Vivo DESK-M55TB Assembly Instructions

Vivo
Brand
Vivo
Model
DESK-M55TB
Type
Assembly Instructions
Crank Height Adjustable Desk - Black
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-m55tb
SKU: DESK-M55TB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
WARNING!
A (x2)
Liing
Column
TOOLS NEEDED
Phillips
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
88lbs
39.92kg
B (x1)
Sync Rod
D (x1)
Lower Crossbar
E (x1)
Desktop
S-A (x4)
Short Hex
Head Bolt
S-C (x4)
Long Hex
Head Bolt
C (x1)
Upper Crossbar
S-B (x6)
Phillips Head Bolt
Level
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
F (x1)
Crank
S-D (x9)
Pad
S-F (x1)
Allen Wrench
S-E (x6)
Washer
3
ASSEMBLY STEPS
STEP 1
Stand up the liing columns (A) and insert the sync rod (B) into the socket on each column. Use the
crank (F) to align columns if needed.
STEP 2
Assemble the upper crossbar (C) to the top of the columns using the long hex head bolts (S-C) and
the lower crossbar (D) to the back using short hex head bolts (S-A). Tighten all bolts using the
Allen wrench (S-F).
4
STEP 3
Apply the pads (S-D) to the top of the assembled frame.
STEP 4
Place the desktop (E) on top of the frame. Secure using the Phillips head bolts (S-B) with washers
(S-E), and tighten with a Phillips screwdriver.
5
STEP 5
Insert the crank (F) into the hex socket of the liing column.
Figure 1: Turn the crank to raise or lower the
desk.
Figure 2: Store the crank in the rear of the desk
support bracket on the column as shown.
Figure 3: Turn the foot pads to adjust the desk
level.
Figure 4: Use a bubble level to ensure the desk is
sitting perfectly level.
6
3
STEP 5 (Continued)
7
3
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk weight limit. Keep area of vertical motion free of
obstacles.
Keep weight on desk balanced for
correct operation and longer life of
components.
Leave enough slack in cables to
allow for full range of vertical
motion.
LAST UPDATED: 09/15/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected]
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Vivo DESK-M55TB Assembly Instructions

Vivo
Brand
Vivo
Model
DESK-M55TB
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents