SMITH SYSTEM 179908 Assembly Instructions

Hello! I've reviewed the Quick Installation Guide for the SMITHSYSTEM Lectern model 04619. This document provides a simple two-step process for setting up the lectern using self-adhesive bumpers. It also specifies the components needed for the installation, such as the pre-attached top with a pencil groove. I'm ready to help if you have any questions about assembling or the device itself.
What is the first step in assembling the lectern?

How many adhesive bumpers are needed for installation?

What components are pre-attached?

Step 1 Flip the lectern over so that the

lectern top is sitting on the ﬂoor.

Attach the self adhesive bumpers at

the corners.

Step 2 Congratulations! e lectern is

fully assembled and ready for use.

Instructions

Deluxe Table Top Lectern Quick Installation Guide

Required for Installation

- 4 adhesive bumpers

- Lectern cabinet

- Top with pencil groove (pre-attached)

- Retaining angle (pre-attached)

Form # 179908 Rev. 11/2006

MODEL

04619