Vivo DESK-V101EC Assembly Instructions

Brand: Vivo

Model: DESK-V101EC

Type: Assembly Instructions

Black Electric Premium Single Column Desk Leg

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/desk-v101ec

SKU: DESK-V101EC

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or

inappropriate use.

PACKAGE CONTENTS

WARNING!

A (x1)

Support Bar

B (x1)

Liing Column

C (x1)

Base

S-A (x6)

Hex Flange

Bolts

S-B x4)

Hex Flange

Bolts

S-C (x8)

Philips Head

Screw + 1 Spacer

S-D (x3)

Cable Clip

H (x1)

Control Panel

D (x4)

Foot

E (x1)

Adapter

F (x2)

Cable Clip

G (x1)

Power Cable

ELECTRICAL SAFETY INSTRUCTIONS

THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC

SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.

• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.

• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR

SELLER TO REPLACE DAMAGED PARTS.

• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE

MADE CONTACT WITH LIQUIDS.

• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.

• OUTDOOR USE IS PROHIBITED.

S-E (x6)

Anti-Vibration

Pad

S-F (x1)

Allen

Wrench

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

TOOLS NEEDED

110lbs

(49.90kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

Press anti-vibration pads (S-E) into top of support bar

(A). Insert liing column (B) into underside of support

bar as shown, making sure the motor cable is placed

through the slot in front. Secure the liing column using

short hex flange bolts (S-A) and tighten with the Allen

wrench (S-F).

Phillips

Screwdriver

STEP 2

Assemble the base (C) to the underside of the

liing column using long hex flange bolts (S-B)

and tighten with the Allen wrench (S-F).

Level

S-A

S-E

S-F

S-B

S-F

STEP 3

Attach the control panel (H) to the le-front or right-front of the desktop using x2 Phillips head screws

with spacers (S-C).

STEP 5

Screw the feet (D) into the base.

STEP 4

Place the desktop upside down on a flat

surface and position the leg/base assembly

upside down on the desktop. Secure the

assembly using x6 Phillips head screws with

spacers (S-C), and tighten with a Phillips

screwdriver.

S-C

Desktop (Not Included)

S-C

STEP 6

Route motor cables through slots and connect to the control panel (H).

STEP 8

Install the power cable (G) to the socket in the adapter, then route through the cable hole in the base.

STEP 7

Place the adapter (E) into the support bar as shown. Connect the

control panel cable to the adapter.

STEP 9

Check desk level using a bubble level, and turn feet to make corrections.

STEP 10

Attach the cable management clips (F) to

the liing column to hold the power cable in

place. Ensure the power cable has enough

slack between the desktop and the clips

for proper movement of the desk. Peel the

backing from the cable clip (S-D) and stick

to underside of desktop between the control

panel and adapter to manage cables.

S-D

CAUTION!

Failure to follow these instructions may result in property damage and/or personal injury.

Do not exceed desk weight limit. Keep area of vertical motion free of

obstacles.

Keep weight on desk balanced for

correct operation and longer life of

components.

Leave enough slack in cables to

allow for full range of vertical

motion.

LAST UPDATED: 03/04/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected]

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Vivo DESK-V101EC Assembly Instructions

Vivo DESK-V101EC Assembly Instructions

Vivo DESK-V101EC Assembly Instructions

Related papers

Other documents