jbc CLU7 User manual

jbc
Brand
jbc
Model
CLU7
Type
User manual

The jbc CLU7 is a metal brush for use with CLU & CLR tip cleaners. It features intensive cleaning, a long life cycle, and a black core to distinguish it from the blue core leaded soldering brushes. With a maximum use time of 10 seconds and a recommended use time of 1-2 seconds, it helps maintain the cleanliness of soldering tips. The CLU7 is easy to change and clean, ensuring efficient soldering performance.

The jbc CLU7 is a metal brush for use with CLU & CLR tip cleaners. It features intensive cleaning, a long life cycle, and a black core to distinguish it from the blue core leaded soldering brushes. With a maximum use time of 10 seconds and a recommended use time of 1-2 seconds, it helps maintain the cleanliness of soldering tips. The CLU7 is easy to change and clean, ensuring efficient soldering performance.

CLU7 / CLU8
CLUP1 / CLUP2
CLUP7 / CLUP8
Metal and Non-Metal Brushes
for CLU & CLR
INSTRUCTION MANUAL
Packing List
Brushes for .................. 2 units
CLU & CLR
The following items should be included:
Manual ............................ 1 unit
Ref. 0 0 21174
Features
CLU8 CLU7 CLUP1 /
CLUP2
CLUP7 /
CLUP8
Material Metal Metal Non-Metal* /
Non-Metal HMP*
Non-Metal* /
Non-Metal HMP*
Cleaning Intensive Intensive Gentle Gentle
Max. time use 10 s 10 s 5 s 5 s
Recommended
time use 1-2 s 1-2 s 1-2 s 1-2 s
Life cycle Long Long Extended* Extended*
Core Black Blue Black Blue
*Only use the non-metal brushes when they are rotating. Incorrect use will
damage them.
All brushes are offered with black and blue core, to distingish them
when doing lead-free and leaded soldering.
Non-metal brushes have a longer lifespan than metal brushes.*
This manual corresponds to the following references:
CLMU-A7* CLMU-P1* CLMU-P7*
CLMU-A8
*
CLMU-P2* CLMU-P8*
*each ref. incl. 2 brushes
2
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
Changing Brushes
Before opening the tip cleaner, unplug it from the mains.
Press the brush buttons (1) to
remove the brushes (2).
Align the brush with the axis and
push them in until a click is heard.
Check if the brush is properly fixed.
The CLR splashguard also works
as a tin collector.
1
CLR
Splashguard CLU
CLU Solder
Collection
Tray
CLR
Splashguard
1
For CLR, open the side closures
and remove the slashguard.
For CLU pull the locking tab to
open the splashguard.
Clean the splashguard/solder collection tray, place them back in its position
and close the cleaner.
Brushes (Metal- and Non-Metal) can be cleaned by immersing them in
isopropyl alcohol. They must be allowed to dry before use.
CLU features a solder collection tray.
3
www.jbctools.com
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to
the dealer where it was purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0021174-0222
Specifications
CLU7 / CLU8 / CLUP1 / CLUP2 / CLUP7 / CLUP8
Metal and Non-Metal Brushes for CLU & CLR
Ref.: CLMU-A7 Ref.: CLMU-P1 Ref.: CLMU-P7
Ref.: CLMU-A8
Ref.: CLMU-P2 Ref.: CLMU-P8
- Brush Dimensions: 50 x 50 x 67 mm / 1.97 x 1.97 x 2.64 in
CLMU-A7 / CLMU-A8
- Total Net Weight: 80 g / 0.18 lb
- Package Dimensions/Weight: 140 x 80 x 65 mm / 150 g
(L x W x H) 5.51 x 3.15 x 2.56 in / 0.33 lb
CLMU-P1 / CLMU-P2 / CLMU-P7 / CLMUP-8
- Total Net Weight: 44 g / 0.1 lb
- Package Dimensions/Weight: 140 x 80 x 65 mm / 100 g
(L x W x H) 5.51 x 3.15 x 2.56 in / 0.22 lb
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

jbc CLU7 User manual

jbc
Brand
jbc
Model
CLU7
Type
User manual

The jbc CLU7 is a metal brush for use with CLU & CLR tip cleaners. It features intensive cleaning, a long life cycle, and a black core to distinguish it from the blue core leaded soldering brushes. With a maximum use time of 10 seconds and a recommended use time of 1-2 seconds, it helps maintain the cleanliness of soldering tips. The CLU7 is easy to change and clean, ensuring efficient soldering performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents