2. RAB Lighting
  3. SM-EM-RBAY17S

RAB Lighting SM-EM-RBAY17S User manual

  • Hello! I've reviewed the instructions for the Surface Mount Kit SM-EM-RBAY17S. This document outlines the steps for safely installing the surface mount bracket for RAB fixtures, emphasizing secure mounting using hook features and screws. I'm ready to answer your questions about the installation process or the kit's features.
  • What is the model number of the surface mount kit?
    What type of screws are used to secure the bracket?
    In which direction should the fixture be slid into the bracket?
    How many housing slots does the bracket have?
    How many hook features has the bracket?
INSTRUCTIONS
RBAY17S/E SURFACE MOUNT KIT INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining  xture.
SURFACE MOUNT BRACKET INSTALLATION SMALL MODEL ONLY
Housing
SurfaceMount Bracket
(SM-EM-RBAY17S)
FIG. 1
xxxxxx - IN - 1022
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2022 RAB LIGHTING Inc.
P-100192
Emergency Driver Box
Screws (2)
SM-EM-RBAY17S
((Accessory ordered separately - Model # SM-EM-RBAY17S)
1. Install Surface Mount Bracket to mounting surface with suitable hardware (not included).
2. Slide the fi xture with the Emergency Driver Box into the Surface Mount Bracket in the direction of arrows as shown in Fig. 1.
3. Fasten the Surface Mount Bracket onto Housing by locking it into the Housing Slots using the Hook Features.
4. Secure the Surface Mount Bracket with (2) two M4x6 Screws (provided) as shown in Fig. 2.
Housing Slots (4)
Hook Features (4)
Surface Mount Bracket
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
FIG. 2
/