Vivo DESK-V101ED User manual

Brand: Vivo

Model: DESK-V101ED

Type: User manual

White 48" Electric Drafting Desk

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/desk-v101ed

SKU: DESK-V101ED

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or

inappropriate use.

WARNING!

ELECTRICAL SAFETY INSTRUCTIONS

THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC

SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.

• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.

• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR

SELLER TO REPLACE DAMAGED PARTS.

• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE

MADE CONTACT WITH LIQUIDS.

• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.

• OUTDOOR USE IS PROHIBITED.

PACKAGE CONTENTS

A (x1)

Desktop

B (x1)

Crossbar

C (x1)

Wrist Rest

S-A (x16)

M6x12mm

Bolts

S-B x4)

M6x6mm Bolt

S-C (x4)

M4x5mm Bolt

S-D (x4)

5/8" Screw

H (x1)

Liing

Column

D (x1)

Sync Rod

E (x2)

Foot

F (x1)

Control Unit

G (x1)

Liing

Column

S-E (x1)

Allen Key

S-F (x3)

Cable Clip

K (x1)

Adapter

I (x1)

Shelf

J (x2)

Hook

L (x1)

Control

Panel

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

TOOLS NEEDED

ASSEMBLY STEPS

STEP 1

Phillips

Screwdriver

STEP 2

120lbs

(54.43kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Assemble liing columns (G, H) to the desktop (A)

using 8 M6x12mm bolts (S-A) and Allen key (S-E).

Leave the screws loose with 3mm of thread exposed.

NOTE: Insert all necessary screws into holes before

completely tightening.

Mount the crossbar (B) to the columns using M6x6mm bolts (S-B). Tighten all screws with the

Allen key (S-E).

S-B

S-A

STEP 3

Assemble the feet (E) to the columns using 8

M6x12mm bolts (S-A) and tighten with the Allen key

(S-E). Make sure the longer ends of the feet (E) are

facing towards the front of the desk.

STEP 4

STEP 5

Loosen the knobs on each end of the sync rod (D). Slide the socket end onto the motor sha and

tighten the knob to secure. Extend the hex sha into the socket in the other leg and tighten the knob to

secure.

Install hooks (J) to shelf (I) using M4x5mm bolts (S-C) and tighten with Phillips screwdriver.

S-A

STEP 5 (continued)

STEP 6

Mount the shelf to the underside of the desktop using two 5/8" screws (S-D) with a Phillips screwdriver.

Rest control unit (F) on shelf. Connect cables for motor, power (K) and control panel (L).

Mount the control panel (L) to the desktop using two 5/8"screws (S-D) and tighten with a Phillips

screwdriver. Use cable clips (S-F) to organize cables.

S-F

S-D

STEP 6 (continued)

If needed, adjust foot pads to level desk on uneven floor. Li handle to raise or lower front desktop

surface.

Remove the backing from the wrist rest (C) and place near the front edge of the desktop.

Li handle to raise or lower front desktop surface.

CAUTION!

Failure to follow these instructions may result in property damage and/or personal injury.

Do not exceed desk weight limit. Keep area of vertical motion free of

obstacles.

Keep weight on desk balanced for

correct operation and longer life of

components.

Leave enough slack in cables to

allow for full range of vertical

motion.

LAST UPDATED: 03/04/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected]

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Vivo DESK-V101ED User manual

Vivo DESK-V101ED User manual

Vivo DESK-V101ED User manual

Related papers

Other documents