KitSound MIAMI User manual

USER MANUAL

MIAMI

WIRELESS SPEAKER

JB. 5784-a/ KSMIA / Made in China. © KitSound is a trademark of Kondor Limited, 2017.

Christchurch, Dorset, BH23 4FL, UK. Christchurch, Dorset, BH23 4FL, UK

All trademarks are acknowledged as the property of their

respective owners. Unless otherwise stated their use

does not imply that the trademark owner is aliated with

KitSound or endorses the products herein.

2 3

Please read this manual carefully before use.

Box contents

• KS Miami

• Micro USB charge cable

• User manual

Functions

1. Mode

2. Multi-function button (MFB)

3. Volume–/Previous track

4. Volume+/Next track

1 2 3 4

[continued...]

4 5

5. Micro SD card reader

6. Aux input

7. Micro USB charge port

8. On/O switch

9. LED indicator

LINE-IN

OFF ON

SD CARD DC 5 V IN

5 6 7 8

[...continued] Functions

6 7

Instructions for use

Charging the battery

Connect one end of the micro USB charge cable to the Micro USB charge port (7) on the Miami

and connect the other end to your PC or USB mains adaptor. The battery will start charging.

• It takes up to 3 hours to fully charge the battery

• Whilst charging, the LED indicator (9) will be solid red

• When fully charged, the LED indicator (9) will turn solid green

Battery protection mode

To keep the rechargeable battery in good condition, please discharge and recharge speaker

every 3 months, especially if you are not using the speaker for long periods of time.

8 9

Getting started

• To turn the Miami on, slide the On/O switch (8) to the ‘On’ position

• To turn the Miami o, slide the On/O switch (8) to the ‘O’ position

Please ensure the rubber feet are free from dirt to prevent the speaker moving/vibrating when

playing music. If the feet need cleaning, simply wipe them with a damp cloth.

Dierent modes

• When you rst turn the Miami on, it will automatically go into pairing mode and the LED

indicator (9) will be quickly ashing blue

• To change to FM, short press Mode (1) and to change to Aux, insert an aux cable into the

Aux input (6) and the Miami will automatically go into Aux mode regardless of what mode

you are currently using

10 11

PLEASE NOTE: If you are connected wirelessly and change to either FM or Aux the Miami

will automatically disconnect from the wireless connection. However when you return to

wireless it will automatically look for the last paired device.

LED indicator colours

Quickly ashing blue wireless pairing mode

Solid blue ready to play music in any mode

Slowly ashing blue playing music wirelessly

Solid red charging

Solid green fully charged

12 13

Wireless setup

Pairing a wireless device for the rst time

1. Slide the On/O switch (8) to the ‘On’ position

2. The LED indicator (9) will ash blue to indicate it is in pairing mode

3. Turn your Bluetooth

enabled device ON and search for available devices

(check your device’s manual if you’re unsure how to do this)

4. Select ‘KS Miami’ from the list of found devices. If asked for a passcode, enter ‘0000’ and the

Miami will then be connected to your device

5. After pairing successfully, the LED indicator (9) will be solid blue

6. The next time the Miami is switched on, it will automatically search for and attempt to connect

to the last paired device

[continued...]

14 15

Note: ’Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way aliated with or

endorsed by Bluetooth SIG Inc.

Note: If your device is not connecting automatically, it’s because it is not the last paired device.

Simply delete ‘Miami’ from the list of Bluetooth devices on your device and re-pair.

Re-pairing or pairing new devices

1. Turn wireless o on any previously paired devices

2. Follow the ‘Pairing a wireless device for the rst time’ instructions

[...continued] Wireless setup

16 17

7. The volume can be adjusted on both your device and the Miami. To change the volume

on the Miami, press and hold the Volume– (3) or Volume+ (4) button until you reach the

desired volume

Note: Track control functions from the buttons on the Miami will require your device to have

Bluetooth

prole AVRCP. Please check your device’s manual if unsure.

