MiTAC Tyan S5542 User manual

http://www.tyan.com

1

S5542

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Nuvoton

®

is a trademark of Nuvoton Technology Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

http://www.tyan.com

3

Contents

Before you begin… .................................................................................... 4

Chapter 1: Instruction ................................................................................ 5

1.1 Congratulations ................................................................................. 5

1.2 Hardware Specifications .................................................................... 5

1.3 Software Specifications ................................................................... 14

Chapter 2: Board Installation ................................................................... 15

2.1 Board Image .................................................................................... 16

2.2 Block Diagram ................................................................................. 17

2.3 Mainboard Mechanical Drawing ...................................................... 18

2.4 Board Parts, Jumpers and Connectors ........................................... 19

2.5 LED Definitions ................................................................................ 26

2.6 Installing the Processor and Heat sink ............................................ 29

2.7 Thermal Interface Material .............................................................. 33

2.8 Tips on Installing Motherboard in Chassis ...................................... 34

2.9 Installing the Memory ...................................................................... 36

2.10 Attaching Drive Cables .................................................................. 39

2.11 Installing Add-In Cards .................................................................. 40

2.12 Connecting External Devices ........................................................ 41

2.13 Installing the Power Supply ........................................................... 42

2.14 Finishing Up ................................................................................... 42

Chapter 3: BIOS Setup ............................................................................. 43

3.1 About the BIOS ................................................................................ 43

3.2 Main Menu ....................................................................................... 45

3.3 Advanced Menu ............................................................................... 46

3.4 Chipset Menu .................................................................................. 72

3.5 Security ............................................................................................ 79

3.6 Server Management ........................................................................ 80

3.7 Boot ................................................................................................. 85

3.8 Save & Exit ...................................................................................... 87

Chapter 4: Diagnostics ............................................................................. 89

4.1 Flash Utility ...................................................................................... 89

4.2 AMIBIOS Post Code (Aptio) ............................................................ 90

Appendix: Fan and Temp Sensors.......................................................... 97

Glossary ................................................................................................... 101

Technical Support .................................................................................. 107

http://www.tyan.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S5542 Motherboard

2 x SATA Cable

1 x Rear IO Shield

1 x S5542 Quick reference guide

1 x TYAN

®

Driver’s and Utilities DVD

IMPORTANT NOTE:

Sales sample may not come with the accessory listed above.

Please contact your sales representative to help order accessory for your

evaluation.

http://www.tyan.com

5

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S5542 motherboard, based on the

Intel

®

C232 chipset. The S5542 is designed to support single Intel

®

Xeon E3-

1200 v5 series processor, and up to 64GB of un-buffered ECC UDIMM DDR4

2133MHz memory. Leveraging advanced technology from Intel

®

, the S5542 is

capable of offering scalable 32 and 64-bit computing, high-bandwidth memory

design, and lightning-fast PCI-E bus implementation.

The S5542 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provides the S5542 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can

find all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

TYAN S5542 (S5542WGM2NR)

Processor

Supported CPU

Series

Intel Xeon E3-1200 v5 series processors

Socket Type / Q'ty LGA1151 / (1)

Thermal Design

Power (TDP)

wattage

Max up to 80W

Chipset PCH Intel C232

Memory

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed Unbuffered ECC UDIMM DDR4 2133

Capacity Up to 64GB

Memory channel 2 Channels

Memory voltage 1.2V

Expansion

Slots

PCI-E

(1) PCI-E Gen.3 x16 slot (w/ x8 link) / (2) PCI-E

Gen.3 x1 slot

LAN

Port Q'ty (2) GbE ports + (1) dedicated for IPMI

Controller Intel I210

PHY

Broadcom BCM5221 PHY (dedicated for IPMI

connection)

Storage SAS Connector (2) Mini-SAS HD connectors (totally support 8 ports)

http://www.tyan.com

6

Controller LSI SAS3008

Speed 12.0 Gb/s

RAID RAID 0/1/1E/10 (LSI Integrated RAID)

SATA

Connector (6) SATA

Controller Intel C232

Speed 6.0 Gb/s

RAID RAID 0/1/10/5 (Intel RST)

