2. Anolis
  3. Ambiane
Ambiane

Anolis Ambiane User manual

  • Hello! I've analyzed the provided document outlining the installation instructions for the Anolis Ambiane Power Rack. This document covers important steps, such as power connection and physical mounting into a 19-inch equipment rack. I am ready to answer any questions you may have about the installation process or features of the power rack.
  • Who should install the Ambiane Power Rack?
    What is the Ambiane Power Rack designed for?
    How many LED outputs does the Ambiane Power Rack have?
INSTALLATION INSTRUCTIONS
AMBIANE POWER RACK
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: inf[email protected] | www.anolislighting.com
VERSION 1.0 / 11_2021 1
The unit must be installed by a qualied electrician in accordance with all national and local electrical
and construction codes and regulations. This device falls under class I and must be grounded!
Install a terminal block on power cable and connect to the Ambiane Power Rack.
STEP 1
AMBIANE POWER RACK CONNECTION (ONLY POWER)
Connection of luminaire‘s power supply and Ambiane Power
Rack.
The Ambiane Power Rack has 8 LED outputs and is desing for
mounting into 19-inch equipment rack.
3
INSTALLATION INSTRUCTIONS
AMBIANE POWER RACK
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: inf[email protected] | www.anolislighting.com
VERSION 1.0 / 11_2021 2
STEP 2
AMBIANE POWER RACK INSTALLATION
Fasten the Ambiane Power Rack into rack by means of two
screws on each side of the Ambiane Power Rack .
Insert the Ambiane Power Rack into the 19“ equipment rack.
1 2
/