2. WHITESTONE DOME
  3. iPhone 13 & 13 Pro Dome Glass Tempered Glass Screen Protector
iPhone 13 & 13 Pro Dome Glass Tempered Glass Screen Protector

WHITESTONE DOME iPhone 13 & 13 Pro Dome Glass Tempered Glass Screen Protector Operating instructions

  • Hello! I've reviewed the provided user manual for tempered glass re-installation. This document includes steps on removing the jig and tempered glass, cleaning adhesive from both the device and the glass, and reattaching the protective film. I'm ready to answer any questions you have about these instructions.
  • What should I do if the tempered glass does not adhere properly?
    How do I remove the tempered glass from the device?
    What should I use to clean the adhesive from the device?
    What do I need to do after removing the adhesive from the device and the glass?
1
2
3
4
Remove the JIG from the device.(Refer to step7)
Remove the tempered glass on the device and 󼴪ip it over and place it on the tissue.
The adhesive on the device is absorbed using a tissue and removed.
Remove using alcohol wipes and cleaning Cloth.
The adhesive on the tempered glass is absorbed using a tissue and removed.
Remove using alcohol wipes and cleaning Cloth.Be careful not to scratch.
Attach the protective 󼴩lm removed from STEP5 to the tempered glass.
Proceed from STEP1 and reattach (use extra adhesive).
• If too much force is used when cleaning the tempered glass,
tempered glass may be damage so be careful.
Before curing, the tempered glass did not adhere properly!
Adhesive doesn't spread completely on the screen! Please check the manual and the video for re-installation.
Re-installation Video
before curing
/