

23) FP_1

24) BP_1

25) SW_RAID

26) LED_BMC

27) CASE_OPEN

28) BAT

1

2

3

4

5

6

9

10 11

13

12

14

27

19

22

2324

20

26

28

1817

16

15

21

25

7 8

Read the following guidelines before connecting external devices:

• First make sure your devices are compliant with the connectors you wish to connect.

• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

• After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

Page is loading ...

Gigabyte MD30-RS0 User manual

Related papers

Other documents