Graphic

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Chipset Aspeed AST2400

Input /Output

USB

(3) USB2.0 ports (2 via cable, 1 Type-A) / (6) USB3.0

ports (4 at rear, 2 via cable)

COM (2) ports (1 at rear, 1 via cable)

SAS (2) Mini-SAS HD (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports, (1) Dedicated for IPMI

PSMI (1) 1x5-pin header

Others (1) Reset button/ (1) Power button

SATA (6) SATA-III connectors

System

Monitoring

Chipset Aspeed AST2400

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Fan Total (4) 4-pin headers

Temperature

Monitors temperature for CPU & memory & system

environment

LED

Over temperature warning indicator / Fan & PSU fail

LED indicator

Others Watchdog timer support

Server

Management

Onboard Chipset Onboard Aspeed AST2400

AST2400 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

AST2400 iKVM

Feature

24-bit high quality video compression / 10/100 Mb/s

MAC interface

BIOS

Brand / ROM size AMI / 16MB

Feature

Hardware Monitor / ACPI 5.0 / SMBIOS

3.0/PnP/Wake on LAN / ACPI sleeping states

S3,S4,S5 / Boot from USB device ,PXE via

LAN ,Storage / User Configurable FAN PWM Duty

Cycle / Console Redirection

Physical

Dimension

Form Factor ATX

Board Dimension 12"x9.6" (305x243.8mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

http://www.tyan.com

7

Regulation

FCC (DoC) Class A

CE (DoC) Yes

Operating

Environment

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Package

Contains

Motherboard (1) S5542 Motherboard

Manual (1) Web User's manual / (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

TYAN S5542 (S5542GM2NR)

Processor

Supported CPU

Series

Intel Xeon E3-1200 v5 series processors

Socket Type / Q'ty LGA1151 / (1)

Thermal Design

Power (TDP)

wattage

Max up to 80W

Chipset PCH Intel C232

Memory

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed Unbuffered ECC UDIMM DDR4 2133

Capacity Up to 64GB

Memory channel 2 Channels

Memory voltage 1.2V

Expansion

Slots

PCI-E

(1) PCI-E Gen.3 x16 slot (w/ x8 link) / (1) PCI-E

Gen.3 x8 slot / (2) PCI-E Gen.3 x1 slot

LAN

Port Q'ty (2) GbE ports + (1) dedicated for IPMI

Controller Intel I210

PHY

Broadcom BCM5221 PHY (dedicated for IPMI

connection)

Storage SATA

Connector (6) SATA

Controller Intel C232

Speed 6.0 Gb/s

RAID RAID 0/1/10/5 (Intel RST)

Graphic

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Chipset Aspeed AST2400

Input /Output

USB

(3) USB2.0 ports (2 via cable, 1 Type-A) / (6) USB3.0

ports (4 at rear, 2 via cable)

COM (2) ports (1 at rear, 1 via cable)

http://www.tyan.com

8

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports, (1) Dedicated for IPMI

PSMI (1) 1x5-pin header

Others (1) Reset button/ (1) Power button

SATA (6) SATA-III connectors

System

Monitoring

Chipset Aspeed AST2400

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Fan Total (4) 4-pin headers

Temperature

Monitors temperature for CPU & memory & system

environment

LED

Over temperature warning indicator / Fan & PSU fail

LED indicator

Others Watchdog timer support

Server

Management

Onboard Chipset Onboard Aspeed AST2400

AST2400 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

AST2400 iKVM

Feature

24-bit high quality video compression / 10/100 Mb/s

MAC interface

BIOS

Brand / ROM size AMI / 16MB

Feature

Hardware Monitor / ACPI 5.0 / SMBIOS

3.0/PnP/Wake on LAN / ACPI sleeping states

S3,S4,S5 / Boot from USB device ,PXE via

LAN ,Storage / User Configurable FAN PWM Duty

Cycle / Console Redirection

Physical

Dimension

Form Factor ATX

Board Dimension 12"x9.6" (305x243.8mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

