WHITESTONE DOME GLASS is a tempered glass screen protector designed specifically for the Apple Watch. It features a shatter-resistant film that helps protect your watch's screen from impacts and external force. The glass is easy to install with the included jig and adhesive, and it comes with a UV curing machine to ensure a strong bond. The DOME GLASS is also compatible with most phone cases and provides a clear, undistorted view of your watch's display.
WHITESTONE DOME GLASS is a tempered glass screen protector designed specifically for the Apple Watch. It features a shatter-resistant film that helps protect your watch's screen from impacts and external force. The glass is easy to install with the included jig and adhesive, and it comes with a UV curing machine to ensure a strong bond. The DOME GLASS is also compatible with most phone cases and provides a clear, undistorted view of your watch's display.
User Guide
• Please check all manual and attachment videos before using the product.
• Products damaged or damaged by user negligence cannot be exchanged or refunded.
DOME GLASS®
Apple Watch Installation User Guide (EN)
Apple Watch
Please make sure to check manual and installation video before using the product.
Please check the model and components before using the product.
Cautions before Dome glass installation
UV Curing Machine
Not included in the replacement kit.
After checking the Quick guide, check the User guide.
<Quick guide / User guide>
Apple Watch Installation Guide
Tempered Glass Jig
Adhesive
Alcohol Wipes Cleaning Cloth
UV Curing Machine
Not included in the
replacement kit.
Dust Remover
Sticker
Absorption Pad
Components
Reference
Apple Watch Installation Guide
Level Bar
Installation
STEP1
STEP2
After detaching the watch strap, wipe it in turn with using alcohol wipe and
micro ber cloth. Insert the watch in the hole of the bottom jig and
insert the absorption pads into the inserting frame.
Combine the xed tape part of bottom jig and level bar insertion part of the top jig
by pressing the ①→②. Remove the dust using the dust removal sticker.
Level Bar
insertion part
Fixed
Tape
Apple Watch Installation Guide
①
②
Installation
STEP3
Inert the level bar into the xed tape of the bottom jig.
Open the colored cap of adhesive bottle when cap is facing upward vertically.
STEP4
Remove the black cap of the adhesive bottle when the mouth of bottle touches
the Watch, and make sure the bottle located on the center of the arrow mark on the
top jig. Slowly remove the bottle on the Watch after 5 seconds.
5 sec
Apple Watch Installation Guide
Installation
STEP5
After removing the liner lm on the back side of the tempered glass,
align the tempered glass on the bottom part of the top jig.
(in the direction with no xed tape attached) Position it above the Level Bar.
①
①
②
②
③
¬�
STEP6
After tilt the jig by pressing the bottom part of the lower jig of the "Push" part, remove
the level bar immediately as soon as adhesive touches the tempered glass while pressing
the jig. Then remove the hand of holding the lower jig.
(Wait 30 seconds for the adhesive to spread.)
Remove the
level bar
Apple Watch Installation Guide
Installation
STEP7
Place the small UV machine in the center of the installation jig,
then harden the tempered glass for 15 sec. After the rst curing,
remove the top jig, and use the hole of the bottom jig to lightly push to
separate the absorbing pad and the Watch.
STEP8
Wipe the remaining adhesive around the Watch with alcohol swab.
Placed the cleaned watch on oor, and then cured the 2nd curing with the
same process as 1st curing for 60 sec.
①
②
③
Apple Watch Installation Guide
Please check the installation Guide.
Precautions after installation
Precautions when removing the tempered glass
CONTACT US
HOMEPAGE
GlobalA/S
WHITESTONE Ltd.
Seesaw Installation Guide
Copyright ⓒ 2021 Whitestone Ltd. All rights reserved.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
WHITESTONE DOME GLASS is a tempered glass screen protector designed specifically for the Apple Watch. It features a shatter-resistant film that helps protect your watch's screen from impacts and external force. The glass is easy to install with the included jig and adhesive, and it comes with a UV curing machine to ensure a strong bond. The DOME GLASS is also compatible with most phone cases and provides a clear, undistorted view of your watch's display.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
WHITESTONE Galaxy Z Fold 2 User guide
-
WHITESTONE S10 PLUS User guide
-
WHITESTONE DOME GLASS User guide
-
WHITESTONE Galaxy S21 Installation guide
-
WHITESTONE Galaxy Z Fold 3 5G User guide
-
-
WHITESTONE Galaxy Z Flip 3 Installation guide
-
WHITESTONE DOME Premium Genuine Film User manual
-
-
WHITESTONE Dome Silk Ultra Thin Glass User guide
Other documents
-
WHITESTONE DOME iPhone 13 & 13 Pro Dome Glass Tempered Glass Screen Protector Operating instructions
-
3M Door PC3 User manual
-
Gentex SPH-5 Installation Instructions Manual
-
Silestone WOH8802 Operating instructions
-
Gerber SOLARA UV2 Owner's manual
-
MIMAKI UJF-3042MkII Operating instructions
-
MIMAKI UJF-7151 plus Operating instructions
-
-
Samsung S099MPP2IJ User guide
-
MIMAKI JFX200-2513 Operating instructions
