fully Jarvis Assembly Instructions

Jarvis desk shelf

Assembly instructions

For assembly assistance,

call 888-508-3725

or email support@fully.com

step 1

step 2

Crossbar Screws x4-6

qty depends on shelf size

version 111517-a

Columns x2

Align the Crossbar holes with the predrilled holes on the underside of the Shelf and secure the Crossbar with the

Crossbar screws. Be sure the Crossbar column holes (shown above) are facing the back of the Shelf.

Jarvis desk shelf

Crossbar x1 Column Screws x2

Slide the Columns into position on the Crossbar. Line up the holes on the back of the Columns with the Crossbar

column holes and secure the Columns to the Crossbar with the two (2) Column Screws.

step 3

Double check all screws from Steps 1 and 2 are tight. Slide the completed shelf onto the edge of your desk and

tighten the clamps securely.

Shelf x1

4mm Hex Key x1

Download PDF