Intermec CK60 Ethernet Multidock Operating instructions

CK60 Ethernet Multidock
Intermec
Brand
Intermec
Model
CK60 Ethernet Multidock
Type
Operating instructions

This manual is also suitable for

Intermec CK60 Ethernet Multidock seamlessly integrates with Intermec CK60 mobile computers to provide wired Ethernet connectivity in various applications, including kiosks, fixed workstations, and vehicle mounts. It's ideal for use in warehouses, distribution centers, and manufacturing facilities where reliable and fast wired Ethernet connections are essential.

Intermec CK60 Ethernet Multidock seamlessly integrates with Intermec CK60 mobile computers to provide wired Ethernet connectivity in various applications, including kiosks, fixed workstations, and vehicle mounts. It's ideal for use in warehouses, distribution centers, and manufacturing facilities where reliable and fast wired Ethernet connections are essential.

The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*962-000-055A*
P/N 962-000-055A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*962-000-055A*
P/N 962-000-055A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*
962-000-055A*
P/N 962-000-055A
CK60 Handheld Computer Bumpers
CK60 Handheld Computer Bumpers CK60 Handheld Computer Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
  • Page 1 1

Intermec CK60 Ethernet Multidock Operating instructions

CK60 Ethernet Multidock
Intermec
Brand
Intermec
Model
CK60 Ethernet Multidock
Type
Operating instructions
This manual is also suitable for

Intermec CK60 Ethernet Multidock seamlessly integrates with Intermec CK60 mobile computers to provide wired Ethernet connectivity in various applications, including kiosks, fixed workstations, and vehicle mounts. It's ideal for use in warehouses, distribution centers, and manufacturing facilities where reliable and fast wired Ethernet connections are essential.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers