Folding 43” Computer Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-fd1qb
SKU: DESK-FD1QB
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
STEP 3
WARNING!
1 (x1)
Tabletop
2 (x2)
Leg
3 (x4)
Foot
STEP 4
4 (x7)
Knob
Scissors
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3
YEARS. ADULT SUPERVISION IS REQUIRED.
5 (x1)
Support Bar
6 (x2)
Plastic Spacer
7 (x7)
Washer
8 (x1)
Connecting X Bar
STEP 1
STEP 2
Carefully remove tabletop (1) and
components from the packaging
and set on a flat surface.
Screw feet (3) into
bottom holes of
legs (2). Stand
legs up and place
support bar (5)
on top as shown,
making sure holes
line up.
Secure support bar to legs using knobs (4)
with washers (7). Unfold connecting X bar
and secure to backs of legs using knobs,
washers and spacers (6). The spacers are
used between the rear bar of connecting X
bar (8) and the legs.
Place tabletop (1) on assembled frame,
aligning security pins with legs and support
bar. Press security pins through holes to
secure tabletop to frame.
3
110 lbs
(50 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
STEP 5
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
STORAGE STEPS
STEP 1 STEP 2
Screw knob with washer into center hole of support bar for additional security. The desk is
now ready to use.
Remove center knob from support bar. For
each pin, press the button and pull the pin
back to release the desktop from the frame.
Li the desktop from the frame and set
aside.
Remove knobs securing support bar, then
remove support bar and set aside. Remove
top two knobs from connecting X bar and
fold frame flat. Knobs with washers and
spacers may be screwed back into legs to
prevent them from becoming lost.
LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/