• Please check all manual and attachment videos before using the product.
• Products damaged or damaged by user negligence cannot be exchanged or refunded.
User Guide for/four Galaxy Z Flip 3 5G
DOME PREMIUM GENUINE FILM
Installation User Guide (EN)
Dome Premium Genuine Film Installation User Guide
Please make sure to check manual and installation video before using the product.
Please check the model and components before using the product.
Cautions before Dome silk installation
After checking the Quick guide, check the User guide.
<Quick guide / User guide>
Dome Premium Genuine Film Installation User Guide
Squeegee
Reference
Components
Jig
Align block
Alcohol WipesCleaning Cloth
Dust Remover
Sticker
Film
Remover
Dome Premium Genuine Film Installation User Guide
Installation
STEP1
STEP2
Remove the protection lm attached to your device using the Remover.
Connect the Align block to top part of the JIG.
※Correct gudie lm removal direction※
※Incorrect gudie lm removal direction※
Dome Premium Genuine Film Installation User Guide
Installation
STEP3
Insert the device into the JIG in correct direction.
Top – Speaker
Bottom – Connector
STEP4
Clean the display with alcohol wipe and cleaning cloth.
Then, remove any dust with dust removal sticker.
Dome Premium Genuine Film Installation User Guide
TOP
Film
liner film
TOP
Film
liner film
Installation
STEP5
Hold the top part of the lm as shown, and bend the [1 sticker] as shown in [Figure 1].
Like [Figure 2] Make sure that the protective lm and pet lm are properly separated and
slowly remove the protective lm. If it is as shown in [Figure 3], attach the protective lm as if
it is in the rst state and remove it carefully so that only the protective lm can be removed.
※Correct sticker removal direction※
※Incorrect sticker removal direction※
※In the case of the above,
there is a sound of tearing the tape※
[Figure 1]
[Figure 2]
[Figure3] Film and protective lm are separated together.
STEP6
Flip the lm with the protective lm removed so that the top/bottom text are visible to the front.
1) Insert the top part of the lm into the Align block.
2) Insert the bottom part of the lm into the bottom part of the JIG.
1
①
②
REMOVE
Dome Premium Genuine Film Installation User Guide
천천히 부착 하세요
STEP7
Hold the top end of the lm and slowly and forcefully push up with the squeegee from
the bottom of the jig to the top while maintaining squeegee in a lean angle.
Push the squeegee all the way to the end.
Slowly
Start
Installation
<Directions of Use>
Dome Premium Genuine Film Installation User Guide
Installation
STEP8
Remove the guide lm from Jig's hole while pressing the ①-top/②-bottom of the lm
with a squeegee. ③Push the lm entirely to the short side of the squeeze.
Push the squeegee in
a horizontal direction.
<Directions of Use>
<Directions of Use>
x
③
①
②
Dome Premium Genuine Film Installation User Guide
Installation
STEP9
Bend the guide lm attached to the lm and remove it from the top.
Finish by pressing the lm edge with the short part of the squeegee.
Remove the device from the JIG.
<Directions of Use>
※Correct gudie lm removal direction※
※Incorrect gudie lm removal direction※
Dome Premium Genuine Film Installation User Guide
Please check the installation Guide.
Precautions after installation
CONTACT US
HOMEPAGE
GlobalA/S
WHITESTONE Ltd.
Copyright ⓒ 2021 Whitestone Ltd. All rights reserved.
/