Playing audio wirelessly

1. If Miami is in FM mode, short press Mode (1) and it will change to wireless mode

2. Follow the instructions in the ‘Pairing a wireless device’ section

3. Use the controls on your device to select content

4. Audio played through the connected wireless device will now be heard through the Miami

5. To play or pause the selected track, use the controls on your device or short press MFB (2)

6. To skip track, use the controls on your device or short press the Previous track (3) or the

Next track (4) button

18 19

Playing audio via aux-in

1. With the Miami turned on, insert the 3.5 mm audio cable into the Aux input (6). The Miami

will automatically enter Aux mode, and the LED indicator (9) will turn solid blue

2. Plug the other end of the aux cable into the audio/headphone output on an MP3 player

or other audio source

3. Audio played through the connected device will now be heard through the Miami

4. The volume can be adjusted on both your device and Miami. To change the volume on the

Miami, short press the Volume– (3) or Volume+ (4) button several times until you reach the

desired volume

5. Short pressing MFB (2) will mute the speaker but please note, this will not pause the track

on your device

Note: When in Aux mode you will only be able to skip tracks, play, and pause your music from

your device.

20 21

Playing audio via FM

Please note: If signal is poor, please insert the charge cable into the Micro USB charge port (7)

as this will act as an aerial.

1. Slide the On/O switch (8) to the ‘On’ position

2. The LED indicator (9) will ash blue going straight into wireless pairing mode

3. Short press Mode (1) and this will change to FM mode. The LED indicator (9) will be solid blue

4. Long press MFB (2) for 4 seconds and this will start searching all available stations

5. Once all stations have been found, short press the Volume– (3) or Volume+ (4) button to

change to your desired station

6. To change the volume press and hold the Volume– (3) or Volume+ (4) button until you reach

your desired volume

Note: Once the Miami has found the stations, you will not need to re-scan.

22 23

Playing audio via the micro SD

1. Insert micro SD card into the Micro SD card reader (5)

2. Music will automatically play

3. Short press MFB (2) to play/pause music

4. Short press Previous/Next track (3,4) to change track

5. Long press Volume– (3) or Volume+ (4) to decrease/increase volume

PLEASE NOTE: Your device will have an internal amplier and if it is playing digital les like

MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn up the volume to

100%, your device will be sending distorted signals to the Miami. To avoid this and to get the

best sound quality from the speaker, we recommend that you do not run your device any

higher than 95% volume.

24 25

Call-handling

Answer a call When a call comes through, short press MFB (2) to answer. During the

call you can decrease/increase the volume by pressing the Volume– (3)

or Volume+ (4) buttons respectively

End call During a call, short press MFB (2) to end the call

Reject a call When a call comes through, long press MFB (2) for 3 seconds to reject

Redial To redial the last dialled number, short press MFB (2) twice to redial

Note: This feature is only available in wireless mode.

26 27

Care for your Miami

Please DON’T:

• Get the Miami wet

• Drop the Miami as this will invalidate your warranty

• Open up the Miami as there are no user serviceable parts inside

• Expose the Miami to extreme temperatures or rapid changes of hot to cold or vice versa

Please DO:

• Clean the Miami with a soft dry cloth and no detergents

28 29

Specications

Works with Bluetooth

V2.1

Wireless connectivity distance up to 10 m

Output RMS 6 W

S/N 85 dB

Aux input 3.5 mm

Battery Li-ion 2000 mAh

Frequency response 150 Hz – 18 kHz

Play time up to 6 hours

Charging time up to 3 hours

30 31

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems

with anything, please feel free to contact us at: suppor[email protected].uk

Hereby, Kondor Ltd declares that the radio equipment type,

KSMIA Miami Wireless Speaker, is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: http://kondor.co.uk/product-documents.

The use and operation of this speaker is beyond our control. Warranty of the KS Miami is limited to defects caused by faulty

manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user

under any circumstances. This does not aect your statutory rights.

Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an

embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury

and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties.

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of

product improvement and development.

KitSound MIAMI User manual

Related papers

Other documents