Regulation

FCC (DoC) Class A

CE (DoC) Yes

Operating

Environment

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Package

Contains

Motherboard (1) S5542 Motherboard

Manual (1) Web User's manual / (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

http://www.tyan.com

9

TYAN S5542 (S5542GM4NR)

Processor

Supported CPU

Series

Intel Xeon E3-1200 v5 series processors

Socket Type / Q'ty LGA1151 / (1)

Thermal Design

Power (TDP)

wattage

Max up to 80W

Chipset PCH Intel C232

Memory

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed Unbuffered ECC UDIMM DDR4 2133

Capacity Up to 64GB

Memory channel 2 Channels

Memory voltage 1.2V

Expansion

Slots

PCI-E

(1) PCI-E Gen.3 x16 slot (w/ x8 link) / (1) PCI-E

Gen.3 x8 slot / (2) PCI-E Gen.3 x1 slot

LAN

Port Q'ty (4) ports + (1) dedicated for IPMI

Controller Intel I210

PHY

Broadcom BCM5221 PHY (dedicated for IPMI

connection)

Storage SATA

Connector (6) SATA

Controller Intel C232

Speed 6.0 Gb/s

RAID RAID 0/1/10/5 (Intel RST)

Graphic

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Chipset Aspeed AST2400

Input /Output

USB

(3) USB2.0 ports (2 via cable, 1 Type-A) / (6) USB3.0

ports (4 at rear, 2 via cable)

COM (2) ports (1 at rear, 1 via cable)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (4) GbE ports, (1) Dedicated for IPMI

PSMI (1) 1x5-pin header

Others (1) Reset button/ (1) Power button

SATA (6) SATA-III connectors

System

Monitoring

Chipset Aspeed AST2400

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Fan Total (4) 4-pin headers

Temperature

Monitors temperature for CPU & memory & system

environment

LED

Over temperature warning indicator / Fan & PSU fail

LED indicator

http://www.tyan.com

10

Others Watchdog timer support

Server

Management

Onboard Chipset Onboard Aspeed AST2400

AST2400 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

AST2400 iKVM

Feature

24-bit high quality video compression / 10/100 Mb/s

MAC interface

BIOS

Brand / ROM size AMI / 16MB

Feature

Hardware Monitor / ACPI 5.0 / SMBIOS

3.0/PnP/Wake on LAN / ACPI sleeping states

S3,S4,S5 / Boot from USB device ,PXE via

LAN ,Storage / User Configurable FAN PWM Duty

Cycle / Console Redirection

Physical

Dimension

Form Factor ATX

Board Dimension 12"x9.6" (305x243.8mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

Regulation

FCC (DoC) Class A

CE (DoC) Yes

Operating

Environment

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Package

Contains

Motherboard (1) S5542 Motherboard

Manual (1) Web User's manual / (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

TYAN S5542-UHE (S5542G2NR-UHE)

Processor

Supported CPU

Series

Intel Xeon E3-1200 v5 series processors

Socket Type / Q'ty LGA1151 / (1)

Thermal Design

Power (TDP)

wattage

Max up to 80W

Chipset PCH Intel C236

Memory

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed Unbuffered ECC UDIMM DDR4 2133

Capacity Up to 64GB

Memory channel 2 Channels

Memory voltage 1.2V

http://www.tyan.com

11

Expansion

Slots

PCI-E

(1) PCI-E Gen.3 x16 slot (w/ x8 link) / (1) PCI-E Gen3

x8 slot ( w/ x4 link) / (1) PCI-E Gen.3 x8 slot / (2) PCI-

E Gen.3 x1 slot

LAN

Port Q'ty (2) GbE ports

Controller Intel I210

Storage SATA

Connector (8) SATA

Controller Intel C236

Speed 6.0 Gb/s

RAID RAID 0/1/10/5 (Intel RST)

Graphic

Connector type D-Sub 15-pin

Chipset Intel Processor Graphics(pGFX)

Input /Output

USB

(3) USB2.0 ports (2 via cable, 1 Type-A) / (6) USB3.0

ports (4 at rear, 2 via cable)

