Anolis Ambiane Installation guide

Ambiane
Anolis
Brand
Anolis
Model
Ambiane
Type
Installation guide

Anolis Ambiane is a versatile lighting solution designed for professional use in various indoor applications. With its powerful LED technology, it delivers high-quality illumination with precise color rendering. Ambiane offers flexible control options via DMX or DALI, allowing for seamless integration into existing lighting systems. It features adjustable hanging wire length and downward orientation for customized positioning, making it suitable for a range of applications such as retail spaces, hospitality venues, and museums.

Anolis Ambiane is a versatile lighting solution designed for professional use in various indoor applications. With its powerful LED technology, it delivers high-quality illumination with precise color rendering. Ambiane offers flexible control options via DMX or DALI, allowing for seamless integration into existing lighting systems. It features adjustable hanging wire length and downward orientation for customized positioning, making it suitable for a range of applications such as retail spaces, hospitality venues, and museums.

INSTALLATION INSTRUCTIONS
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: [email protected]
www.anolis.eu www.anolislighting.com
AMBIANETM XP56 PENDANT REMOTE
3
VERSION 1 / 10_05_2021
1
The unit must be installed by a qualified electrician in accordance with all national and local electrical
and construction codes and regulations. ws
STEP 1
CEILING ADAPTER INSTALLATION
Screw the spherical cap with the hanging wire to the ceiling plate.
Recommendation- use thread glue LOXEAL 5503 to prevent self
loosening of the adaptor.
Fasten the adapter to the lower ceiling.
Fasten the control unit on the ceiling by means of two holes in the
control units housing
Drill the hole Ø8mm in the lower ceiling for the LED unit supply
cable. If you wish to have the LED unit supply cable parallel with
the hanging wire, the distance between the hanging wire and the
LED unit supply cable should be 60mm
STEP 2
CONTROL UNIT INSTALLATION
2
3
1
INSTALLATION INSTRUCTIONS
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: [email protected]
www.anolis.eu www.anolislighting.com
AMBIANETM XP56 PENDANT REMOTE
3
VERSION 1 / 10_05_2021
2
STEP 3
LED UNIT CABLE CONNECTION
Install terminal block on primary power cable and connect it to the control unit.
LED Unit Connection
TERMINAL
BLOCK + A B -
Colour of Wire Red White Blue Black
Strip these lengths for cable connections.
Pull the LED unit‘s cable through prepared hole in the ceiling and
secure it above ceiling. Install a terminal block on the cable and
connect it to the control unit.
STEP 4
PRIMARY POWER CONNECTION
1A 1B
2
3
1
Shorten the cable to required length.
INSTALLATION INSTRUCTIONS
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: [email protected]
www.anolis.eu www.anolislighting.com
AMBIANETM XP56 PENDANT REMOTE
3
VERSION 1 / 10_05_2021
3
Press down the pin on the wires connector for length adjustment.
STEP 7
ADJUSTING THE HANGING WIRE LENGTH
Fasten the LED unit‘s cable to holder using a cable binder.
3
2
STEP 5
SECONDARY POWER CONNECTION 48V
(PSU SCOPE OF OTHERS)
Install terminal blocks on DMX or DALI cables and connect them
to the control unit.
DMX CONNECTION
0V D- D-
Data Ground Data - Data +
Set the DIP switches to positions according to your operation
mode. The fixture can be controlled by DMX or DALI.
Set 11=OFF for control by DMX or DALI.
STEP 6
IN/OUT DATA CHAIN CONNECTION
Install terminal block on secondary power cable and connect it to
the control unit.
1
2
21
Press down pins on the hanging wires anchors for length and
downward orientation adjustment.
Store an redundant cable as instructed on the picture above.
Maximum of one full loop to prevent overheating.
4
  • Page 1 1
  • Page 2 2
  • Page 3 3

Anolis Ambiane Installation guide

Ambiane
Anolis
Brand
Anolis
Model
Ambiane
Type
Installation guide

Anolis Ambiane is a versatile lighting solution designed for professional use in various indoor applications. With its powerful LED technology, it delivers high-quality illumination with precise color rendering. Ambiane offers flexible control options via DMX or DALI, allowing for seamless integration into existing lighting systems. It features adjustable hanging wire length and downward orientation for customized positioning, making it suitable for a range of applications such as retail spaces, hospitality venues, and museums.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents