SHANGRI-LA SLBUSSKTWB Stainless Steel Kitchen Trolley User guide

  • Hello! I've reviewed the user guide for the BURNIE stainless steel kitchen trolley. This document provides a detailed, step-by-step approach for assembling your new trolley, from separating the slide runners to securing the castors. I am familiar with the parts list and all 13 assembly steps, and I'm ready to answer your questions about the process or features of the trolley.
  • What type of screwdriver is needed for assembly?
    How to detach Slide Runner from Slide Track?
    How many steps are in the assembly process?
BURNIE STAINLESS STEEL
KITCHEN TROLLEY
SLBUSSKTWA, SLBUSSKTWB
COMPONENTS
Hardware
1 65mm M6
screw (x14) 2 Barrel nut (x14) 3 Hinge (x2) 4 Handle (x2)
5 18mm M4
screw (x2) 6 Stopper (x1)
7 12mm M3.5 screw
(x12)
8 35mm M3.5
screw (x4)
9 14mm M3.5
screw (x15)
10L Left runner and
track set (x1)
10R Right runner
and track set (x1) 11 Dowel (x10)
12 Cam lock (x4) 13 Cam screw (x4)
14 14mm M4
screw (x2)
15 Locking castor
(x2)
16
Castor
(x2)
A Phillips head screwdriver (not supplied) will be required to assemble this kitchen trolley.
Runner and track sets
The user guide refers to multiple sets of metal Slide Runners and Slide Tracks (pictured
above separately).
To avoid any damage to these items during transportation, the Slide Runners and Slide
Tracks have been pre-assembled together in pairs. Each pair includes a Slide Runner and
Slide Track. Before assembling your furniture, please separate the Slide Runners from the
Slide Tracks according to the below instructions.
Step 1: Extend the Slide Runners apart from the Slide Track
BEFORE ASSEMBLY
Slide Track
Slide Runner
Step 2: Gently press the plastic release lever on the Slide Runner while pulling the Slide
Runner and Slide Track apart from each other.
Step 3: The Slide Runner and Slide Track should now be separated. Repeat these steps for
all remaining pairs of Slide Runners and Slide Tracks.
Slide Runner
Slide Track
Step 1:
Step 2:
3 (x2)
6 (x1)
9 (x7)
1 (x2)
2 (x2)
11 (x2)
ASSEMBLY
Step 3:
Step 4: Using a Phillips head screwdriver, secure the left and right runners (10L, 10R) to parts
K and L with four 12mm M3.5 screws (7).
Secure parts K and L to parts M and N using four 35mm M3.5 screws (8).
7 (x4)
8 (x4)
10L (x1)
10R (x1)
6 (x1)
9 (x2)
11 (x2)
Step 5: Insert four cam screws (13) into part J, then using a Phillips head screwdriver, insert
four cam locks (12) into both parts K and L.
Align part J with both parts K and L. Ensuring the arrows on the cam locks (12) are pointing
towards the corresponding cam screws (13), secure the cam locks (12) into the cam screws
(13) to connect part J to parts K and L.
Secure the handle (4) to part J using two 14mm M4 screws (14).
4 (x1)
12 (x4)
13 (x4)
14 (x2)
Step 6:
1 (x4)
2 (x4)
Step 7:
2 (x4)
11 (x8)
Step 8:
1 (x4)
Step 9:
15 (x2)
16 (x2)
Step 10:
1 (x4)
2 (x4)
Step 11:
3 (x2)
4 (x1)
5 (x2)
9 (x6)
Step 12: Secure the left and right tracks (10L, 10R) onto the assembly with four 12mm M3.5
screws (7).
7 (x4)
10L (x1)
10R (x1)
Step 13:
Assembly is complete.
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
1/16