The jbc CLMRP is an automatic tip cleaner for robots with two motorized brushes. It features a large-capacity collecting container with easy extraction and a wide opening for easy access to the soldering tip. The CLMRP can be connected to a PLC by a five-pin connector cable and can be turned up to 35º in both directions to facilitate the cartridge tip’s insertion. It also has a splash guard to keep the work area clean and an LED indicator to show the status of the device.
The jbc CLMRP is an automatic tip cleaner for robots with two motorized brushes. It features a large-capacity collecting container with easy extraction and a wide opening for easy access to the soldering tip. The CLMRP can be connected to a PLC by a five-pin connector cable and can be turned up to 35º in both directions to facilitate the cartridge tip’s insertion. It also has a splash guard to keep the work area clean and an LED indicator to show the status of the device.
CLMRP / CLMR
Tip Cleaner for Robot with
Fiber/Metal Brushes
INSTRUCTION MANUAL
2
Packing List
According purchased reference either one or the other cleaner is included:
This manual corresponds to the following references:
- CLMR-PA with Fiber Brushes - CLMR-A with Metal Brushes
Tip Cleaner for Robot
with Fiber Brushes ............................... 1 unit
CL2008 Fiber Brushes (black core) ...... 1 pair
Ref. CL2008 (includes 2 brushes)
Manual ........................................................ 1 unit
Ref. 0029764
Connector Cable (3m) ......................... 1 unit
Ref. 0024563
Tip Cleaner for Robot
with Metal Brushes .............................. 1 unit
CL1008 Metal Brushes (black core) .... 1 pair
Ref. C L1008 (includes 2 brushes)
Connector Cable (3m) ....................... 1 unit
Ref. 0024563
Manual ........................................................ 1 unit
Ref. 0029764
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
3
Features
Splashguard
Keeps the work
area clean
LED Indicator:
Blue: Connected
Green: Working
Red (blinking): Blocked
(Tip too large
or depth limit is
exceeded)
Adjustment Handle
with threaded bolt
Side Closures
Power Connector
CLMRP and CLMR are automatic tip cleaners with two motorized brushes. They feature a large-
capacity collecting container with easy extraction and a wide opening for easy access to the
soldering tip.
Mounting Bracket
Push Button
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
1 3
5
2 4
4
Connection
Power Connector
Pin Color Description
1 Brown Power supply input: 24Vdc (±5%). 2.5A
current required.
2 White Not used
3 Blue Common reference: GND for
power supply and switch.
4 Black Switch input: 0V or 24V to start cleaning.
Leave it open to stop.
5 Grey Not used
CLMRP/CLMR can be connected to a PLC by a five-pin connector cable.
The connector provides “switch” input and power supply.
The input switch manages the cleaner’s activity. It can be connected to a PLC’s digital output and
accepts PNP, NPN or relay contacts.
For detailed information about pin distribution see following table:
Power Connector
Front view
CLMR Power Connector
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
5
Push Button
CL1008 CL1007 CL2008 CL2007
Brush Material Metal Metal Fiber Fiber
Cleaning Intensive Intensive Gentle Gentle
Max. time use 10 s 10 s 5 s 5 s
Recommended
time use 1-2 s 1-2 s 1-2 s 1-2 s
Life cycle Long Long Extended* Extended*
Core Black Blue Black Blue
CLMRP/CLMR can be turned up to 35º in
both directions to facilitate the cartridge tip’s
insertion.
To pivot the CLMRP/CLMR, loosen and tighten
the handle to turning it. The Handle can be
aligned vertically again by pressing the Push
Button.
Work Position Adjustment
Accessories: Brush Ranges
*Only use the non-metal brushes when they are rotating. Incorrect use will damage them.
All brushes are offered with black and blue core, to distingish them when working with lead-free and
leaded solder.
Note: As a refereance, the cleaning process should last around 1 second.
Handle
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
6
Easily replace brushes and clean the solder collector tray as follows:
Unplug CLRMP from the mains and open the
side closures.
Remove the Splashguard and press the
brush‘s buttons (1) to remove them (2).
Align the brush axis with the motor axis and
insert the brushes. Push them in until a click
is heard. Check if the brushes are properly
affixed.
The Splashguard also works as a tin collector
Clean it and place it back in its position.
1
Changing Brushes
1
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
7
Dimensions
mm
(in)
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Work Place Examples
HA Automatic Soldering Set for Robot
HM Soldering Set for Robot
8
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
9
Clean regularly
- Before carrying out maintenance or storage,
unplug the equipment from the mains supply.
- Use a damp cloth to clean the splashguard
outside and inside.
- Keep the brushes clean and replace them
when necessary.
- Periodically check all cables and tube
connections.
- Replace any defective or damaged parts.
Use original JBC spare parts only.
- Repairs should be performed only by a JBC
authorized technical service.
Safety
- Do not use the equipment for any purpose other than tip cleaning. It is not a tool stand.
- Do not leave the equipment unattended when it is on.
- You must turn the device off before changing the brushes.
- The temperature of accessible surfaces may remain high after the equipment is turned off.
Handle with care.
- Heat can cause inflamable products to ignite even when not visible.
- Avoid contact when brushes are rotating.
- Be carefull with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal injury.
- Utmost care must be taken with liquid tin waste which can cause burns.
It is imperative to follow safety guidelines to prevent electric shock,
injury, fire or explosion.
Maintenance
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Notes
10
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Notes
Notes
11
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0029764-281022
Specifications
CLMRP
Tip Cleaner for Robot with Fiber Brushes
Ref.: CLMR-PA
CLMR
Tip Cleaner for Robot with Metal Brushes
Ref.: CLMR-A
- Brush diameter: 50 mm / 2.0 in
- Net Weight: 2737 g / 6.03 lb
- Package Dimensions/Weight: 221 x 136 x 126 mm / 3060 g
(L x W x H) 8.70 x 5.35 x 4.96 in / 6.75 lb
Complies with CE standards.
ESD safe.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
The jbc CLMRP is an automatic tip cleaner for robots with two motorized brushes. It features a large-capacity collecting container with easy extraction and a wide opening for easy access to the soldering tip. The CLMRP can be connected to a PLC by a five-pin connector cable and can be turned up to 35º in both directions to facilitate the cartridge tip’s insertion. It also has a splash guard to keep the work area clean and an LED indicator to show the status of the device.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
jbc SF280 Auto Solder-Wire Handle User manual
-
-
jbc HM470 User manual
-
-
-
jbc CLMU-A User manual
-
-
-
-