COM (2) ports (1 at rear, 1 via cable)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

PSMI (1) 1x5-pin header

Others (1) Reset button/ (1) Power button

SATA (8) SATA-III connectors

System

Monitoring

Chipset Aspeed AST1400

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Fan Total (4) 4-pin headers

Temperature Monitors temperature for CPU & system environment

LED

Over temperature warning indicator / Fan & PSU fail

LED indicator

Others Watchdog timer support

BIOS

Brand / ROM size AMI / 16MB

Feature

Hardware Monitor / ACPI 5.0 / SMBIOS

3.0/PnP/Wake on LAN / ACPI sleeping states

S3,S4,S5 / Boot from USB device ,PXE via

LAN ,Storage / User Configurable FAN PWM Duty

Cycle / Console Redirection

Physical

Dimension

Form Factor ATX

Board Dimension 12"x9.6" (305x243.8mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

Regulation

FCC (DoC) Class A

CE (DoC) Yes

Operating

Environment

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

http://www.tyan.com

12

RoHS RoHS 6/6 Compliant Yes

Package

Contains

Motherboard (1) S5542 Motherboard

Manual (1) Web User's manual / (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

TYAN S5542-UHE (S5542G2NR-UHE-M2)

Processor

Supported CPU

Series

Intel Xeon E3-1200 v5 series processors

Socket Type / Q'ty LGA1151 / (1)

Thermal Design

Power (TDP)

wattage

Max up to 80W

Chipset PCH Intel C236

Memory

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed Unbuffered ECC UDIMM DDR4 2133

Capacity Up to 64GB

Memory channel 2 Channels

Memory voltage 1.2V

Expansion

Slots

PCI-E

(1) PCI-E Gen.3 x16 slot (w/ x8 link) / (1) PCI-E Gen3

x8 slot ( w/ x4 link) / (1) PCI-E Gen.3 x8 slot / (2) PCI-

E Gen.3 x1 slot

LAN

Port Q'ty (2) GbE ports

Controller Intel I210

Storage

M.2 connector (1) M.2 NGFF connector

SATA

Connector (7) SATA

Controller Intel C236

Speed 6.0 Gb/s

RAID RAID 0/1/10/5 (Intel RST)

Graphic

Connector type D-Sub 15-pin

Chipset Intel Processor Graphics(pGFX)

Input /Output

USB

(3) USB2.0 ports (2 via cable, 1 Type-A) / (6) USB3.0

ports (4 at rear, 2 via cable)

COM (2) ports (1 at rear, 1 via cable)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

PSMI (1) 1x5-pin header

Others

(1) Reset button/ (1) Power button/ (1) M.2 NGFF

connector

SATA (7) SATA-III connectors

System

Monitoring

Chipset Aspeed AST1400

Voltage Monitors voltage for CPU, memory, chipset & power

http://www.tyan.com

13

supply

Fan Total (4) 4-pin headers

Temperature Monitors temperature for CPU & system environment

LED

Over temperature warning indicator / Fan & PSU fail

LED indicator

Others Watchdog timer support

BIOS

Brand / ROM size AMI / 16MB

Feature

Hardware Monitor / ACPI 5.0 / SMBIOS

3.0/PnP/Wake on LAN / ACPI sleeping states

S3,S4,S5 / Boot from USB device ,PXE via

LAN ,Storage / User Configurable FAN PWM Duty

Cycle / Console Redirection

Physical

Dimension

Form Factor ATX

Board Dimension 12"x9.6" (305x243.8mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

Regulation

FCC (DoC) Class A

CE (DoC) Yes

Operating

Environment

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Package

Contains

Motherboard (1) S5542 Motherboard

Manual (1) Web User's manual / (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

http://www.tyan.com

14

5 SKU Comparison Table

Part Number

BMC PCH

Expand. slot

SAS

12

Gb/s

SAS

Raid

SATA

6

Gb/s

1G

LAN

USB

3.0

M.2

(NGFF)

X16 / X8 / X4

/ x1

S5542GM2NR Yes C232 1 / 1 / 0 / 2 0

No 6

2 4 0

S5542WGM2NR Yes C232 1 / 0 / 0 / 2 8

Yes 6

2 4 0

S5542GM4NR Yes C232 1 / 1 / 0 / 2 0

No 6

4 4 0

S5542G2NR-

UHE

No C236 1 / 2 / 0 / 2 0

No 8

2 4 0

S5542G2NR-

UHE-M2

No C236 1 / 2 / 0 / 2 0

No 7

2 4 1

1.3 Software Specifications

For OS (operation system) support, please check with TYAN

®

support for latest

information.

http://www.tyan.com

15

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE: Do not apply power to the board if it has been damaged.

http://www.tyan.com

16

2.1 Board Image

S5542

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

17

2.2 Block Diagram

S5542 Block Diagram

http://www.tyan.com

18

2.3 Mainboard Mechanical Drawing

http://www.tyan.com

19

2.4 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. But

for the DIMM number please refer to the above placement for memory installation.

For the latest board revision, please visit our web site at http://www.tyan.com.

http://www.tyan.com

20

Connectors/Slots

1 ID LED Button (ID_BTN)

16 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA6, J40)

2 LAN5 Port / USB Port (USB 3.0)*2 (J2)

17 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA5, J41)

3 VGA Port (D-Sub) / COM Port (RS-232)

(J10)

18 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA4, J42)

4 USB Port (USB 3.0)*2 (J5)

19 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA3, J43)

5 LAN3, LAN4 Port (RJ-45)*2 (J8)

20 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA2, J44)

6 LAN1, LAN2 Port (RJ-45)*2 (J7)

21 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA1, J45)

7 PCI Express Slot (x16 Slot, w/x8 link)

(PCIE1)

22 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA0, J46)

8 PCI Express Slot (x8 Slot, w/x4 link)

(J12)

23 M.2 (SATA 3.0, 6 Gbit/s, NGFF) (U57)

9 PCI Express Slot (x8 Slot, w/x8 link)

(J11)

24 8-Pin CPU Power Suppiy Connector

(PWRCONN1, PW2)

10 PCI Express Slot (x1 Slot, w/x1 link)

(J18)

25 DIMM_A0 (DDR4, Blue, Address:0xA0)

(J8C1)

11 PCI Express Slot (x1 Slot, w/x1 link)

(J17)

26 DIMM_A1 (DDR4, Black,

Address:0xA2) (J8C2)

12 SAS Port (LSI SAS3008, MINI SAS, 2

Port, 12 Gbit/s) (J28)

27 DIMM_B0 (DDR4, Blue, Address:0xA4)

(J8C3)

13 SAS Port (LSI SAS3008, MINI SAS, 2

Port, 12 Gbit/s) (J29)

28 DIMM_B1 (DDR4, Black,

Address:0xA6) (J8C4)

14 USB Port (USB2.0, Type-A, 480M/s)

(J33)

29 ATX 24-Pin Power Supply Connector

(J32, PW1)

15 SATA Port (SATA 3.0, 6 Gbit/s)

(SATA7, J39)

Headers

A PSMI Pin Header (J16) K Reset button (J36)

B System FAN5 Pin Header (J15) L Power button (J37)

C CPU Fan, PIN Header (J14) M System FAN4 Pin Header (J47)

D RS-232_DB-9_COM-Port_2 Pin

Header (J9)

N System FAN3 Pin Header (J48)

E TPM, Debug PIN Header (J13) O System FAN2 Pin Header (J49)

F System FAN Board Pin Header (J19) P System FAN1 Pin Header (J50)

G SSI FP I/O PIN Header (J20) Q IPMB Pin Header (J51)

H USB Header (USB 2.0, 480M/s)* 2

(FP_USB_1)

R LAN2 LED (J23)

I USB Header (USB 3.0, ,5G/s)* 2 (J35) S LAN3 LED (J24)

J SATA SGPIO Pin Header (HBA) (J34)

Page is loading ...

MiTAC Tyan S5542 User manual

MiTAC Tyan S5542 User manual

Related papers

Other documents