Failure to follow these basic steps can lead to damage that is not covered by your warranty.
• Read instructions carefully. Ensure no parts are missing.
• Lay out all the components on a soft surface.
• Carefully identify each component, especially those that are similar. The most
common mistake is getting things back to front.
• Do not fully tighten screws (leave slightly loose). When the item is fully assembled,
tighten the screws but do not over tighten.
• Separate and identify each component from the hardware pack and rest each one
in its proper location before fastening.
• Do not, for any reason, use a power tool to assemble this product.
Use of power tools may apply greater than excess force on the
fixtures, causing damage. Warranty is void if power tools have
been used.
• A Phillips head screwdriver (not supplied) is required for assembly.
The user guide enclosed refers to multiple sets of metal slide runners and slide tracks
(pictured above separately).
To avoid any damage to these items during transportation, the slide runners and slide
tracks have been pre-assembled together in pairs. Each pair includes a slide runner and
slide track. Before assembling your new Shangri-La unit, please separate the slide runners
from the slide tracks according to the below instructions.
SAFETY & WARNINGS
Slide Track
Slide runner
